GB/T 20234.2-2015 in English

《GB/T 20234.2-2015电动汽车传导充电用连接装置 第2部分：交流充电接口》由TC114（全国汽车标准化技术委员会）归口，TC114SC27（全国汽车标准化技术委员会电动车辆分会）执行，主管部门为工业和信息化部。
GB/T20234的本部分规定了电动汽车传导充电用交流充电接口的通用要求、功能定义、型式结构、参数和尺寸。
本部分适用于电动汽车传导充电用的交流充电接口,其额定电压不超过440V(AC),频率50Hz,额定电流不超过63A(AC)。
注:如果交流充电接口的供电接口使用了符合 GB2099.1和 GB1002的标准化插头插座,则本部分不适用于这些插头插座。

1 Scope

This part of GB/T 20234 specifies the general requirements, function definitions, type structures, parameters and dimensions of AC charging coupler for conductive charging of electric vehicles
This part is applicable to AC charging coupler for conductive charging of electric vehicles, of whichthe rated voltage shall not exceed 440V(AC), the frequency shall be 50Hz, and the rated current shall not exceed 63A(AC).
Note: If the plugs and socket-outlets of AC charging coupler adopt the standardized plugs and socket-outlets complying with GB 2099.1 and GB 1002, then this part is not applicable to these plugs and socket-outlets.

2Normative References

The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 18487.1 Electric Vehicle Conductive Charging System-Part 1: General Requirements
GB/T 20234.1 Connection Set for Conductive Charging of Electric Vehicles-Part 1: General Requirements

3Terminologies and Definitions

For the purposes of this document, the terminologies and definitions defined in GB/T 20234.1 apply.

4 General Requirements

Foreword I
1 Scope
2 Normative References
3 Terminologies and Definitions
4 General Requirements
5 Rated Values of AC Charging Coupler
6 Functions of Charging Coupler
7 Dimensions
Appendix A (Normative) Structure Dimensions of Charging Coupler
Appendix B (Informative) Examples for Installation Dimensions of Vehicle Inlet and Socket-outlet in Charging Mode
Appendix C (Normative) Spatial Size Requirements of Vehicle Connector and Plug in Charging Mode
Bibliography