GB/T 45274-2025 in English
TO BE VALIDJuvenile products—General technical requirements for sensory integration training products
- Issued on:2025-02-28
- Implemented on:2026-09-01
- File Format:PDF
- Delivery:Via email within 5 business days
$553.00
| Standard No: | GB/T 45274-2025 |
| Document status: | TO BE VALID |
| Title in English: | Juvenile products—General technical requirements for sensory integration training products |
| Title in Chinese: | 婴童用品 感统训练产品通用技术要求 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 5 business days |
| Issued on: | 2025-02-28 |
| Implemented on: | 2026-09-01 |
| ICS Classification: | 97.190-Equipment for children |
| Chinese Classification: | Y53-Other teaching aids |
| Professional Classification: | GB-National Standard |
| Related Keywords: | sensory integration training products introduction interpretation
vestibular training products proprioception training products sensory training equipment sensory integration products |
| Related Topics: | supplies
infant |
《GB/T 45274-2025婴童用品 感统训练产品通用技术要求》由SWG18（全国婴童用品标准化工作组）归口，主管部门为国家标准委。
Introduction
Interpretation of the core content of the standard
This standard applies to sensory training equipment for children under 12 years old, such as vestibular training products and proprioception training products. It systematically standardizes the safety technical system of sensory integration products for the first time.
Comparison of key technical requirements
| Item | Less than 36 months | More than 36 months |
|---|---|---|
| Small parts restrictions | Prohibited | Warning signs required |
| Colour fastness of textiles | ≥Grade 3-4 | ≥Grade 3 |
| Formaldehyde limit | ≤30mg/kg | Not required |
Key points of mechanical and physical safety
Sharp edge control: Products intended for children under 96 months of age shall not have dangerous sharp edges in accessible parts after the 6.4 test (test force ≤ 0.68N·m).
Structural stability: Products with a height of > 760mm and a mass of > 4.5kg must pass the 15° tilt test (6.12) to prevent the risk of tipping.
Chemical safety limits
Plasticizer control: The total content of 4 phthalates such as DEHP is ≤ 0.1% (6.18 test), and 3 substances such as DINP are additionally restricted for parts in contact with the mouth.
Polycyclic aromatic hydrocarbons: The total content of 8 PAHs such as benzo(a)pyrene in rubber/plastic materials is ≤ 1mg/kg (6.21 test).
Typical test methods
Drop test: Products under 18 months old need to drop from a height of (138±5)cm 10 times (Table 10). After the test, they should still meet the functional requirements of 5.4.
Sound pressure test: Sound-emitting products A-weighted sound pressure level ≤85dB, C-weighted peak ≤115dB (6.13 test).
Implementation Suggestions
1. Age-grading management: Strictly distinguish between the 36-month/96-month age groups, and implement differentiated management and control of the choking risks of small balls, marbles, etc.
2. Material selection: Prioritize environmentally friendly plasticizers that comply with GB/T 22048, and avoid the use of recycled rubber materials
3. Process control: Injection molded parts need to be deburred, and metal parts should be electroplated for rust prevention (Clause 5.2c)
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
