GB/T 33985-2017 in English
VALIDGuide on inclusion of safety aspects in electrotechnical product standards―Involving risk assessment aspects
- Issued on:2017-07-12
- Implemented on:2018-02-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$214.00
《GB/T 33985-2017电工产品标准中包括安全方面的导则 引入风险评估的因素》由TC25（全国电气安全标准化技术委员会）归口，主管部门为国家标准化管理委员会。
Introduction
GB/T 33985—2017 Standard Interpretation
1. Background and significance of standard formulation
GB/T 33985—2017 "Guidelines for the introduction of risk assessment factors in electrical product standards including safety aspects" aims to guide the standardization of electrical products and ensure that the comprehensive impact of risk factors is systematically considered in product standards.
Case study: The importance of standards
By analyzing actual product safety incidents, it can be found that ignoring risk assessment may lead to serious consequences. For example, failure to fully consider mechanical safety factors in power tools may cause equipment failure and personal injury.
2. Technical framework and comparison of standards
| Dimensions | GB/T 33985-2017 requirements | Comparison with international standards |
|---|---|---|
| Environmental conditions | Temperature range: -5℃ to +40℃, not exceeding 35℃ on average for 24 hours | Similar temperature and humidity control requirements as required by ISO/IEC Guide 51:2014 |
| Insulation level | Power frequency withstand voltage test voltage: 3750V (reinforced insulation) | Consistent with IEC 60204-1 standard |
| Mechanical safety | Enclosure protection level: IP54 and above | Higher than the EU EN 60950 standard |
3. Analysis of key technical points
Electromagnetic compatibility requirements
GB/T 33985-2017 places special emphasis on the requirements for electromagnetic compatibility (EMC), including the limits of conducted and radiated disturbances. For example, in the radio frequency electromagnetic field radiation immunity test, the product is required to withstand interference within the frequency range specified in GB/T 17626.3.
4. Implementation Recommendations and Best Practices
- Risk Management Process:Systematically identify and evaluate various risk factors during the product design phase.
- Standard Compatibility:Ensure that the formulated product standards are consistent with other relevant national and international standards.
- Testing and Verification:Carry out strict laboratory tests in accordance with standard requirements, including impulse voltage tests, temperature rise tests, etc.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB 26859-2011 in English
Safety code of electric power industry - Part of electric lines
2011-07-29 -
GB/T 13869-2017 in English
General guide for safety of electric user
2017-12-29 -
GB/Z 44938.1-2024 in English
Electrical safety of machinery—Part 1: Safety-related sensors used for the protection of persons
2024-12-31 -
GB/T 16842-2016 in English
Protection of persons and equipment by enclosures-Probe for verification
2016-02-24 -
GB/T 21654-2025 in English
GRAFCET specification language for sequential function charts
2025-10-31 -
GB/T 22696.1-2008 in English
Electrical equipment safety - Risk assessment and risk reduction - Part 1: General requirements
2008-12-31 -
GB/T 45827-2025 in English
Guidelines for risk assessment and reduction for collaborative safety system of low voltage electrical equipment
2025-05-30
