GB/T 7672.23-2008 in English
VALIDGlass-fiber wound winding wires - Part 23: Glass-fiber wound resin or varnish impregnated bare or enamelled round copper wire temperature index 180
- Issued on:2008-06-30
- Implemented on:2009-05-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$68.00
| Standard No: | GB/T 7672.23-2008 |
| Document status: | VALID |
| Title in English: | Glass-fiber wound winding wires - Part 23: Glass-fiber wound resin or varnish impregnated bare or enamelled round copper wire temperature index 180 |
| Title in Chinese: | 玻璃丝包绕组线 第23部分:180级浸漆玻璃丝包铜圆线和玻璃丝包漆包铜圆线 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2008-06-30 |
| Implemented on: | 2009-05-01 |
| ICS Classification: | 29.060.10-Wires |
| Chinese Classification: | K12-Wire with insulation layer |
| Professional Classification: | GB-National Standard |
| Related Keywords: | round copper wire temperature index
round copper wire fiber-clad copper round wire fiber-clad copper round glass-fiber wound resin |
| Related Topics: | iec grade copper wire
Glass Packaging Characteristics Glass fiber wrapped copper wire Glass filament dissolves Primary wire clad copper wire glass paint Round wire glass wool Molybdenum glass paint glass wool GB/T 7672.23 GB/T 7672.23-2008 round line fiberglass threader silk screen glass Enameled wire pinhole test Glass wool tape execution Insulating varnish for wire |
《GB/T 7672.23-2008玻璃丝包绕组线 第23部分:180级浸漆玻璃丝包铜圆线和玻璃丝包漆包铜圆线》由TC213(全国电线电缆标准化技术委员会)归口,TC213SC1(全国电线电缆标准化技术委员会绕组线分会)执行,主管部门为中国电器工业协会。
GB/T 7672《玻璃丝包绕组线》分为15个部分,本部分为GB/T 7672的第22部分。
本部分为首次发布。
本部分等同采用IEC 60317-49:1999《特种绕组线标准 第49部分:温度指数180玻璃丝包、树脂或漆粘裸或漆包铜圆线》第1版(英文版)。
GB/T 7672的本部分规定了温度指数180、浸漆玻璃丝包铜圆线和浸漆玻璃丝包、1级或2级漆膜厚度漆包铜圆线的要求。其中浸渍漆,例如可为聚酯或聚酯亚胺树脂漆。
为便于使用,本部分做了下列编辑性修改:
――删除了IEC 60317-49:1999前言和引言;
――第2章采用了适用于我国标准的引用语,删除了IEC 60317-49:1999的引用语;
――按照IEC 60317-0-6:2007《特种绕组线标准 第0-6部分:玻璃丝包、树脂或漆粘结裸或漆包铜圆线 一般规定》标准规定,将IEC 60317-49:1999第1章中的G2改为GL2,Grade 1G1和Grade 1G2改为Grade 1 GL1和Grade 1 GL2,Grade 2 GL1和Grade 2 GL2改为Grade 2 GL1和Grade 2 GL2。
Scope
This part of GB/T 7672 specifies the requirements for temperature index 180, impregnated glass fiber-clad copper round wire and impregnated glass fiber-wrapped, grade 1 or grade 2 paint film thickness enamelled round copper wire. The impregnating varnish can be, for example, a polyester or polyesterimide resin varnish. The enameled wire shall be based on one of the following standards: GB/T 6109.5-2008, GB/T 6109.20-2008 or GB/T 6109.22-2008, and shall be determined through negotiation between the supply and demand parties. The temperature index of glass fiber-clad copper round winding wire depends on the type of impregnating varnish used. The impregnating varnish which impregnates the glass filaments preferably has a temperature index of at least 180. The glass fiber cladding can be: a) single glass fiber wrapping; b) double glass fiber wrapping, the two layers of glass fiber wrapping are in opposite directions. The range of nominal diameters of conductors in this part is as follows: - double glass filaments (GL2) wrapped on bare conductors: from 0.500mm up to and including 5.000mm; ): from 0.500mm up to and including 1.600mm; -wrapped glass filaments on enamelled wires of grade 2 film thickness (Grade2 GL1 and Grade2 GL2): from 0.500mm up to and including 5.000mm. For the nominal diameter of the conductor, see the regulations in Chapter 4 of GB/T 7672.21-2008.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 4074.7-2024 in English
Test methods of winding wires—Part 7: Test procedure for the determination of the temperature index of enamelled winding wires
2024-10-26 -

GB/T 23310-2009 in English
Aromatic polyimide tape wrapped rectangular copper wire,class 240
2009-03-19 -

GB/T 7095.1-2008 in English
Enamelled rectangular copper winding wires - Part 1: General requirements
2008-06-13 -

GB/T 4884-1985 in English
Marking of insulated conductors
1985-02-04 -

GB/T 4074.1-2024 in English
Test methods of winding wires—Part 1:General
2024-04-25