GB/T 7940.1-2008 in English
VALIDPneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector
- Issued on:2008-06-25
- Implemented on:2009-01-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$97.00
| Standard No: | GB/T 7940.1-2008 |
| Document status: | VALID |
| Title in English: | Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector |
| Title in Chinese: | 气动 五气口方向控制阀 第1部分：不带电气接头的安装面 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2008-06-25 |
| Implemented on: | 2009-01-01 |
| Superseding: |
GB/T 7940.1-2001 Pneumatic fluid power-Five-port directional control valves-Part 1:Mounting interface surfaces without electrical connector
|
| ICS Classification: | 23.100.50-Control components |
| Chinese Classification: | J20-Hydraulic and pneumatic device |
| Professional Classification: | GB-National Standard |
| Related Keywords: | pneumatic five-port directional control valve
five-port directional control electrical connector scopethis part pneumatic fluid power control mechanism |
| Related Topics: | brake air connector
GB/T 7940.1 GB/T 7940.1-2001 GB/T 7940.1-2008 directional control valve American standard pneumatic connector Breath |
《GB/T 7940.1-2008气动 五气口方向控制阀 第1部分：不带电气接头的安装面》由TC3（全国液压气动标准化技术委员会）归口，TC3SC2（全国液压气动标准化技术委员会气压传动和控制分会）执行，主管部门为中国机械工业联合会。
GB/T7940的本部分规定了不带电气接头的气动五气口方向控制阀,当最高使用压力为1.6 MPa时,其安装面要求如下:
---安装面外形尺寸和公差;
---气口的标识;
---控制机构驱动结果的标识。
本部分不适用于安装面的功能特征。
Scope
This part of GB/T 7940 specifies the pneumatic five-port directional control valve without electrical connectors. When the maximum operating pressure is 1.6MPa, the installation surface requirements are as follows: ——The overall dimensions and tolerances of the installation surface: ——The identification of the air port : - identification of the control mechanism driving results. This section does not apply to the functional characteristics of the mounting surface.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 20081.1-2021 in English
Pneumatic fluid power—Compressed air pressure regulators and filter-regulators—Part 1:Main characteristics to be included in literature from suppliers and product-marking requirements
2021-08-20 -
GB/T 39831-2021 in English
Hydraulic fluid power—Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10—Clamping dimensions
2021-03-09 -
GB/T 2514-2008 in English
Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
2008-02-28 -
GB/T 22107-2025 in English
Pneumatic fluid power—Directional control valves—Measurement of shifting time
2025-03-28 -
GB/T 2877.2-2021 in English
Hydraulic two-port slip-in cartridge valves—Part 2: Mounting dimensions
2021-04-30 -
GB/T 32215-2015 in English
Pneumatic fluid power―Identification of ports andcontrol mechanisms of control valves and other components
2015-12-10 -
GB/T 36703-2018 in English
Hydraulic fluid power—Pressure switches—Mounting surfaces
2018-09-17 -
GB/T 7940.2-2008 in English
Pneumatic fluid power - Five-port directional control valves - Part 2: Mounting interface surfaces with optional electrical connector
2008-06-25 -
GB/T 8100.2-2021 in English
Mounting surfaces of hydraulic valves—Part 2：Compensated flow-control valves
2021-12-31
