GB/T 19812.3-2008 in English
SUPERSEDEDplastic equipment for water saving irrigarion - Drip pipe and tape inlaid with emitters inside
- Issued on:2008-01-04
- Implemented on:2008-09-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$146.00
《GB/T 19812.3-2008塑料节水灌溉器材 内镶式滴灌管、带》由TC48（全国塑料制品标准化技术委员会）归口，主管部门为中国轻工业联合会。
ＧＢ／Ｔ１９８１２的本部分规定了内镶式滴灌管、带的术语和定义、分类、标记、
材料、要求、试验方法、检验规则和标志、包装、运输、贮存。本部分适用于输送温度不超过４５℃的灌溉水，并能适应滴灌用化肥和农药的内镶式非压力补偿滴灌管、带。本部分不适用于埋地使用的滴灌管、带。
Scope
This part of GB/T 19812 specifies the terms and definitions, classification, marking, materials, requirements, test methods, inspection rules and signs, packaging, transportation and storage of in-line drip irrigation pipes and belts (hereinafter referred to as drip irrigation pipes and belts). . This part is applicable to the irrigation water whose temperature does not exceed 45°C, and can be adapted to drip irrigation with non-pressure compensation drip irrigation pipes and belts.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 6671-2001 in English
Thermoplastics pipes - Determination of longitudinal reversion
1986-08-05 -
GB/T 15560-1995 in English
Standard test method for short - Time hydraulic failure and resistance to constant internal pressure of the plastics pipes for the transport of fluids
1995-05-02 -
GB/T 8802-2001 in English
Thermoplastics pipes and fitting - Determination of vicat softening temperature
1988-02-25 -
GB/T 18042-2000 in English
Thermoplastics pipes--Determination of creep ratio
2000-04-05 -
GB/T 14152-2001 in English
pipes - Determination of resistance to external blows - Round - The - Clock method
1993-02-01 -
GB/T 24456-2009 in English
High-density polyethylene silicore plastic duct
2009-10-15 -
GB/T 18474-2001 in English
Pipes and fittings made of crosslinked polythylene (PE-X) - Estimation of the degree of crossinking by determination of the gel content
2001-10-24
