GB/T 32483.2-2021 in English

《GB/T 32483.2-2021灯控制装置的效率要求 第2部分:高压放电灯（荧光灯除外） 控制装置效率的测量方法》由TC224（全国照明电器标准化技术委员会）归口，TC224SC1（全国照明电器标准化技术委员会电光源及其附件分会）执行，主管部门为中国轻工业联合会。

Energy performance of lamp controlgear
- Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) -
Method of measurement to determine the efficiency of controlgear

1 Scope

This document defines a measurement method of the power losses of electromagnetic controlgear, the total input power and the standby power of electronic controlgear for high intensity discharged lamps (excluding fluorescent lamps). A calculation method of the efficiency of controlgear for high intensity discharged lamp(s) is also defined.

It is assumed that the controlgear are designed for use on DC supplies up to 1,000 V and/or AC supplies up to 1,000 V at 50 Hz or 60 Hz.

Note: Requirements for testing individual controlgear during production are not included.

This document specifies the measurement method for the total input power, the standby power and the calculation method of the lamp controlgear efficiency for all controlgear sold for domestic and normal commercial purposes operating with high intensity discharge lamps.

This document does not apply to:

——controlgear which form an integral part of lamps;

——controlgear circuits with capacitors connected in series;

——controllable electromagnetic controlgear.


2 Normative references

The following documents contain requirements which, through reference in this text, constitute indispensable requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition (including any amendments) applies.

IEC 61347-1: 2015 Lamp controlgear - Part 1: General and safety requirements
IEC 61347-2-9 Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
IEC 61347-2-12 Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps)
IEC Guide 115: 2007 Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector)

3 Terms and definitions

For the purpose of this document, the following terms and definitions apply.

ISO and IEC maintain terminological databases for use in standardization at the following addresses:

IEC electrotechnical terminology: available at http: //www.electropedia.org/

ISO Online browsing platform: available at http://www.iso.org/obp

3.1
nominal value
suitable approximate quantity value used to designate or identify a component, device or equipment
[source: IEC 62442-1: 2018, 3.1]

3.2
rated value
quantity value for specified operating conditions of a component, device or equipment

Note: The value and conditions are specified in the relevant standard or assigned by the manufacturer or responsible vendor.

[Source: IEC 62442-1 : 2018, 3.3, modified — Note 2 has been deleted.]


3.3
controlgear
one or more components between the supply and one or more lamps which may serve to transform the supply voltage, limit the current of the lamp(s) to the required value, provide starting voltage and preheating current, prevent cold starting, correct power factor or reduce radio interference

[Source: IEC 62442-1: 2018, 3.4]

3.4
electromagnetic controlgear
magnetic controlgear
controlgear which, by means of inductance, or a combination of inductance and capacitance, serves mainly to limit the current of the lamp(s) to the required value and operates the lamp(s) at the same frequency as the supply frequency

[Source: IEC 62442-1: 2018, 3.5]

3.5
electronic controlgear
AC and/or DC supplied electronic circuit including stabilizing elements for starting and operating one or more lamp(s)

3.6
discharge lamp
lamp in which the light is produced, directly or indirectly, by an electric discharge through a gas, a metal vapour or a mixture of several gases and vapours

Foreword I
Introduction II
1 Scope
2 Normative references
3 Terms and definitions
4 General
5 Method of measurement of the input power and calculation of the efficiency of controlgear for high intensity discharge lamps
Bibliography