GB/T 18496.2-2005 in English

《GB/T 18496.2-2005电子设备用机电开关 第4-1部分:钮子（倒扳）开关 空白详细规范》由TC67（全国电器附件标准化技术委员会）归口，主管部门为中国电器工业协会
本部分等同采用IEC 61020-4-1:1991《电子设备用机电开开 第4部分阶 钮子(倒扳)开关 第1节：空白详细规范》，需与GB/T 9536-1995《电子设备用机电开关 第1部分：总规范》(idt IEC 61020-1:1991)和GB/T 18496-2001《电子设备用机电开关 第4部分：钮子(倒扳)开关分规范》(idt IEC 61020-4:1991)配合使用，并可作为电子件质量评定体系(IECQ)评定用标准。

Scope

blank detail specification is a supplementary document to a sectional specification, and specifies the requirements for the format, layout and minimum content of the detail specification. Detailed specifications that do not meet these requirements are not permitted and cannot be used as criteria for compliance with the requirements of the electronic component quality assessment system. The overall requirements of button (flip) switches shall comply with this detailed specification and GB/T 9536-1995 "Electromechanical Switches for Electronic Equipment Part 1: General Specification" and GB/T 18496-2001 "Electromechanical Switches for Electronic Equipment Part 4 Part: Button (Inverted) Switch" (idt IEC 61020-4-1: 1991) requirements. When formulating detailed specifications, the contents of 1.5 in GB/T 18496-2001 should be considered. The skeleton of the detailed specification is provided in the table below in this section, complete it by filling in the required content. The following content corresponding to the numbers in parentheses on the first page should be filled in the positions marked by numbers in the table below.