GB/T 22793.2-2008 in English

《GB/T 22793.2-2008家具 儿童高椅 第2部分：试验方法》由607（中国轻工业联合会）归口，主管部门为中国轻工业联合会。
ＧＢ２２７９３的本部分规定了评定ＧＢ２２７９３．１―２００８《家具　儿童高椅　第１部分：安全要求》中家用儿童高椅和多功能椅的安全性要求的试验方法。
本部分不适用于可变换成矮椅，矮椅和矮桌以及具有婴儿学步架、推椅、摇椅、汽车椅和可躺的低椅等高椅的附加功能。
本部分描述了高椅不同部分在模拟正常使用及可预见合理性误用时的一系列加载试验。这些试验的设计是为了评价产品的性能，并不考虑材料、设计／结构或制造工艺。
本试验的设计适用于已装配完毕并准备投入使用的产品。
试验结果仅对受试样品有效。当试验结果拟用于其他类似产品，试样应具有该类产品的代表性。
如果试件的设计结构不适合于本标准的试验程序，则试验应尽可能按照本标准规定的程序进行，并列表指出与规定程序的差异。

1 Scope

This Part of GB 22793 specifies test methods that assess the safety requirements given in GB 22793.1 “Furniture – Children’s High Chair - Part 1: Safety Requirements” of children’s high chairs and multi-purpose chairs for domestic use.
This Part is not applicable to such chairs may be convertible to low chairs, low chairs and tables and for such uses as baby walking frames, pushchairs, Swings, car chairs or reclining low chairs.
This Part describes a number of tests consisting of the application, to various Parts of the item, of forces simulating normal functional use, as well as misuse, that tan reasonably be expected to occur.
The tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes.
The tests are designed to be applied to a high chair that is fully assembled and ready for use.
The test results are only valid for the article tested. When the test results are intended to be applied to other similar articles, the test specimen should be representative of the production model.
In the case of designs not catered for in the test procedures, the test should be carried out as far as possible as described, and a list made of the deviations from the test procedure.

2 Normative References

The following Standards contain provisions which, through reference in this text, constitute provisions of this Part of GB 22793. For dated references, subsequent amendments to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Part are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.

Foreword II
1 Scope
2 Normative References
3 General Test Requirements
4 Test Equipment
5 Test Procedures
6 Test Report
Appendix A (Normative) Appearance Test Method