contour calibration

contour calibration, Total:140 items.

The international standard classification for "contour calibration" includes: Road equipment and installations , Transmissions, suspensions , Tyres in general , Road vehicle tyres .

The Chinese standard classification for "contour calibration" includes: Highway engineering , Tyre .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 9769-2015 Rim contour measure
GB/T 24970-2010 Delineator
GB/T 24970-2020 Delineator
GB/T 9769-2005 Rim contour measure
GB/T 9769-1988 Rim contour inspection

Professional Standard - Traffic

JT/T 388-1999 Specification for delineators

Taiwan Provincial Standard of the People's Republic of China

CNS 4679-1986 Contours of Rims for Automobiles
CNS 9683-1984 Interchangeable Perforated Tape Variable Block Format for Positioning, Contouring and Contouring/Positioning Numerically Controlled Machines

National Metrological Verification Regulations of the People's Republic of China

JJG(石油) 36-1994 Thread Profiler

Professional Standard - Automobile

QC/T 581-1999 Automobile rim - Profile inspection template

Group Standards of the People's Republic of China

T/CISA 063-2020 Metallic materials—Determination of residual stress—Contour method

KR-KS

KS C IEC 61126-2003(2023) Lamp outline annotation process
KS M ISO 5751-3-2021 Motorcycle tyres and rims(metric series)—Part 3: Range of approved rim contours
KS I ISO 226-2020 Acoustics — Normal equal-loudness-level contour

Korean Agency for Technology and Standards (KATS)

KS T 3805-2022 Retroreflector for road delineator
KS B 5609-2001 Profile projectors
KS T 3805-2017 Retroreflector for road delineator
KS B 4221-2004 PUNCHED TAPE VARIABLE BLOCK FORMAT FOR CONTOURING AND CONTOURING/POSITIONING NUMERICALLY CONTROLLED MACHINE TOOLS
KS B 7122-2001 Contours of rims for agricultural machines and implements
KS B 7122-1974 Contours of rims for agricultural machines and implements
KS R 4014-2019 Contours of Rims for Automobiles
KS B 4221-1987 PUNCHED TAPE VARIABLE BLOCK FORMAT FOR CONTOURING AND CONTOURING/POSITIONING NUMERICALLY CONTROLLED MACHINE TOOLS
KS X ISO/IEC 11184-3-2002(2007) Information technology－International Standardized Profiles FVT1nn－Virtual Terminal Basic Class－Register of VTE-profiles－Part 3：FVT 114－A-mode Transparent VTE-Profile
KS X ISO/IEC 11187-3-2002(2007) Information technology－International standardized profiles AVT1n, AVT2n－virtual terminal basic class－Application profiles－Part 3：AVT22－S-mode forms application profile
KS M ISO 5751-3:2021 Motorcycle tyres and rims(metric series)—Part 3: Range of approved rim contours
KS I ISO 226:2020 Acoustics — Normal equal-loudness-level contour
KS P ISO 7193:2013 Wheelchairs－Maximum overall dimensions
KS R 4014-1991(2019) Contours of Rims for Automobiles
KS B 4221-1987(2002) PUNCHED TAPE VARIABLE BLOCK FORMAT FOR CONTOURING AND CONTOURING/POSITIONING NUMERICALLY CONTROLLED MACHINE TOOLS
KS P ISO 7193:2008 Wheelchairs-Maximum overall dimensions
KS B 5609-2001(2021) Profile projectors
KS B 5609-2021 Profile projectors
KS B 5609-2001(2016) Profile projectors
KS B 5609-1982 Profile projectors
KS X ISO/IEC 10000-2-2003(2008) Information technology－Framework and taxonomy of International Standardized Profiles－Part 2：Principles and Taxonomy for OSI Profiles
KS B ISO 10828:2007 Worm geras－Geometry of worm profiles

International Organization for Standardization (ISO)

ISO 1880:1979 Instruments for the measurement of surface roughness by the profile method; Contact (stylus) instruments of progressive profile transformation; Profile recording instruments
ISO 1880:1974 Title missing - Legacy paper document
ISO 3274:1975 Instruments for the measurement of surface roughness by the profile method; Contact (stylus) instruments of consecutive profile transformation; Contact profile meters, system M
ISO/IEC ISP 11187-6:1996 Information technology - International standardized profiles AVT1n, AVT2n - Virtual terminal basic class - Application profiles - Part 6: AVT15; A-mode transparent application profile
ISO/IEC ISP 11187-3:1996 Information technology - International standardized profiles AVT1n, AVT2n - Virtual terminal basic class - Application profiles - Part 3: AVT22; S-mode forms application profile
ISO 2901:2016 ISO metric trapezoidal screw threads - Basic and design profiles
ISO/IEC ISP 11187-5:1996 Information technology - International standardized profiles AVT1n, AVT2n - Virtual terminal basic class - Application profiles - Part 5: AVT16 - A-mode generalized telnet application profile
ISO/IEC ISP 11187-4:1996 Information technology - International standardized profiles AVT1n, AVT2n - Virtual terminal basic class - Application profiles - Part 4: AVT23 - S-mode paged application profile
ISO 7193:1985 Wheelchairs; Maximum overall dimensions
ISO 13473-1:2019 Characterization of pavement texture by use of surface profiles — Part 1: Determination of mean profile depth
ISO/IEC ISP 11184-3:1996 Information technology - International standardized profiles FVT1nn - Virtual terminal basic class - Register of VTE-profiles - Part 3: FVT114 - A-mode transparent VTE-profile
ISO/IEC ISP 11184-2:1996 Information technology - International standardized profiles FVT1nn - Virtual terminal basic class - Register of VTE-profiles - Part 2: FVT115 - A-mode generalized telnet VTE-profile
ISO/IEC TR 10000-2:1992 Information technology — Framework and taxonomy of International Standardized Profiles — Part 2: Taxonomy of OSI Profiles
ISO 2901:1993 ISO metric trapezoidal screw threads; Basic profile and maximum material profiles
ISO 2901:1977 ISO metric trapezoidal screw threads — Basic profile and maximum material profiles
ISO/TR 10828:2015 Worm gears - Worm profiles and gear mesh geometry
ISO/IEC ISP 11184-1:1995 Information technology - International standardized profiles FVT1nn - Virtual terminal basic class - Register of VTE-profiles - Part 1: FVT121, FVT122 - S-mode forms and paged VTE-profiles
ISO/IEC ISP 12059-0:1995 Information technology - International Standardized Profiles - OSI Management - Common information for management functions - Part 0: Common definitions for management function profiles
ISO/TR 10828:1997 Worms gears - Geometry of worm profiles

Spanish Association for Standardization (UNE)

UNE 135363:1998 VERTICAL SIGNS. ROAD DELINEATORS. FIXED CYLINDRICAL ROAD DELINEATORS IN PLASTIC MATERIAL. CHARACTERISTICS AND TEST METHODS.
UNE-EN ISO 13473-1:2020 Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:2019)
UNE 25 020 Rims with profile and section details
UNE 21-822-1985 Low voltage industrial equipment. Support outline. Width 35 mm Symmetrical profile for device fixation with quick fixing system
UNE 16-257-1985 Milling machine with fixed contour shape. convex semicircle
UNE 21-823-1985 Low voltage industrial equipment. Support outline. Width 75 mm Symmetrical profile for device fixation with quick fixing system

AGMA - American Gear Manufacturers Association

05FTM14-2005 Determining the Shaper Cut Helical Gear Fillet Profile
09FTM03-2009 Producing Profile and Lead Modifications in Threaded Wheel and Profile Grinding
01FTMS1-2001 Optical Technique for Gear Contouring

SCC

NS 1073-1:1970 Metric screw threads — ISO profile — Basic profile
NS 1870:1971 Unified screw threads — Basic profile, ISO-profile
AASHTO M 328-2014(2022) Standard Specification for Inertial Profiler
DANSK DS/ISO 13473-1:2019 Characterization of pavement texture by use of surface profiles – Part 1: Determination of mean profile depth
DANSK DS/ISO 2901:2016 ISO metric trapezoidal screw threads – Basic and design profiles
NS 5700:1978 ISO metric trapezoidal screw threads — Basic profile and maximum material — Profiles
IEC 60368-3:1979 Piezoelectric filters - Part 3: Standard outlines
DIN 20600 Supplement 1:1991 Mine railways; wheel profils for locomotives and cars; example of simple track point for the wheel profile B
AENOR UNE 25020:1950 PROFILE OF THE WHEEL RIMS BELT AND DETAIL OF THE CUT

German Institute for Standardization

DIN 7844:1984-09 Rim profile gauges for rims to DIN 7827
DIN 7830:1983-01 Profile gauges for rims to DIN 7816
DIN EN ISO 13473-1:2021-11 Characterization of pavement texture by use of surface profiles - Part 1: Determination of mean profile depth (ISO 13473-1:2019, Corrected version 2021-06); German version EN ISO 13473-1:2019
DIN 7841:1987-05 Profile gauges for rims to DIN 7825

Danish Standards Foundation

DS/ISO 1880:1981 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of progressive profile transformation. Profile recording instruments
DS/ISO 3274:1981 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of consecutive profile transformation. Contact profile meters, system M
DS/EN ISO 13473-1:2004 Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth

The American Road & Transportation Builders Association

AASHTO M 328-2014 Standard Specification for Inertial Profiler
AASHTO M 328-14(R2022) Standard Specification for Inertial Profiler

U.S. Military Regulations and Norms

ARMY MIL-T-45919 NOTICE 1-1996 TARGETS, SILHOUETTE, STANDING MAN HOLDING PISTOL AND 1000 INCH
ARMY MIL-T-45919-1968 TARGETS, SILHOUETTE, STANDING MAN HOLDING PISTOL AND 1000 INCH

TR-TSE

TS 930-1976 INSTRUMENTS FOR THE MEASUREMENT OF SURFACE BY THE POFILE METHOD CONTACT (STYLUS) INSTRUMENTS OF PROGRESSIVE PROF?LE TRANSFORMATION PROF?LE RECORDING INSTRUMENTS

AASHTO - American Association of State Highway and Transportation Officials

M 328-2014 Standard Specification for Inertial Profiler

British Standards Institution (BSI)

BS EN ISO 13473-1:2019 Characterization of pavement texture by use of surface profiles - Determination of mean profile depth
BS EN 61784-1:2008 Industrial communication networks - Profiles -Part 1: Fieldbus profiles
BS EN 61784-3:2008 Industrial communication networks. Profiles. Functional safety fieldbuses. General rules and profile definitions
BS EN ISO 13473-1:2019(2021) Characterization of pavement texture by use of surface profiles Part 1 : Determination of mean profile depth
BS ISO 2901:2016(2020) ISO metric trapezoidal screw threads — Basic and design profiles
BS AU 50-4.5.1:1995(1999) Tyres and wheels — Part 4 : Rim profiles and dimensions — Section 5 : Industrial vehicle rims — Subsection 5.1 Specification for rim profiles and dimensions for code - designated series tyres
BS EN ISO 19106:2006 Geographic information - Profiles
DD ISO/TS 13473-4:2008 Characterization of pavement texture by use of surface profiles. Spectral analysis of texture profiles
BS PD ISO/TR 10828:2015 Worm gears. Worm profiles and gear mesh geometry

AIA/NAS - Aerospace Industries Association of America Inc.

NAS968-1974 Interchangeable Digital Magnetic Tape Standards@ Variable Block@ Word Address Format@ Contouring and Contouring/Positioning Equipment (Rev 1)

VDI - Verein Deutscher Ingenieure

VDI/VDE 2629 Blatt 2-2008 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces
VDI/VDE 2629 BLATT 2-2019 Accuracy of contour-measuring systems - Characteristics and their testing - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces

SAE - SAE International

SAE RS-274D-2015 INTERCHANGEABLE VARIABLE BLOCK DATA FORMAT FOR POSITIONING@ CONTOURING@ AND CONTOURING/POSITIONING@ NUMERICALLY CONTROLLED MACHINES (Formerly TechAmerica RS-274-D)

Association of German Mechanical Engineers

VDI/VDE 2629 Blatt 2-2012 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces

American Society for Testing and Materials (ASTM)

ASTM E2955-13(2019) Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces
ASTM E2560-07 Standard Specification for Data Format for Pavement Profile
ASTM E2560-13 Standard Specification for Data Format for Pavement Profile

YU-JUS

JUS M.B0.010-1988 Metrlc scretf threads rrith triangular ISO-profile. Basic profile
JUS M.A1.034-1980 Instruments for the measurement of surface roughness by tne profil method-contact (stylus) instrument* of profile transformation - Profile reoording instruments

Society of Automotive Engineers (SAE)

SAE RS-274D-2016 INTERCHANGEABLE VARIABLE BLOCK DATA FORMAT FOR POSITIONING, CONTOURING, AND CONTOURING/POSITIONING, NUMERICALLY CONTROLLED MACHINES

Aerospace Industries Association

AIA NAS 968-1974 (Inactive)Interchangeable Digital Magnetic Tape Standards, Variable Block, Word Address Format, Contouring and Contouring/Positioning Equipment (Rev. 1)

HU-MSZT

MSZ 2531-1971 V-belt dial general outline

American Gear Manufacturers Association

AGMA 05FTM14-2005 Determining the Shaper Cut Helical Gear Fillet Profile

ECIA - Electronic Components Industry Association

417-A-1991 Crystal Outlines
TEP29-1963 Hard Glass Bulb Criteria and Bulb Outlines

ZA-SANS

VC 8078-2003 Compulsory specification for material for contour marking on motor vehicles

GSO

GSO ISO 13473-1:2014 Characterization of pavement texture by use of surface profiles -- Part 1: Determination of Mean Profile Depth
OS GSO ISO 13473-1:2014 Characterization of pavement texture by use of surface profiles -- Part 1: Determination of Mean Profile Depth

Association Francaise de Normalisation

NF EN 17271:2019 Plastics - Profiles based on poly(vinyl chloride) (PVC) - Determination of the peel resistance of profiles with laminated films
NF S31-252-1*NF EN ISO 13473-1:2019 Characterization of pavement texture by use of surface profiles - Part 1 : determination of mean profile depth
NF EN 12899-3:2008 Fixed vertical road signs - Part 3: delineators and retroreflectors
NF EN ISO 13473-1:2019 Characterization of the texture of a road surface based on surface profile readings - Part 1: determination of the average depth of the profile
NF Z74-261:2009 Protection profile - Time stamping system
NF Z84-474-2*NF EN 300474-2:2004 Digital Enhanced Cordless Telecommunications (DECT) - Generic Access Profile (GAP) - Profile requirement list and profile specific Implementation Conformance Statement (ICS) proforma - Part 2 : Fixed radio Termination (FT) (V1.2.1).
FD E23-003-2016 Worm gears - Worm profiles and gear mesh geometry

Aeronautical Radio Inc.

ARINC 636 ITEM 4.0-1993 Physical (PHY) Layer Profile

Japanese Industrial Standards Committee (JISC)

JIS B 7184:1999 Profile projectors
JIS D 4218:2021 Automobile parts -- Wheels -- Contours of rims
JIS B 7184:2021 Profile projectors
JIS D 4218:1999 Automobile parts -- Wheels -- Contours of rims

CZ-CSN

CSN 28 0337-1994 Contour lines of tramcars
CSN 01 3142-1982 Indication of profiled material
CSN 28 0322-1955 Vehicle outline. Overview
CSN ISO 1880:1993 Instruments for the measurement of surface roughness by the profile method. Contact (stylus) instruments of progressive profile transformation. Profile recording instruments

SE-SIS

SIS STS-2-1932 Tool profiles, conical grooves and conical double wood grooves (VSTG and VSDTG profiles)
SIS SMS 2065 E-1974 Motorkedjes?gar. Kedjehjul. Tandprofiler

RO-ASRO

STAS 12309-1985 PRINTING PAPERS AND BOARDS Surface microcontour determination

Canadian Standards Association (CSA)

CSA ISO/IEC ISP 11187-6-00:2000 Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part 6: AVT15 - A-Mode Transparent Application Profile ISO/IEC ISP 11187-6: 1996
CSA ISO/IEC ISP 11187-5-00:2000 Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part 5: AVT16 - A-Mode Generalized Telnet Application Profile ISO/IEC ISP 11187-5: 1996
CSA ISO/IEC ISP 11187-4-00:2000 Information Technology - International Standardized Profiles AVT1n, AVT2n - Virtual Terminal Basic Class - Application Profiles - Part 4: AVT23 - S-Mode Paged Application Profile ISO/IEC ISP 11187-4: 1996

Standard Association of Australia （SAA）

AS 7507:2017 Rolling Stock Outlines

International Telecommunication Union (ITU)

ITU-T T.86-1998 Information Technology - Digital Compression and Coding of Continuous-Tone Still Images: Registration of JPEG Profiles SPIFF Profiles SPIFF Tags SPIFF Colour Spaces APPn Markers SPIFF Compression Types and Registration Authorities (REGAUT) - Series T: Ter

Lithuanian Standards Office

LST EN ISO 13473-1:2004 Characterization of pavement texture by use of surface profiles - Part 1: Determination of Mean Profile Depth (ISO 13473-1:1997)

Military Standards (MIL-STD)

DOD MIL-STD-188-176 CHG NOTICE 1-1997 STANDARDIZED PROFILE FOR ASYNCHRONOUS TRANSFER MODE (ATM)