GB/T 2363-1990 in English
SUPERSEDEDAccuracy of fine - Pitch involute cylindrical gears
- Issued on:1990-09-08
- Implemented on:1991-10-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$408.00
本标准规定了小模数渐开线圆柱齿轮的误差定义、代号、精度等级、齿坯要求、公差与检验、侧隙及图标标注等。
Scope
This standard specifies the error definition, code, accuracy grade, tooth blank requirements, tolerance and inspection, backlash and drawing marking of small modulus involute cylindrical gears (hereinafter referred to as gears). This standard applies to involute cylindrical gears with normal modulus mn<1.0mm, basic tooth profile according to GB2362, and pitch circle diameter d≤400mm.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 30819-2024 in English
Harmonic drive gear reducers for robot
2024-09-29 -
GB/T 10062.1-2003 in English
Calculation of load capacity of bevel gear - Part 1: Introduction and general influence factors
2004-06-01 -
GB/T 3374.1-2010 in English
Vocabulary of gear terms—Part 1:Definitions related to geometry
2010-08-09 -
GB/T 15752-1995 in English
Terminology of circular-arc gear
1995-01-01 -
GB/T 19936.1-2005 in English
Gears. FZG test procedures. Part 1: FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils
2005-09-19 -
GB/T 39332-2020 in English
General requirements for the anti-fatigue manufacturing of precision gears
2020-11-19 -
GB/T 2362-1990 in English
Basic rack tooth profile of fine - Pitch involute cylindrical gears
1990-09-08 -
GB/Z 10096-2022 in English
Accuracy of rack
2022-10-14 -
GB/T 8542-2023 in English
High speed gear units technical specifications
2023-09-07
