Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)
lower-limb prostheses limb prostheses principal structural tests prostheses structural testing conceptual physical services coal mines scopethis standard specifies impeller type
GB/T 18375.4-2001 in English

GB/T 18375.4-2001 in English

SUPERSEDED

Prosthetics - Structural testing of lower-limb prostheses - Part 4: Loading parameters of principal structural tests

  • Issued on:2001-05-02
  • Implemented on:2001-12-01
  • File Format:PDF
  • Delivery:Via email within 1~3 business days
Price(USD): $130.00
$127.00
Standard No: GB/T 18375.4-2001
Document status: SUPERSEDED
Superseded by: GB/T 18375-2024 Prosthetics—Structural testing of lower-limb prostheses—Requirements and test methods
Superseded on: 2025-03-01
Title in English: Prosthetics - Structural testing of lower-limb prostheses - Part 4: Loading parameters of principal structural tests
Title in Chinese: 假肢 下肢假肢的结构检验 第4部分:主结构检验中的加载参数
Language: English
File Format: Electronic (PDF)
Delivery: Via email within 1~3 business days
Issued on: 2001-05-02
Implemented on: 2001-12-01
Professional Classification: GB-National Standard
Related Keywords: lower-limb prostheses
limb prostheses
principal structural tests
prostheses
structural testing
Related Topics: Inspection Center
Detection of phase structure
mechanical prosthesis
Prosthetics
mechanical prosthesis
load test load
Pseudo-caking
What does physical and chemical testing mainly test
GBT18375.4
GB/T 18375.4-2001
load
Transducer structural parameters
Detector structure EDX AES
double helix structure hypothesis

《GB/T 18375.4-2001假肢 下肢假肢的结构检验 第4部分:主结构检验中的加载参数》由TC148(全国残疾人康复和专用设备标准化技术委员会)归口,主管部门为民政部。
GB/T 18375描述了下肢假肢的静态和动态试验过程。在这个过程中,除了特殊情况,都是用一个试验力产生复合的试验载荷。在试验样品上的复合载荷取决于载荷各个分力的峰值,这些峰值通常发生在行走过程中支撑相时的不同瞬间。GB/T 18375描述的检验方法适用于小腿(BK)假肢、膝离断假肢和大腿(AK)假肢。GB/T 18375的本部分规定了:对于符合GB/T 18375.3-2001的4.3.2和4.4条的不同试验加载条件和载荷等级情况下:对试验样品进行安装、对线调整和加载时的偏移量数值;用于静态和动态试验的试验力的数值。


Scope

GB/T 18375 describes the static and dynamic test procedures for lower limb prostheses. In this process, except for special cases, a test force is used to generate a composite test load. The compound load on the test specimen depends on the peak values of the individual components of the load, which usually occur at different instants during the stance phase during walking. The test methods described in GB/T 18375 are applicable to lower leg (BK) prostheses, knee amputated prostheses and thigh (AK) prostheses.

Sample only — not a preview of GB/T 18375.4-2001
Page: 1 / 0
100%

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend