GB/T 3531-2014 in English

SUPERSEDED

Steel plates for low temperature pressure vessels

Issued on:2014-06-24
Implemented on:2015-04-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $160.00
$156.00

Standard No:	GB/T 3531-2014
Document status:	SUPERSEDED
Superseded by:	GB/T 713.3-2023 Steel plate,sheet and strip for pressure equipments―Part 3:Low alloy steel with specified low temperature properties
Superseded on:	2024-03-01
Title in English:	Steel plates for low temperature pressure vessels
Title in Chinese:	低温压力容器用钢板
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	2014-06-24
Implemented on:	2015-04-01
ICS Classification:	77.140.50-Flat steel products and semi-products
Chinese Classification:	H46-Steel sheet and strip
Professional Classification:	GB-National Standard
Related Keywords:	low temperature pressure vessels introductionthis standard low-temperature pressure vessels steel plates pressure vessels such steel plates
Related Topics:	Standard for Steel Plates for Pressure Vessels GB 3531-2014 GB 3531 Cryogenic devices for military use gb/t3531 a20 steel plate for pressure vessel Temperature and pressure instrument cryogenic pressure GB/T3531-2014 Low pressure pump pressure Nitrogen + cryostat Cryogenic pressure Cryogenic pressure Pressure vessel steel plate GB3531 GBT3531 GB/T 3531-2014 Pressure Vessel Plate Requirements Steel plates for pressure vessels Storage requirements for steel plates used in pressure vessels Cryogenic pressure vessel coating Laboratory cryogenic pressure vessel safety Pressure vessel insulation layer selection pressure vessel thermometer Pressure vessel plate blanking Pressure vessel workshop plate storage Pressure vessel thermometer sleeve Hengshui container board container board Changchun container board Jinan container board Normal pressure vessels use steel plates gbt3531 gbt3531-2014 Low temperature steel materials gb/t3531 bzfxw gb/t 3531

本标准规定了低温压力容器用钢板的订货内容、牌号表示方法、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书等。
本标准适用于制造-196 ℃~<-20 ℃低温压力容器用厚度为5mm~120mm 的钢板。

Introduction

This standard specifies the technical requirements, testing methods, and inspection rules for steel plates used in low-temperature pressure vessels. It covers the chemical composition, mechanical properties, and dimensional tolerances of the steel plates. The standard also outlines the procedures for sampling, preparation of test samples, and the evaluation of test results. Additionally, it includes provisions for the marking of products and packaging requirements. The standard is applicable to steel plates used in the manufacture of pressure vessels operating under low-temperature conditions. It provides a basis for the design, production, and quality control of such steel plates.

*** Please note: This description may not be accurate, please refer to the official documentation.

More samples: YD/T 3934-2021 GB 50021-2001(2009) JGJ 94-2008

Sample only — not a preview of GB/T 3531-2014

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

GB/T 15391-2010 in English

Dimension shape and tolerances for cold-rolled steel strips with a width less than 600 mm
2010-09-02
GB/T 25052-2024 in English

Dimension,shape,weight and tolerance for continuously hot-dip coated steel sheet and strip
2024-08-23
GB/T 12754-2019 in English

Prepainted steel sheet and strip
2019-03-25
GB/T 708-2019 in English

Dimension,shape,weight and tolerance for cold-rolled steel strip and sheet
2019-03-25
GB/T 40282-2021 in English

Hot-rolled twin roll cast steel sheets and strips of structural quality and high strength steel
2021-08-20
GB/T 5213-2019 in English

Cold rolled low carbon steel sheet and strip
2019-03-25
GB/T 19879-2023 in English

Steel plate for building structure
2023-09-07
GB/T 6653-2017 in English

Steel plates and strips for welded gas cylinders
2017-12-29
GB/T 31922-2015 in English

Hot-rolled steel sheets and srips of higher yield strength with improved formability
2015-09-11
GB/T 18847-2002 in English

Polyvinyl chloride laminated sheet-metal
2002-09-24