GB/T 22418-2008 in English

《GB/T 22418-2008工业车辆 车辆自动功能的附加要求》由TC332（全国工业车辆标准化技术委员会）归口，主管部门为中国机械工业联合会。
本标准等同采用ISO 24134:2006《工业车辆　车辆自动功能的附加要求》（英文版）。
本标准规定了工业车辆下列自动功能控制装置和控制系统的安全要求：
――转向（直接的机械式导向除外）；
――运行；
――起升和下降；
――载荷操纵、例如旋转、前移、摆动、倾斜、夹紧；
――以上动作的组织和/或排序。
本标准应与ISO 3691各适用部分配合使用。
在ISO 3691各适用部分的范围一章中的限制内容也适用于本标准。
本标准不适用于下列情况，并且不包含下述情况的要求：
――用来限制驾驶员操作的安全装置（例如高度限位器，速度限制器）；
――用恶劣的条件下操作（例如极端的气候、冷藏车、强磁场）；
――在符合特殊标准的环境中工作（例如潜在的爆炸性环境）；
――电磁兼容性；
――旅客输送；
――搬运载荷时，该载荷的性质可能导致危险情况发生（例如熔融金属、酸/碱、辐射材料）。

1 Scope
This National Standard specifies the safety requirements for automated function controls and control systems for the following automated functions of industrial trucks (hereinafter referred to as "truck"):
-Steering (excluding direct mechanical guidance);
-Travel;
-Lifting and lowering operations;
-Load manipulations, e.g. rotation, reach, slewing, tilting, clamping;
-Combination and/or sequence of the above movements
Note: The control system is generally part of the truck but can include components external to the truck, e.g. the means of guidance for automated steering.
This National Standard is intended for use in conjunction with one or more of the applicable parts of ISO 3691.
Limitations in the scopes of the applicable parts of ISO 3691 also apply to this National Standard.
This National Standard is not applicable to, and does not include, requirements for the following:
-Safety equipment (e.g. devices for height limitation, speed limitation) used to override operator control;
-Operation in severe conditions (e.g. extreme climates, freezer applications, strong magnetic fields);
-Operation in environments subject to special rules (e.g. potentially explosive atmospheres);
-Electromagnetic compatibility;
-Transportation of passengers;
-Handling of loads, the nature of which could lead to dangerous situations (e.g. molten metals, acids/bases, radiating materials).
2 Normative References
The following referenced documents are indispensable for the application of this document. For dated reference, subsequent amendments to (excluding correction to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to study whether the latest edition of this document is applicable. For undated references, the latest edition of the referenced document is applicable to these specifications.
GB/T 15706.2-2007 Safety of machinery-Basic concepts, general principles for design Part 2: Technical principles and specifications (ISO 12100-2:2003, IDT)
GB/T 16855.1-2008 Safety of machinery-Safety-related parts of control systems-Part 1: General principles for design (ISO 13849-1: 2006, IDT)
ISO 3691-1 Industrial trucks-Safety requirements and verification-Part 1: Self-propelled industrial trucks, other than driverless, variable-reach trucks and burden-carrier trucks1)
ISO 3691-2 Industrial trucks-Safety requirements and verification-Part 2: Self-propelled1)
ISO 3691-3 Industrial trucks-Safety requirements and verification-Part 3: Additional requirements for trucks with elevating operator position and trucks specifically designed to travel with elevated loads1)
ISO 3691-4 Industrial trucks-Safety requirements and verification-Part 4: Driverless industrial trucks and their systems1)
ISO 3691-5 Industrial trucks-Safety requirements and verification-Part 5: Pedestrian-propelled trucks1)
ISO 3691-6 Industrial trucks-Safety requirements and verification-Part 6: Burden and personnel carriers1)
ISO 20898 Industrial trucks-Electrical requirements2)
3 Terms and Definitions
For the purposes of this document, the following terms and definitions apply.
3.1 Automated function
Movement for transport or positioning of the truck and/or load initiated by the operator but not requiring continued action by the operator.
3.2 Automated lifting and lowering
Automated function that controls intended vertical movements and/or positioning of the load-carrying device to a preselected height.
3.3 Automated load manipulation
Automated function that controls load movements (e.g. rotation, reach, slewing, tilting, telescoping, clamping).
3.4 Automated steering
Automated function that takes control of the steering and keeps the truck on a predetermined path.
Note: Automated steering excludes any direct mechanical guidance (e.g. by means of a rail) and manually controlled steering systems equipped with feedback signal(s) for regulating the steering system.
3.5 Automated steering acquisition
System condition when automated steering has been selected but the operator is still positioning the truck to acquire the guidance means, i.e. the operator still has control of the manual truck steering system.
3.6 Automated travel
Automated function that takes control of the speed and direction of travel and/or positioning of the truck.
3.7 Sequenced automated functions
Succession of automated functions in which each movement can commence only after the completion of the previous movement.
3.8 Combined automated control
Automated system that takes control of two or more automated functions simultaneously.
3.9 Responsible person
Designated person suitably trained and qualified by knowledge and practical experience and in possession of the necessary instructions to enable the assigned task to be carried out.

Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 List of hazards
5 Safety Requirements
6 Verification and Commissioning
7 Information for Use