GB/T 45007-2024 in English
VALIDOccupational health and safety management systems—Guidance for small organizations on implementation of GB/T 45001—2020
- Issued on:2024-03-15
- Implemented on:2024-03-15
- File Format:PDF
- Delivery:Via email within 5 business days
$592.00
《GB/T 45007-2024职业健康安全管理体系 小型组织实施GB/T 45001—2020指南》由424-cnis（中国标准化研究院）归口，主管部门为市场监管总局。
Introduction
Standard technology evolution and formulation background
GB/T 45007-2024, as a supporting implementation guide for GB/T 45001-2020, has been specially optimized for the characteristics of small organizations with less than 50 employees. The standard formulation refers to the technical content of the ISO/UNIDO manual, and combined with the national conditions of my country where small and micro enterprises account for 97%, the administrative requirements in the international standards are converted into localized expressions such as regulatory departments.
Comparison of core elements of the standard framework
| Comparison dimensions | Requirements for large organizations | Optimization for small organizations |
|---|---|---|
| Documented information | A complete three-level document system needs to be established | Non-traditional forms such as visual dashboards are allowed |
| Risk assessment | Quantitative analysis method | Simplified qualitative evaluation matrix |
| Emergency drills | Quarterly comprehensive drills | Scenario-based segment drills |
Analysis of key technologies for hazard source control
Practical case: Risk control in machining workshops
A hardware processing plant with 20 employees applied standard requirements to implement hierarchical control of CNC lathe operations:
- Eliminate levels: Eliminate old belt drive equipment
- Engineering control: Install photoelectric emergency stop device
- Management measures: Establish equipment inspection QR code system
Key points for implementing the PDCA cycle
| Phase | Implementation tools | Output results |
|---|---|---|
| Planning (P) | SWOT Analysis Matrix | Annual Safety Goal List |
| Implementation (D) | 5W1H Task Breakdown Table | Equipment Modification Acceptance Report |
| Inspection (C) | LEC Risk Assessment Method | Compliance Assessment Record |
| Improvement (A) | Fishbone Diagram Analysis Method | Management Review Resolution |
Implementation Suggestions and Common Misunderstandings
Typical Problem: Documented Information Overload
A small and micro enterprise once established 78 procedure documents, and the actual implementation rate was less than 40%. After optimization according to clause 7.5 of the standard:
- Use WeChat applet to replace paper records
- Video guidance on key control points
- The total number of documents reduced by 62%
Charts to illustrate the key points of the standard
The standard appendix contains 8 normative charts, including:
- Figure 1: Mapping relationship between PDCA and standard clauses
- Table 6: Communication matrix must contain 5 basic elements
- Table 8: List of 22 mandatory documented information
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 33000-2025 in English
Requirements of work safety management system for large and medium-sized enterprises
2025-10-31 -
GB/T 47911-2026 in English
Requirements of work safety management system for small and micro-sized enterprises
2026-07-30 -
GB/T 45001-2020 in English
Occupational health and safety management systems—Requirements with guidance for use
2020-03-06 -
GB 6721-2025 in English
Statistical requirements for direct economic losses caused by work safety accidents
2025-12-31
