GB/T 3106-1982 in English
SUPERSEDEDBolts,screws and studs; Nominal lengths and thread lengths for general purpose bolts
- Issued on:1982-05-22
- Implemented on:1983-07-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$175.00
《GB/T 3106-1982螺栓、螺钉和螺柱的公称长度和普通螺栓的螺纹长度》由TC85（全国紧固件标准化技术委员会）归口，主管部门为中国机械工业联合会。
Scope
This standard is basically consistent with the international standard ISO888-1976 "Bolts, screws and studs - Nominal length and thread length of ordinary bolts". This standard specifies the nominal lengths of bolts, screws and studs, as well as the thread lengths of common bolts, and is applicable to both standard and non-standard fasteners.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 9074.10-1988 in English
Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
1988-04-16 -
GB/T 3098.10-1993 in English
Mechanical properties of fasteners - Bolts, scrows, studs and nuts made of non-ferrous metals
1993-07-28 -
GB/T 5278-1985 in English
Fasteners; Split pin holes and wire holes
1985-08-01 -
GB/T 13682-1992 in English
load fatigue testing for threaded fasteners
1992-09-22
