GB/T 34519-2017 in English
VALIDSpecifications of amusement device kiddie rocking category
- Issued on:2017-10-14
- Implemented on:2018-05-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$194.00
| Standard No: | GB/T 34519-2017 |
| Document status: | VALID |
| Title in English: | Specifications of amusement device kiddie rocking category |
| Title in Chinese: | 摇摆类游艺机技术条件 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2017-10-14 |
| Implemented on: | 2018-05-01 |
| ICS Classification: | 97.200.40-Playgrounds |
| Professional Classification: | GB-National Standard |
| Related Keywords: | amusement device
amusement facilities amusement machines amusement machines background swing-type amusement machines |
| Related Topics: | swing six
rocking curve peak rocking curve + peak swing instrument cargo swing GBT34519 GB/T 34519-2017 Process technology classification |
《GB/T 34519-2017摇摆类游艺机技术条件》由TC250（全国索道与游乐设施标准化技术委员会）归口，主管部门为国家标准化管理委员会。
Introduction
In-depth interpretation of GB/T 34519—2017 Technical conditions for swing amusement machines
Background and significance of standard formulation
As an important part of children's amusement facilities, the safety and reliability of swing amusement machines are directly related to the healthy growth of young people. The formulation of GB/T 34519—2017 "Technical conditions for swing amusement machines" aims to standardize the design, production and inspection process of such equipment to ensure that product quality meets national safety standards.
The standard was proposed and coordinated by the National Technical Committee for Standardization of Ropeways and Amusement Facilities, fully considering the current status of the industry and the level of technological development, and providing a scientific basis for the safe operation of amusement facilities.
Comparative Analysis of Standard Frameworks
| Chapter Number | Content Overview | Main Technical Requirements | Scope of Application |
|---|---|---|---|
| 1 | Scope | Specifies the product structure parameters, requirements, test methods and inspection rules of swing-type amusement machines. | Applicable to electric-driven swing-type amusement machines for amusement, not applicable to small non-powered facilities. |
| 5 | Requirements | Includes detailed technical indicators such as product manufacturing, basic requirements, seat design, performance of fiberglass and plastic parts. | Covering aspects such as material selection, structural design and safety protection of equipment. |
| 6 | Test methods | Includes routine inspection, mechanical properties test of FRP parts, physical and chemical properties test of plastic parts, etc. | Ensures that product quality meets standard requirements and ensures safe operation of equipment. |
| 7 | Inspection rules | Specifies the conditions and judgment rules for factory inspection and type inspection. | Applicable to mass production and new product identification process. |
Implementation suggestions and precautions
1. Design stage
Material selection: Ensure that the mechanical properties of FRP parts and plastic parts meet the requirements of Table 2 and Table 3. It is recommended to conduct material testing in the early stage of design.
Structural design: Follow the provisions of the transmission system in GB 8408, and reasonably set mechanical transmission protection isolation devices (such as telescopic sleeves, protective covers, etc.) to prevent passengers from contacting dangerous parts.
2. Production stage
Manufacturing process: The welding part should ensure that there are no defects such as leaking welding and burn-through, and all weld nodules and slags must be cleaned. Bolt connections must take anti-loosening measures, and pin connections must be prevented from falling off.
Lubrication and noise control: Fully lubricate the transmission parts to ensure that the mechanical movement noise does not exceed 70 dB(A) during operation (measured at 1 meter from the equipment).
3. Inspection and maintenance
Factory inspection: Each equipment must undergo no-load, full-load and eccentric load tests to ensure normal operation and no permanent deformation or damage.
Regular maintenance: It is recommended to conduct random inspections on the mechanical properties of fiberglass and plastic parts every year, especially for equipment used in high temperature and high humidity environments.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 34021-2017 in English
Small amusement device - Rocking equipment and seesaw
2017-09-29 -
GB/T 42100-2022 in English
Amusement park safety—Emergency management
2022-10-12 -
GB/T 18879-2020 in English
Specifications of summer toboggan run
2020-06-02
