GB/T 5617-1985 in English

SUPERSEDED

Determination of effective depth of hardening after induction or flame hardening of steel

Issued on:1985-01-01
Implemented on:1986-08-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $180.00
$175.00

Standard No:	GB/T 5617-1985
Document status:	SUPERSEDED
Superseded by:	GB/T 5617-2005 Determination of effective depth of handening after induction or flame handening of steel
Superseded on:	2006-01-01
Title in English:	Determination of effective depth of hardening after induction or flame hardening of steel
Title in Chinese:	钢的感应淬火或火焰淬火后有效硬化层深度的测定
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	1985-01-01
Implemented on:	1986-08-01
ICS Classification:	77.040.30-Chemical analysis of metals
Chinese Classification:	H22-Metal mechanical property test method
Professional Classification:	GB-National Standard
Related Keywords:	effective depth flame hardening induction hardening layer depth steel scopethis standard applies
Related Topics:	Quenching quenching effect Quenching after polymerization after flame unstable flame flame fire Determination of nickel without flame Quenching + Instrument unstable flame Quenching instrument GBT5617 GB/T 5617-1985 GB/T 5617-2005 hardened layer Quenching Induction hardening hardness testing Hardened layer depth detection method Test standard for hardened layer of steel products Effective hardened layer depth of sintered material Induction hardening effective hardened layer detection Surface quenching hardness depth determination Foreign induction hardening quality Quenching pool Effective hardened layer depth of nitriding gb/t 5617 gb/t5617 Effective hardened layer depth inspection gbt5617-2005 gb 5617 Induction Hardening in the USA gb/t 5617- gb/t 5617-1985

《GB/T 5617-1985钢的感应淬火或火焰淬火后有效硬化层深度的测定》。

Scope

This standard applies to: a. The depth of the hardened layer of induction hardening or flame hardening is greater than 0.3mm. b. After surface quenching, the hardness at three times the effective hardened layer depth (DS) from the surface must be lower than the ultimate hardness (HV_HL) minus 100. If this condition cannot be met, it may be stipulated that a higher ultimate hardness value shall be used to determine the effective hardened layer depth after the agreement of the parties concerned.

More samples: NB/T 47013.2-2015 DL/T 5154-2012 JJG 21-2008

Sample only — not a preview of GB/T 5617-1985

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.