GB/T 17470-2007 in English

《GB/T 17470-2007玻璃纤维短切原丝毡和连续原丝毡》由TC245（全国玻璃纤维标准化技术委员会）归口，主管部门为中国建筑材料联合会。
本标准规定了玻璃纤维短切原丝毡和连续原丝毡的分类和代号、产品规格、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于增强塑料和增强胶凝材料的玻璃纤维短切原丝毡和连续原丝毡。对于玻璃纤维短切单丝毡和玻璃纤维针刺毡也可参照采用。

1 Scope

This standard specifies the classification and code, product specification, requirements, test methods, inspection rules, marking, packaging, transportation and storage of chopped strand and continuous filament mats (hereinafter referred to as “mats”) made from glass fiber.
This standard is applicable to chopped strand mats made from glass fiber (hereinafter referred to as "chopped strand mats") and continuous filament mats made from glass fiber (hereinafter referred to as "continuous filament mats") used for the reinforcement of plastics and hydraulic matrices. It may also be applicable to glass fiber continuous monofilament mats and punched mats.
This standard is not applicable to stitched bonded mats and veils made from glass fiber, nor to glass fiber mats used for thermal and sound insulation.

2 Normative References

The following normative documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB/T 191 Packaging — Pictorial marking for handling of goods
GB/T 1449 Fiber-reinforced plastic composites — Determination of flexural properties
GB/T 1549 Methods of chemical analysis of soda-lime-alumina and borosilicate glass
GB/T 6006.1 Test method for glass mats — Part 1:Determination of styrene solubility
GB/T 6006.2 Test method for glass mats — Part 2:Determination of tensile breaking force
GB/T 7193.1 Unsaturated polyester resin determination of viscosity
GB/T 9914.1 Test method for reinforcement products — Part 1:Determination of moisture content (GB/T 9914.1-2001, idt ISO 3344:1997)
GB/T 9914.2 Test method for reinforcement products — Part 2:Determination of combustible-matter content for glass (GB/T 9914.2-2001, eqv ISO 1887:1995)
GB/T 9914.3 Test method for reinforcement products — Part 3:Determination of mass per unit area (GB/T 9914.3-2001, idt ISO 3374:2000)
GB/T 20309 Textile glass — Mats and fabrics — Determination of contact mouldability
3 Classification and Designation