GB/T 19654-2005 in English
VALIDAuxiliaries for lamps - D.C.or A.C.supplied electronic step-down convertors for filament lamps - Performance requirements
- Issued on:2005-01-18
- Implemented on:2005-08-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$146.00
《GB/T 19654-2005灯用附件 钨丝灯用直流/交流电子降压转换器 性能要求》由TC224(全国照明电器标准化技术委员会)归口,TC224SC1(全国照明电器标准化技术委员会电光源及其附件分会)执行,主管部门为中国轻工业联合会
本标准规定了使用250V以下直流电源和50Hz或60Hz,1 000V以下交流电源,其工作频率不同于电源频率的电子降压转换器的性能要求,此种转换器应与IEC 30657所规定的卤钨灯及其他钨丝灯一起使用。
Scope
This standard specifies the performance requirements for an electronic step-down converter using a DC power supply below 250V and an AC power supply below 50Hz or 60Hz and 1000V, whose operating frequency is different from the power frequency. and other tungsten lamps. This standard should be used together with GB 19510.3.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 18489-2008 in English
Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements
2008-12-30 -

GB/T 14044-2008 in English
Ballasts for tubular fluorescent lamps—Performance requirements
2008-12-30 -

GB/T 15042-2008 in English
Auxiliaries for lamps—Ballasts for discharge lamps(excluding tubular fluorescent lamps)—Performance requirements
2008-12-30 -

GB/T 19656-2005 in English
DC supplied electronic ballasts for tubular fluorescent lamps-
2005-01-18