GB/T 22344-2018 in English
VALIDPolyester strapping for packaging
- Issued on:2018-03-15
- Implemented on:2018-10-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$156.00
| Standard No: | GB/T 22344-2018 |
| Document status: | VALID |
| Title in English: | Polyester strapping for packaging |
| Title in Chinese: | 包装用聚酯捆扎带 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2018-03-15 |
| Implemented on: | 2018-10-01 |
| Superseding: |
GB/T 22344-2008 Polyester strapping for packaging
|
| ICS Classification: | 55.040-Packaging materials and accessories |
| Chinese Classification: | A82-Packaging material and container |
| Professional Classification: | GB-National Standard |
| Related Keywords: | classification dimension category code technical requirements purpose machine
automated machinery belt polyester smooth belt specification code nominal width |
| Related Topics: | GB T22344 2008
GB/T 22344-2018 gb/t22344 GB 22344 GB/t+22344 wire bundling GBT22344 GB/T 22344-2008 GB/T 22344-2018 polyester strapping Strapping Label cable ties Automotive cable ties Use of tie ties Strapping machine industry |
《GB/T 22344-2018包装用聚酯捆扎带》由TC49（全国包装标准化技术委员会）归口，主管部门为国家标准化管理委员会。
Introduction
GB/T 22344—2018 Standard Overview
This standard replaces the previous GB/T 22344—2008. The main updates include the addition of the classification of embossed strapping tapes, the standardization of terms and test methods, and the addition of new inspection rules.
1. Scope of the standard
Applicable to polyester strapping tapes for packaging produced with polyester (PET) as the main raw material, and specifies the terms, classification, technical requirements and test methods.
2. Classification and marking
The products are divided into machine strapping tapes (J) and hand tool strapping tapes (S) according to their use, and are divided into Grade I and Grade II according to the tensile breaking stress. The surface features are divided into embossed belt (Y) and smooth belt (G), and the specific classification is as follows:
| Classification dimension | Category | Code | Technical requirements |
|---|---|---|---|
| Purpose | Machine belt | J | Suitable for automated machinery |
| Belt for hand tools | S | Suitable for manual operation |
3. Technical requirements
Key indicators: Tensile breaking stress, breaking strain and minimum load.
For specifications, please refer to the table below. The allowable deviation of width is ±0.8mm, and the allowable deviation of thickness is ±0.06mm:
| Specification code | Nominal width (mm) | Nominal thickness (mm) | Minimum tensile load at break (N) |
|---|---|---|---|
| 090060 | 9.0 | 0.60 | 2110 (Grade I) / 1890 (Grade II) |
| 160080 | 16.0 | 0.80 | 5000 (Grade I) / 4480 (Grade II) |
4. Mechanical properties test method
The test needs to be carried out under standard conditions, with a tensile speed of 100±10mm/min. The sample cut length is determined according to the gauge length, and the breaking load reading is rounded to ten digits.
5. Inspection rules
Sampling plan:Each batch of products shall be sampled and inspected in accordance with GB/T 2828.1, and the sample size shall be determined according to the batch size.
Actual case analysis
For example, a batch of 500 rolls of products needs to be randomly selected for inspection with 8 rolls. If the number of unqualified products in appearance exceeds the acceptance number, the entire batch shall be deemed unqualified.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 35773-2017 in English
Assessment for odor of packaging materials and products
2017-12-29 -
GB/T 15718-2008 in English
Foam-in-place packaging materials
2008-07-18 -
GB/T 18706-2025 in English
Paper based laminated material for fresh-keeping packaging of liquid food
2025-06-30 -
GB/T 8167-2008 in English
Testing method of dynamic compression for packaging cushioning materials
2008-07-18
