GB/T 34452-2017 in English

《GB/T 34452-2017可移式通用LED灯具性能要求》由TC224（全国照明电器标准化技术委员会）归口，TC224SC2（全国照明电器标准化技术委员会灯具分会）执行，主管部门为中国轻工业联合会。

ChinaStandards.net is in charge of this English translation. In case of any doubt about the English translation, the Chinese original shall be considered authoritative.

This standard is developed in accordance with the rules given in GB/T 1.1-2009

Attention is drawn to the possibility that some of the elements of this standard may be the subject of patent rights. The issuing body of this document shall not be held responsible for identifying any or all such patent rights.

This standard was proposed by China National Light Industry Council.

This standard is under the jurisdiction of Subcommittee 2 on Luminaire of National Technical Committee 224 on Lighting of Standardization Administration of China (SAC/TC 224 SC 2).


Performance Requirements of Portable LED Luminaires for General Lighting

1 Scope

This standard specifies the performance requirements of portable LED luminaires for general lighting (hereinafter referred to as luminaires).

This standard is applicable to the portable luminaires for general lighting with LED light source.

Luminaires are put into the following types:

Type A - luminaires with the LED modules indicated to be in accordance with IEC 62717;

Type B - luminaires with the LED modules not indicated to be in accordance with IEC 62717;

Type C - luminaires with LED light in accordance with GB/T 31897.1-2015.

The requirements of this standard only involves type test.

This standard does not involve Type C luminaires.

This standard involves neither LED luminaires generating only color light nor luminaires with only OLED (organic LED).

Unless the standard specifies alternative measurement methods or limits, these performance requirements are supplementary to Chapter 1 to Chapter 9 of GB/T 31897.1-2015.

2 Normative References

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB 7000.204 Luminaires - Part 2-4: Particular Requirements - Portable General Purpose Luminaires
GB/T 9473 Performance Requirements for Table Lamps for Paper Task
GB 17625.1 Electromagnetic Compatibility - Limits - Limits for Harmonic Current Emissions (Equipment Input Current≤16A per Phase)
GB/T 17743 Limits and Methods of Measurement of Radio Disturbance Characteristics of Electrical Lighting and Similar Equipment
GB/T 18595 Equipment for General Lighting Purposes - EMC Immunity Requirements
GB/T 31897.1-2015 Luminaire Performance - Part 1: General Requirements
GB/T 31897.201-2016 Luminaire Performance - Part 2-1: Particular Requirements for LED Luminaires
IEC 62717 LED modules for general lighting - Performance requirements

3 Terms and Definitions

For the purposes of this document, the terms and definitions given in GB 7000.204, GB/T 9473, GB/T 31897.1-2015 and GB/T 31897.201-2016 and the following apply.

3.1

portable LED luminaires

Luminaires that contain one or multiple LED light sources and can be moved from one place to another in normal service condition connected to power supply.

Notes:

1: wall-mounted luminaires with power lines connected to the plugs, which can be fixed to their supports with thumb screws, steel clips or hooks and easily removed from the supports by hand, are considered as portable luminaires.

2: portable LED luminaires for general lighting can be exemplified as table lamps, floor lamps and clip lamps using LED light sources.

4 Classification

Luminaires may be classified into indoor luminaires and outdoor ones according to the service places.

5 Product Information

5.1 In accordance with the requirements of Chapter 4 in GB/T 31897.201-2016.

5.2 The manufacturer or responsible distributor shall provide description of service place and installation mode of luminaires on product data sheets, printed matters, or web pages.

6 General Requirements

6.1 The design and structure of luminaires shall enable them to work safely in normal service, without any danger to people or surrounding environment, and to meet their claimed performance indexes, with reliable function in normal service. Generally, qualification shall be inspected with all specified tests.

6.2 Luminaires shall meet the requirements of GB 7000.204, GB/T 17743, GB 17625.1 and GB/T 18595.

7 Test Conditions

7.1 General test conditions

In accordance with the requirements of 6.1 in GB/T 31897.201-2016.

7.2 Luminaires with the LED modules indicated to be in accordance with IEC 62717 (Type A)

In accordance with the requirements of 6.2 in GB/T 31897.201-2016.

7.3 Luminaires with the LED modules not indicated to be in accordance with IEC 62717 (Type B)

In accordance with the requirements of 6.3 in GB/T 31897.201-2016.

7.4 Performance requirements

Performance requirements given in Table 1 are applicable to Type A and Type B luminaires. All the n tested luminaires shall meet the performance requirements.

Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Classification
5 Product Information
6 General Requirements
7 Test Conditions
8 Input Power
9 Light Output
10 Color Coordinate, Correlated Color Temperature and Color Rendering Index
11 Service Life of Luminaires
12 Sample Quantity