HB 3663-1986 in English
VALIDMechanical and Manual Screw Tap for Regular Screw Thread of Dead Hole in Light Alloy Machining d=1~1.2mm
- Issued on:1986-03-11
- Implemented on:1986-06-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$30.00
| Standard No: | HB 3663-1986 |
| Document status: | VALID |
| Title in English: | Mechanical and Manual Screw Tap for Regular Screw Thread of Dead Hole in Light Alloy Machining d=1~1.2mm |
| Title in Chinese: | 加工轻合金不通孔普通螺纹的机、手用丝锥 d＝1~1.2mm |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 1986-03-11 |
| Implemented on: | 1986-06-01 |
| Professional Classification: | HB-Aviation |
| Related Keywords: | light alloy machining
manual screw tap light alloy parts regular screw thread dead hole |
| Related Topics: | Ordinary spray gold
Machining of light alloy steel iso 3663 |
Scope
This standard applies to through-hole and non-through-hole GB192-81, GB193-81, GB196-81, GB197-81, GB2515-81, GB2516-81 ordinary threads on light alloy parts cut by motor or manual.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
HB 7151.1-1995 in English
Combined Clamp Interchangeable Parts - Pin Roll
1995-12-13 -
HB 4633-1992 in English
Cylindrical Die Roll of MJ Threaded Bolt for Machining High Strength Steel Type 54-12
1993-02-22 -
HB 893-1990 in English
Cold punching mould base and its technical conditions
1990-09-18 -
HB 806-1990 in English
Lower die base of steel mold for guide pillars after cold-punching mould
1990-09-18 -
HB 6828.1-1993 in English
Typical Combination of Cold-punching Mould - A-type Typical Combination of Decompression Unloading
1994-06-01 -
HB 4409-1990 in English
Cold Die Rolling Guide Steel Frame Center Guide Pillar Steel Frame
1990-09-18 -
HB 3864-1986 in English
Morse Taper Shank Welded Hard Alloy Helical Drill-end Milling Cutter Used for Machining Light Alloy
1986-07-14 -
HB 6723.10-1993 in English
Depth Vernier Caliper Handle
1993-08-01 -
HB 7030.12-1994 in English
Interchangeable Parts and Locating Clamping Element - Quick Release Locating Clamping Mandrel
1994-10-31 -
HB/Z 255-1994 in English
Design and Calculation of Spherical Floating Part
1994-10-31
