GB/T 8358-2014 in English

《GB/T 8358-2014钢丝绳 实际破断拉力测定方法》由TC183（全国钢标准化技术委员会）归口，主管部门为中国钢铁工业协会。
本标准规定了钢丝绳实际破断拉力测定方法的术语和定义、试验原理、试样制备、试验设备、试验程序、试验报告等。
本标准适用于各种钢丝绳产品实际破断拉力的测定。合金浇注法适用于钢丝绳直径大于等于6mm或钢丝直径大于等于0.5mm 钢丝绳;树脂浇注法和套管压制法适用于所有类型的钢丝绳;直接夹持法适用于单股钢丝绳,也适用于其他结构的钢丝绳;缠绕法适用于直径不大于20mm 钢丝绳。

Steel Wire Ropes — Determination of Measured Breaking Force


1 Scope

This standard specifies terms and definitions, test principle, sample preparation, test equipment, test procedure and test report for the determination of measured breaking force of steel wire ropes.

This standard is applicable to the determination of measured breaking force of different kinds of steel wire rope products. The method of alloy poured socketing is applicable to steel wire ropes of diameter greater than or equal 6mm, or of wire rope diameter greater than or equal 0.5mm; the method of resin pouring and method of ferrule pressing are applicable to all kinds of steel wire ropes; the method of directly gripping is applicable to steel wire ropes in single-strand and other structures; the method of wrapping is applicable to steel wire ropes of diameter not greater than 20mm.

2 Normative References

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB/T 8706 Steel Wire Ropes — Vocabulary, Designation and Classification (GB/T 8706-2006, ISO 17893:2004, IDT)

GB/T 16825.1 Verification of Static Uniaxial Testing Machines — Part 1: Tension/Compression Testing Machines — Verification and Calibration of the Force-measuring System (GB/T 16825.1-2008, ISO 7500-1:2004, IDT)

3 Terms and Definitions

For the purpose of this document, the terms and definitions given in GB/T 8706 and the following apply.