GB/T 3478.2-1995 in English
SUPERSEDEDStraight cylindrical involute splines-30°pressure angle dimenslons tables
- Issued on:1995-07-12
- Implemented on:1996-05-01
- File Format:PDF
- Delivery:Via email within 5 business days
$728.00
《GB/T 3478.2-1995圆柱直齿渐开线花键 30°压力角 尺寸表》由TC109（全国机器轴与附件标准化技术委员会）归口，主管部门为国家标准化管理委员会。
本标准规定了30。标准压力角平齿根和圆齿根(以下简称300平齿根和300圆齿根)的圆柱直齿渐开线花键所需的全部花键尺寸。
本标准适用于GB/T 3478.1 标准中规定的压力角为300、模数为。.5至10m m、齿侧配合的渐开线花键。
Scope
This standard specifies all the spline dimensions required for cylindrical spur involute splines with 30° standard pressure angle flat root and rounded root (hereinafter referred to as 30° flat root and 30° round root). This standard applies to involute splines with a pressure angle of 30°, a modulus of 0.5 to 10mm, and side fits specified in GB/T3478.1.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 3478.1-2008 in English
Straight cylindrical involute splines - Metric module side fit - Part 1: Generalities
2008-09-22 -
GB/T 1564-2003 in English
Taper keys for general use
2003-06-05 -
GB/T 1144-2001 in English
Straight-sided spline--Dimensions,tolerances and verification
2001-01-02 -
GB/T 16922-1997 in English
Thin taper keys and their corresponding keyways
1997-07-02
