GB/T 44165.9-2025 in English
VALIDDetermination of key chemicals in consumer products—Part 9： Hexabromocyclododecanes
- Issued on:2025-05-30
- Implemented on:2025-12-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$204.00
《GB/T 44165.9-2025消费品中重点化学物质检测方法 第9部分：六溴环十二烷》由TC508（全国消费品安全标准化技术委员会）归口，主管部门为国家标准委。
Introduction
Analysis of standard technical framework
| Technical elements | GB/T 44165.9—2025 | International general method | Innovation points |
|---|---|---|---|
| Pretreatment technology | Rapid solvent extraction(120℃/10MPa) | Soxhlet extraction | Efficiency increased by 3 times |
| Purification method | Acidic silica gel SPE column(44% H₂SO₄) | Neutral silica column | Removal rate of interferences＞95% |
| Detection limit | 10.0μg/kg | 15.0μg/kg | Sensitivity increased by 50% |
Key points of hexabromocyclododecane detection
This method uses high performance liquid chromatography-mass spectrometry to detect three isomers (α/β/γ-HBCDDs). The key parameters include:
- Chromatographic column: C18 column (2.1×100mm, 2.2μm)
- Mobile phase: methanol-10mmol/L ammonium acetate gradient elution
- Monitoring ion: m/z 640.5 (negative ion mode)
Solutions to implementation difficulties
Case: Automobile interior material testing
When a car company tested seat foam materials, it was found that:
- Matrix interference: Plasticizers caused γ-HBCDD peak overlap → RSD dropped from 18% to 5% after acid silica gel purification
- Recovery rate control: When adding 30μg/kg standard, the recovery rate was increased from 75% to 92% by optimizing the number of extraction cycles (2 times → 3 times)
Standard evolution analysis
Compared with GB/T 32883-2016 electronic and electrical product standard, the progress of this document is reflected in:
- The scope of application is expanded to new materials such as plastics/rubbers/adhesives
- The introduction of Rapid solvent extraction technology replaces traditional methods
- Precision requirements are tightened from 20% to 15%
Laboratory operation suggestions
- Sample crushing requires liquid nitrogen freezing to prevent thermal decomposition of HBCDDs
- The standard curve should contain 7 concentration points (0.1-10mg/L)
- Set 5% parallel samples for quality control of each batch of samples
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 44165.4-2024 in English
Determination of key chemicals in consumer products—Part 4: 1, 4 - dichlorobenzene
2024-06-29 -
GB/T 44165.12-2026 in English
Determination of key chemicals in consumer products—Part 12: Thiourea and its derivatives
2026-01-28 -
GB/T 31708-2015 in English
Safety of sporting goods―Risk assessment guidelines
2015-06-02 -
GB/T 30135-2013 in English
Description Specification on the Risk Information of Consumer Products Safety
2013-12-17 -
GB/T 39102-2020 in English
Specification for operation management of biochar production from crop staw on soil quality improvement project
2020-10-21 -
GB/T 29467-2012 in English
Implement specifications for enterprise quality trustworthiness management
2012-12-31 -
GB/T 29289.2-2025 in English
Safety in consumer products life cycle—Part 2: Design
2025-05-30
