GB/T 43535-2023 in English
VALIDHigh-purity germanium γ spectrometer
- Issued on:2023-12-28
- Implemented on:2024-07-01
- File Format:PDF
- Delivery:Within 1 day
$396.00
《GB/T 43535-2023高纯锗γ谱仪》由TC30(全国核仪器仪表标准化技术委员会)归口,TC30SC1(全国核仪器仪表标准化技术委员会通用核仪器和辐射探测器分会)执行,主管部门为国家标准委。
Introduction
Interpretation of the core content of the standard
GB/T 43535-2023 standard systematically regulates the technical requirements of high-purity germanium gamma spectrometers for the first time and establishes a complete performance evaluation system. This standard is applicable to spectrometer products with coaxial semiconductor detectors and provides key technical basis for the field of nuclear radiation detection.
Spectrometer Classification and Technology Comparison
| Type | Detector Configuration | Refrigeration Method | Typical Application Scenarios | Energy Range |
|---|---|---|---|---|
| Fixed Spectrometer | P-type/N-type Coaxial Detector | Liquid Nitrogen/Electrical Refrigeration | Laboratory Precision Analysis | 3keV-10MeV |
| Portable Spectrometer | P-type Coaxial Detector | Electrical Refrigeration Mainly | On-site Rapid Detection | 40keV-10MeV |
Analysis of key performance indicators
Energy resolution requirements
The standard adopts differentiated requirements for P-type/N-type detectors:
- P-type detector: FWHM≤1.00-1.55keV at 122keV (apparent efficiency segment)
- N-type detector: FWHM≤0.85-1.50keV at 5.9keV
Peak-to-Compton ratio indicator
The peak-to-Compton ratio requirement for all models of spectrometers for 60Co at 1332.5keV is ≥30:1, and the requirement for high-end models is ≥79:1
Key points of technical innovation
Liquid nitrogen condensing refrigeration system
The standard specifies the technical requirements of the new refrigeration system for the first time:
- Liquid nitrogen use time ≥ 1 year (fixed)
- Working noise ≤ 60dB@1m
- Safety pressure relief valve must be configured
Electromagnetic compatibility requirements
The IEC standard system is fully adopted, including:
- Electrostatic discharge immunity: ±8kV (air discharge)
- Radio frequency radiation immunity: 10V/m(80MHz-1GHz)
Implementation suggestions
Precautions for manufacturers
- Strictly distinguish the test requirements for P-type/N-type detectors
- Establish a complete environmental test verification system
- The software functions must meet all the requirements of Article 5.1.2.8 of the standard
Key points for testing agency operations
- Standard test conditions control: temperature 18-30℃, humidity 30-75%
- Use standard sources such as 241Am, 137Cs, 60Co for calibration
- Note the different test cycle requirements for fixed and portable spectrometers

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 4861-2008 in English
Analogue counting ratemeters - Characteristics and test methods
2008-06-19