GB/T 36516-2018 in English
VALIDFe-Cr-Al wire and fiber for automotive purification filter
- Issued on:2018-07-13
- Implemented on:2019-04-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$185.00
| Standard No: | GB/T 36516-2018 |
| Document status: | VALID |
| Title in English: | Fe-Cr-Al wire and fiber for automotive purification filter |
| Title in Chinese: | 机动车净化过滤器用铁铬铝纤维丝 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2018-07-13 |
| Implemented on: | 2019-04-01 |
| ICS Classification: | 77.140.99-Other iron and steel products |
| Chinese Classification: | H58-Precision alloy |
| Professional Classification: | GB-National Standard |
| Related Keywords: | iron-chromium-aluminum fiber wire
iron-chromium-aluminum fiber fe-cr-al wire automotive purification filter introduction metal fiber |
| Related Topics: | FeCrAl
FeCrAlFeAl Filter purification coefficient FeCrAlR radon purifier Purifier how purifier How to use the purifier radon purifier radon purifier Baidu purifier radon purifier HEPA filter GBT36516 GB/T 36516-2018 filter mycelium |
《GB/T 36516-2018机动车净化过滤器用铁铬铝纤维丝》由TC183（全国钢标准化技术委员会）归口，TC183SC10（全国钢标准化技术委员会特殊合金分会）执行，主管部门为中国钢铁工业协会。
Introduction
1. Standard Overview
GB/T 36516-2018 "Iron-chromium-aluminum fiber wire for motor vehicle purification filter" standard specifies the brand, size and weight, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of iron-chromium-aluminum fiber and wire.
2. Scope of application of the standard
It is applicable to iron-chromium-aluminum fiber and wire for diesel engine exhaust particulate filter (DPF), and also to iron-chromium-aluminum fiber and wire for metal fiber felt or woven mesh used in chemical, petroleum and other industries.
| Category | Nominal diameter/mm | Allowance deviation/mm |
|---|---|---|
| Wire | 0.25~0.60 | ±0.020 |
| Fiber | 0.040, 0.035, 0.022, 0.012, 0.008 | ±0.002, ±0.0017, ±0.0011, ±0.0006, ±0.0004 |
3. Chemical composition requirements
The chemical composition of 00Cr20Al6 wire and fiber must comply with the requirements in the table, including the mass fraction ranges of carbon, silicon, manganese, sulfur, phosphorus, chromium, aluminum and other elements.
4. Mechanical properties standards
| Nominal diameter/mm | Strength state | Breaking strength/cN not less than | Elongation after fracture A/% not less than |
|---|---|---|---|
| 0.008 | High strength HS | 5.0 | 0.60 |
| Medium strength MS | 3.0 | 0.75 |
5. Antioxidant performance test
Fibers with nominal diameters of 0.035mm and 0.040mm must pass oxidation weight gain tests to ensure that their high-temperature oxidation resistance meets the requirements.
6. Implementation suggestions
In actual applications, users are advised to select appropriate grades and specifications according to specific needs, and strictly follow the inspection rules specified in the standards for quality control. At the same time, pay attention to surface quality and packaging requirements to ensure that the performance of the material is not affected during transportation and storage.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 34471.2-2017 in English
Elastic alloys - Part 2: Constant elastic alloys
2017-10-14 -
GB/T 31942-2015 in English
FeCrAl foil for metallic honeycomb substrates
2015-09-11 -
GB/T 19345.1-2017 in English
Amorphous and nanocrystalline alloys―Part 1:Fe-based amorphous soft magnetic alloy strips
2017-10-14 -
GB/T 37797-2019 in English
Precision alloys—Designation
2019-08-30 -
GB/T 38938-2020 in English
High strength and low expansion alloy
2020-06-02 -
GB/T 4461-2020 in English
Thermostat metal strip
2020-06-02 -
GB/T 14985-2007 in English
General rules of dimensions shape surface quality testing method and inspection for expansion alloys
2007-08-14
