GB/T 8014.2-2005 in English

VALID

Anodizing of aluminium and its alloys - The measuring method of thickness of anodic oxide coatings - Part 2: Mass-loss method

Issued on:2002-05-29
Implemented on:2002-12-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $110.00
$107.00

Standard No:	GB/T 8014.2-2005
Document status:	VALID
Title in English:	Anodizing of aluminium and its alloys - The measuring method of thickness of anodic oxide coatings - Part 2: Mass-loss method
Title in Chinese:	铝及铝合金阳极氧化氧化膜厚度的测量方法第2部分：质量损失法
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	2002-05-29
Implemented on:	2002-12-01
Superseding:	GB/T 8015.1-1987 Test methods for thickness of anodic oxidation coatings on aluminium and aluminium alloys; Gravimetric method
ICS Classification:	25.220.40-Metallic coatings
Chinese Classification:	H25-Metal chemical property test method
Professional Classification:	GB-National Standard
Related Keywords:	mass-loss method scopethis part mass loss method anodic oxide coatings oxide film aluminum alloys
Related Topics:	polarization loss polarization loss quality loss Method of Measuring Film Thickness Anodized film thickness film thickness film density film thickness Oxide film thickness Oxide film Oxide film weight film thickness measurement and Aluminum Anodized Aluminum Oxidation Anodizing Aluminum alloy anodizing Inorganic aluminum oxide film Aluminum alloy and its anodized film detection quality loss Aluminum alloy anodizing Aluminum Alloy Oxidation Oxidation Measurement Method Oxide film Tantalum oxide film thickness Aluminum alloy anode Aluminum and aluminum alloy anodizing Aluminum oxide film thickness GBT8014.2 GB/T 8014.2-2005 Aluminum hydroxide national standard quality Electroplating film thickness measurement method Measurement method of electroplating film thickness Oxide film thickness measurement method How to measure the thickness of oxide layer Chemically Conductive Oxide Layer Thickness Measurement Aluminum anodized film thickness Measurement method of dissolved oxygen electrode Correction method of mercury oxide electrode Optimization of gradient methods for highly polar substances Product quality of alumina powder Alumina digestion method Aluminum hydroxide product quality

《GB/T 8014.2-2005铝及铝合金阳极氧化氧化膜厚度的测量方法第2部分:质量损失法》由TC243（全国有色金属标准化技术委员会）归口，TC243SC1（全国有色金属标准化技术委员会轻金属分会）执行，主管部门为中国有色金属工业协会
本部分规定了用质量损失法测定铝及铝合金阳极氧化膜单位面积质量(表面密度)，并估算氧化膜平均厚度的方法。本部分适用于铜含量不大于6％的铸造或变形铝及铝合金生成的所有阳极氧化膜。

Scope

This part specifies the method for determining the mass per unit area (surface density) of aluminum and aluminum alloy anodized film by mass loss method and estimating the average thickness of the oxide film. This standard applies to cast or wrought aluminum and aluminum alloys with a copper content not greater than 6% for all anodized films.

More samples: DL/T 5154-2012 JGJ 94-2008 GB 18306-2015

Sample only — not a preview of GB/T 8014.2-2005

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

GB/T 8014.1-2005 in English

Anodizing of aluminium and its alloys - The measuring method of thickness of anodic oxide coatings - Part 1: The measuring principle
1988-06-24

GB/T 8014.2-2005 in English

Anodizing of aluminium and its alloys - The measuring method of thickness of anodic oxide coatings - Part 2: Mass-loss method

We also recommend

GB/T 8014.1-2005 in English