GB/T 21187-2007 in English
VALIDAtomic absorption spectrophotometer
- Issued on:2007-09-12
- Implemented on:2008-05-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$175.00
《GB/T 21187-2007原子吸收分光光度计》由TC124(全国工业过程测量控制和自动化标准化技术委员会)归口,TC124SC6(全国工业过程测量控制和自动化标准化技术委员会分析仪器分会)执行,主管部门为中国机械工业联合会。
本标准规定了原子吸收分光光度计的要求、试验方法、检验规则和标志、包装、运输及贮存、质量保证。
Atomic absorption spectrophotometer
1 Scope
This standard specifies the requirements, test methods, inspection rules, marking, packaging, transportation and storage of atomic absorption spectrophotometer.
This standard is applicable to atomic absorption spectrophotometer with flame atomization and electrothermal atomization functions (hereinafter referred to as “the instrument”).
2 Normative references
The following documents contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 191-2000 Packaging — Pictorial marking for handling of goods (eqv ISO 780:1977)
GB/T 2829-2002 Sampling Procedures and Tables for Periodic Inspection by Attributes (Applicable to Inspection of Stability for Productive Process)
GB/T 15464-1995 General-purpose specification for the packaging of instrumentation products
JB/T 9329-1999 Basic environmental conditions and testing methods for instruments transportation and storage in the transportation
JB/T 9355-1999 Preparation method of calibration solution for the measurement of atomic absorption
3 Requirements
3.1 Normal working conditions
The working environment of the instrument shall meet the following requirements:
a) Ambient temperature: 15°C ~ 30°C;
b) Relative humidity: ≤ 75%;
c) No vibration or electromagnetic interference affecting the use of instruments;
Foreword I
1 Scope
2 Normative references
3 Requirements
4 Test method
5 Inspection rules
6 Marking, packaging, transportation and storage
7 Quality Assurance

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 25472-2010 in English
Quality inspection provisions for analyzers
2010-12-01 -

GB/T 11007-2008 in English
Test method of electrolytic conductivity analyzers
2008-06-30 -

GB/T 21186-2007 in English
Fourier transform infrared spectrometer
2007-09-12 -

GB/T 34065-2017 in English
Safety requirements for analyzers
2017-07-31 -

GB/T 13966-2013 in English
Terminology for Analytical Instruments
2013-12-17 -

GB/T 29813-2013 in English
Analyser systems―Guide to technical enquiry and bid evaluation
2013-11-12 -

GB/T 26793-2011 in English
Coulometry micro water teller
2011-07-29