GB/T 36636-2018 in English
VALIDIdentification cards—Specification for dual-interface integrated circuit card module
- Issued on:2018-09-14
- Implemented on:2019-04-01
- File Format:PDF
- Delivery:Within 1 day
$194.00
| Standard No: | GB/T 36636-2018 |
| Document status: | VALID |
| Title in English: | Identification cards—Specification for dual-interface integrated circuit card module |
| Title in Chinese: | 识别卡 双界面集成电路卡模块规范 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Within 1 day |
| Issued on: | 2018-09-14 |
| Implemented on: | 2019-04-01 |
| ICS Classification: | 35.240.15-Identification cards and related devices |
| Chinese Classification: | L70-Information processing technology in general |
| Professional Classification: | GB-National Standard |
| Related Keywords: | dual-interface integrated circuit card modules
circuit card module circuit card module introduction introduction circuit card module complies circuit card modules |
| Related Topics: | difference circle
ionization interface ionization interface Interface resistance Integrated interface data industry consensus twin crystal interface GBT36636 GB/T 36636-2018 Block detection integrated circuit Integrated gas system market size Card module packaging Circuit module naming convention |
《GB/T 36636-2018识别卡 双界面集成电路卡模块规范》由TC28（全国信息技术标准化技术委员会）归口，TC28SC17（全国信息技术标准化技术委员会卡及身份识别安全设备分会）执行，主管部门为国家标准化管理委员会。
Introduction
Introduction and Scope
GB/T 36636-2018 National Standard of the People's Republic of China "Specification for Dual-Interface Integrated Circuit Card Modules for Identification Cards" specifies in detail the design, manufacturing and testing requirements for dual-interface integrated circuit card modules. This standard applies to dual-interface IC card modules that support contact and contactless communications, ensuring their reliability and performance in various application scenarios.
Terms and Definitions
| Terms | Definition |
|---|---|
| Contact | A conductive element that maintains current continuity between an integrated circuit and an external interface device. |
| Contactless communication | No energizing components are required to exchange signals with the card and supply energy to the card. |
Module Characteristics
The characteristics of the dual-interface integrated circuit card module include lead-out terminals, electrical characteristics, environmental adaptability and restricted substance limits:
1. Lead-out terminals
The contacts are used for contact communication and consist of 6 or 8 rectangular contacts. The specific definitions are shown in the table below:
| Contact Number | Function Definition | Contact Number | Function Definition |
|---|---|---|---|
| C1 | Power Supply Voltage (VCC) | C5 | Ground (GND) |
| C2 | Reset signal (RST) | C6 | Reserved for future use (RFU) |
2. Electrical characteristics
The module must meet the specifications in terms of power supply voltage, operating current and contact resistance:
| Type | Minimum value (V) | Maximum value (V) |
|---|---|---|
| Type A | 4.50 | 5.50 |
| Type B | 2.70 | 3.30 |
3. Environmental adaptability
The module needs to maintain normal operation under conditions of temperature and humidity, magnetic field strength and electrostatic discharge:
| Conditions | Parameter requirements |
|---|---|
| Temperature (operating) | -25 ℃~50 ℃ |
| Magnetic field strength (13.56 MHz RMS) | 10 A/m to 18 A/m |
Test methods and quality assessment
The standard specifies detailed test methods, including lead-out terminal test, electrical characteristics verification and environmental adaptability evaluation. The quality assessment procedure is divided into finalization inspection, batch inspection and periodic inspection to ensure the quality consistency of the module at different stages.
Implementation suggestions
To ensure that the dual-interface integrated circuit card module complies with the GB/T 36636-2018 standard, it is recommended in practical applications:
- Design and produce in strict accordance with the standard, especially in terms of contact size and electrical characteristics.
- Select appropriate test equipment and methods to ensure that all test items meet the requirements.
- Take moisture-proof and shock-proof measures during storage and transportation to avoid damage to the module.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 44285.1-2024 in English
Cards and security devices for personal identification—Building blocks for identity management via mobile devices—Part 1: Generic system architectures of mobile eID systems
2024-08-23 -
GB/T 28826.3-2023 in English
Information technology—Common biometric exchange formats framework—Part 3: Patron format specifications
2023-05-23 -
GB/T 40694.4-2022 in English
Information technology―Pictograms,icons and symbols used in biometrics systems―Part 4:Fingerprint applications
2022-10-12 -
GB/T 36364-2018 in English
Information technology--Radio frequency identification--General specifications for tag at 2.45 GHz
2018-06-07 -
GB/T 42585-2023 in English
Information technology—Biometrics—General specification for fingerprint recognition module
2023-05-23
