Sign In |Help & Support
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)
column delineator general column delineator elastic column delineator attached delineator rectangular delineator chromate pigments fertilizers dumas combustion method introduction interpretation telephone models
GB/T 24970-2010 in English

GB/T 24970-2010 in English

SUPERSEDED

Delineator

  • Issued on:2010-08-09
  • Implemented on:2010-12-01
  • File Format:PDF
  • Delivery:Via email within 1~3 business days
Price(USD): $250.00
$243.00

《GB/T 24970-2010轮廓标》由TC223(全国交通工程设施(公路)标准化技术委员会)归口,主管部门为国家标准化管理委员会。


3 Terms and Definitions

For the purposes of this standard, the following terms and definitions apply.

3.1

delineator

traffic safety facilities which are set along both sides of road, used for indicating road heading direction and boundary and possess retroreflective performance

4 Product Classification

Delineator may be classified into column delineator embedded in ground and attached delineator attached to structures by arrangement conditions, into column delineator, trapezoid delineator, round delineator and rectangular delineator by shape and into white delineator and yellow delineator by color. Column delineator may be further classified into general column delineator and elastic column delineator by the characteristic of column materials.

5 Product Structure

5.1 Column delineator

5.1.1 Column delineator consists of column and retroreflective material.

5.1.2 See Figure 1 for the dimension and allowable tolerance of general column delineator; the cross section of column is hollow rounded isosceles triangle with height of 120 mm, bottom edge length of 100mm and top surface inclining to traffic lane. The column shaft is white, with 250mm long black marks around its upper part; there shall be a 180 mm× 40 mm rectangular retroreflective materials, such as reflector or reflection film, embedded in the center of the black marks; retroreflective materials and black marks shall be firmly connected to the column of the delineator and not prone to peeling.

Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Product Classification
5 Product Structure
6 Technical Requirements
7 Test Method
8 Inspection Rules
9 Marking, Packaging, Transport and Storage

Page: 1 / 0
100%

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend