Machining of light alloy steel

Machining of light alloy steel, Total:228 items.

The international standard classification for "Machining of light alloy steel" includes: Milling tools , Powder metallurgy .

The Chinese standard classification for "Machining of light alloy steel" includes: Cutting tools , Powder metallurgy material and product .

Professional Standard - Aviation

HB 673-1979 Shell milling cutter for processing light alloy D=50~80mm
HB 723-1979 Teeth for insert shell milling cutters for machining light alloy welded carbide inserts
HB 760-1979 Test methods for milling cutters for machining light alloys
HB 3661-1986 Plain Bed Lathe, Hand Screw Tap for Regular Screw Thread of Through Hole in Light Alloy Machining d=8mm
HB 3863-1986 7:24 Taper Shank Welded Hard Alloy Long-blade Helical Milling Cutter Used for Machining Light Alloy
HB 661-1979 D = 18~50mm for semicircular head end mills for processing light alloys
HB 3668-1986 Mechanical and Manual Screw Tap for Regular Screw Thread of Dead Hole in Light Alloy Machining d=12~36mm
HB 4587-1992 Slot milling cutter for two-tooth end milling cutter for machining light alloy D=30～75mm
HB 4597-1992 Slot Milling Cutter Cylindrical Milling Cutter for Machining Light Alloy D=71~80mm
HB 3861-1986 Morse Taper Shank Welded Hard Alloy Long-blade Helical Milling Cutter Used for Machining Light Alloy
HB 2358-1977 Slotless machine for processing light alloy through hole HB241-75 thread, hand tap d=8mm
HB 3662-1986 Plain Bed Lathe, Hand Screw Tap for Regular Screw Thread of Through Hole in Light Alloy Machining d=10~36mm
HB 696-1992 Milling Cutter - Tipped Three-edge Milling Cutter for Machining Light Alloy D=200~315mm
HB 2366-1977 Spiral fluting machine for processing light alloy non-through hole HB241-75 thread, hand tap d=8mm
HB 677-1979 D = 50~125mm for shell type end mills with welded carbide helical blades for processing light alloys
HB 2363-1977 Machine and hand taps d=12~36mm for processing light alloy non-through hole HB 241-75 thread
HB 696-1979 D = 200~315mm
HB 679-1992 Milling Cutter - Tipped Sleeve Facing Type Cutter for Welding Cemented Carbide Blade for Machining Light Alloy D=100~200mm
HB 4625-1992 Milling Cutter - Three-gear Morse Taper Shank End-milling Cutter Machining Light Alloy D=14~50mm
HB 2362-1977 Machine and hand taps d=8~11mm for processing light alloy non-through hole HB 241-75 thread
HB 692-1992 Milling Cutter - Side Set Three-edge Milling Cutter Machining Light Alloy D=63~100mm
HB 666-1979 D = 18~50mm for end mills with helical carbide inserts for processing light alloys
HB 722-1979 High Speed Steel Teeth for Machining Light Alloy Inserted Shell Type Face Mills
HB 3665-1986 Mechanical and Manual Screw Tap for Regular Screw Thread of Dead Hole in Light Alloy Machining d=3~3.5mm
HB 3660-1986 Plain Bed Lathe, Hand Screw Tap for Regular Screw Thread of Through Hole in Light Alloy Machining d=3~7mm
HB 3865-1986 7:24 Taper Shank Welded Hard Alloy Helical Milling Cutter Used for Machining Light Alloy
HB 695-1979 Insert tooth three-edge milling cutter for processing light alloy D=80～180mm
HB 2359-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=10~36mm
HB 683-1979 D = 250~315mm for inserting sleeve type face milling cutter for welding carbide inserts for processing light alloys
HB 4626-1992 Milling Cutter - Two-gear Morse Taper Shank Bulb End-milling Cutter for Light Alloy Machining d=8~50mm
HB 673-1992 Milling Cutter - Shell End Milling Cutter Machining Light Alloy D=50~80mm
HB 665-1979 D = 10~16mm for end mills with helical carbide inserts for processing light alloys
HB 4595-1992 Slot Milling Cutter for Shell End Milling Cutter for Machining Light Alloy D=63~80mm
HB 2356-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=1~3.5mm
HB 3867-1986 7:24 Taper Shank Welded Hard Alloy Long-blade Helical Drill-end Milling Cutter Used for Machining Light Alloy
HB 688-1992 Milling Cutter - Processed Light Alloy Tipped Double-edge Milling Cutter (D=80~315mm)
HB 678-1992 Inserted sleeve type face milling cutter for processing light alloy D=80~200mm
HB 688-1979 D = 80~315mm
HB 700-1992 Milling Cutter - Metal Saw Machining Light Alloy D=63~200mm
HB 722-1992 High Speed Steel Cutter Tooth for Milling Cutter Machining Light Alloy Tipped Sleeve Facing Type Cutter
HB 4591-1992 Slot Milling Cutter for Three-tooth End Milling Cutter for Machining Light Alloy D=45~80mm
HB 3666-1986 Mechanical and Manual Screw Tap for Regular Screw Thread of Dead Hole in Light Alloy Machining d=4~7mm
HB 656-1979 Three-tooth taper shank end mill D=18~50mm for processing light alloy
HB 3664-1986 Mechanical and Manual Screw Tap for Regular Screw Thread of Dead Hole in Light Alloy Machining d=1.4~2.5mm
HB 4623-1992 Milling Cutter - Two-gear Common Straight Shank End Milling Cutter Machining Light Alloy D=1.5~20mm
HB 683-1992 Milling Cutter Tipped Sleeve Facing Type Cutter for Welding Cemented Carbide Blade for Machining Light Alloy D=250~315mm
HB 725-1979 High-speed steel teeth for machining light alloy insert double-sided and three-sided milling cutters
HB 647-1979 Cylindrical milling cutter for processing light alloy D=50~100mm
HB 4197-1989 d=7.7~25mm Machine Reamer with Front & Rear Guides Used for Processing Hardened Steel Carbide Alloy
HB 682-1979 Inserted sleeve type face milling cutter for processing light alloy D=250~315mm
HB 4200-1989 Technical conditions for machine reamer of hard alloy for machining quenched steel
HB 653-1979 Two-tooth tapered shank end mill for processing light alloy D=18~50mm
HB 3667-1986 Mechanical and Manual Screw Tap for Regular Screw Thread of Dead Hole in Light Alloy Machining d=8~11mm
HB 4624-1992 Milling Cutter - Two-gear Ordinary Morse Taper Shank End-milling Cutter for Light Alloy Machining d=12~50mm
HB 4586-1992 Template and reference template for two-tooth end milling cutter grinding wheel for machining light alloy
HB 3663-1986 Mechanical and Manual Screw Tap for Regular Screw Thread of Dead Hole in Light Alloy Machining d=1~1.2mm
HB 3659-1986 Plain Bed Lathe, Hand Screw Tap for Regular Screw Thread of Through Hole in Light Alloy Machining d=1~2.5mm
HB 2357-1977 No-groove machine for processing light alloy through hole HB 241-75 thread, hand tap d=4~7mm
HB 663-1979 Short taper shank end mill for processing light alloy D=16~40mm
HB 682-1992 Milling Cutter - Tipped Sleeve Facing Type Cutter for Machining Light Alloy D=250~315mm
HB 678-1979 Inserted sleeve type face milling cutter for processing light alloy D=80~200mm
HB 647-1992 Milling Cutter - Cylindrical Milling Cutter for Machining Light Alloy D=50~100mm
HB 695-1992 Milling Cutter - Tipped Three-edge Milling Cutter Machining Light Alloy D=80~180mm
HB 677-1992 Milling Cutter - Welded Hard Alloy Screw Blade Shell End Milling Cutter Machining Light Alloy D=50~125mm
HB 2361-1977 Machine and hand taps d=4~7mm for processing light alloy non-through hole HB 241-75 thread
HB 3860-1986 Morse Taper Shank Welded Hard Alloy Helical Milling Cutter Used for Machining Light Alloy
HB 4589-1992 Cutter with Oblique Back Used for Two-tooth End Milling Cutter for Machining Light Alloy D=56~63mm
HB 2360-1977 Machine and hand taps d=1~3.5mm for machining light alloy non-through hole HB 241-75 thread
HB 3864-1986 Morse Taper Shank Welded Hard Alloy Helical Drill-end Milling Cutter Used for Machining Light Alloy
HB 3500-1985 Taper shank conical countersink drill with embedded carbide blade for quenched steel machining Φ＝６０°、９０°
HB 4198-1989 Machine reamer of hard alloy with front and rear guiding parts for machining quenched steelｄ＝２５．７~４０ｍｍ
HB 2431-1979 Two-tooth straight shank end mill for processing light alloy D=14~20mm
HB 700-1979 Saw blade milling cutter for processing light alloy D=63~200mm
HB 4199-1989 Total shell machine reamer of hard alloy for machining quenched steelｄ＝37．7~80ｍｍ
HB 3866-1986 7:24 Taper Shank Welded Hard Alloy Helical Drill-end Milling Cutter Used for Machining Light Alloy
HB 692-1979 D=63~100mm for machining light alloy with staggered teeth and three sides edge milling cutter
HB 679-1979 D = 100~200mm for inserting sleeve type face milling cutter for welding carbide inserts for processing light alloys
HB 723-1992 Milling Cutter - Cutter Tooth Used for Tipped Sleeve Facing Type Cutter with Welding Cemented Carbide Blade for Machining Light Alloy
HB 3868-1986 Technical Conditions for Helical Milling Cutter with Welded Hard Alloy for Machining Light Alloy
HB 3862-1986 7:24 Taper Shank Welded Hard Alloy Helical Milling Cutter Used for Machining Light Alloy
HB 725-1992 Milling Cutter - High Speed Steel Cutter Tooth for Manufacturing Light Alloy Toothed Double-edged and Three-edged Milling Cutter

Professional Standard - Aerospace

QJ 2625.1-1994 Solid Carbide End Mill for Processing High Strength Steel
QJ 2626A-2005 Carbide facemilling cutter with indexable for cutting high-tensile steel
QJ 2625.2-1994 Technical Specification for Solid Carbide End Mill for Machining High Strength Steel
QJ 2626.2-1994 Specifications for carbide indexable face milling cutters for machining high-strength steel
QJ 2626.1-1994 Carbide indexable face milling cutter for machining high-strength steel

未注明发布机构

PPP-D-711E-1975 Metal Marine Steel Lightweight Drum (55 Gallon)

Professional Standard - Non-ferrous Metal

YS/T 295-1994 Hard metal (carbide) for construction material drilling tools
YS/T 295-2024 Cemented carbide for construction material drilling tools

Group Standards of the People's Republic of China

T/GDRA 011-2023 Technical requirements for robot polishing workstation of die-castings
T/CSCS 22-2022 Carbide cutting tools for gear hole machining

Guizhou Provincial Standard of the People's Republic of China

DB52/T 992-2015 Solid Carbide NC End Mill for Machining Titanium Alloy

Gosstandart of Russia

GOST 21585-1976 Shell carbide-tipped countersinks for machining parts from light alloys. Design and dimensions
GOST 21583-1976 Tapered carbide-tipped countersinks for machining parts from lignt alloys. Design and dimensions
GOST 19547-1974 Lengthened twist drills with taper shank for working of light alloys. Design
GOST 19269-1973 Carbide tipped straight machine reamers with cylindrical shank for working details of light alloys. Design and dimensions
GOST 16223-1981 Shell end milling cutters with inserted carbide blades for machining light alloys. Types and dimensions
GOST 19546-1974 Twist drills with taper shank for working of light alloys. Design
GOST 16224-1981 Wedge shaped ribbed blades with carbide tirs for shell end milling cutters for machining light alloys. Design and dimensions
GOST 19548-1988 Twist drills for machining light alloys. Specifications
GOST 21542-1976 Carbide tipped counterbores for machining stainless and high-temperature steels and alloys. Specifications
GOST 20392-1974 Machine shell reamers with inserted high-speed blades for light alloys. Design and dimensions
GOST 19544-1974 Twist drills with cylindrical shank for working of light alloys. Long series. Design
GOST 16229-1981 Double angle disk cutter with inserted blades for machining light alloys. Design and dimensions
GOST 21545-1976 Solid carbide counterbores for machining stainless and high-temperature steels and alloys. Specifications
GOST 21729-1976 Cold-deformed and hot-deformed structural carbon and alloyed steel tubes. Specifications
GOST 21528-1976 Solid carbide reamers for machining corrosion-proof and heat-resisting steels and alloys. Technical requirements
GOST 21540-1976 Carbide tipped counterbores for machining stainless and high-temperature steels and alloys. Design and dimensions
GOST 16222-1981 Shell end milling cutters for machining light alloys. Design and dimensions
GOST 17930-1972 Machine taps with shortened flutes for machining of light alloys. Design and dimensions
GOST 19543-1974 Twist drills with cylindrical shank for working of light alloys. Middle series. Design
GOST 16225-1981 Shank cutters for machining light alloys. Types and dimensions
GOST 21541-1976 Carbide tipped inserted brade counterbores for machining stainless and high-temperature steels and alloys. Design and dimensions
GOST 23249-1978 End cutters for use on NC machine tools for machining parts of high-resistant steels, titanium and light alloys. Specifications
GOST 21544-1976 Solid carbide tipped counterbores with conical shank for machining stainless and high-temperature steels and alloys. Design and dimensions
GOST 17932-1972 Machine taps with screw flutes for light alloys. Design and dimensions
GOST 16230-1981 Cut off cutters for machining light alloys. Desigt and dimensions
GOST R 50347.2-1992 Dental rotary instruments. Part 2. Steel and carbide finishing bores
GOST 21527-1976 Solid carbide tipped machine shell reamers with inserted blades for machining parts from stainless and hightemperature steels and alloys. Design and dimensions
GOST 16227-1981 Three angle disk cutters for machining light alloys. Design and dimensions
GOST 21543-1976 Solid carbide counterbores with cylindrical shank for machining stainless and high-temperature steels and alloys. Design and dimensions
GOST 19272-1973 Cylindrical finishing lapped reamers for cultivation defails of light alloys. Allowances on diameters
GOST 21584-1976 Shell countersinks for machining parts from light alloys. Design and dimensions
GOST 21586-1976 Countersinks for machining holes diameters from 3 to 80 mm. Hole tolerance
GOST 23247-1978 End cutters for use on NC machine tools for machining parts of light alloys. Design
GOST 21579-1976 Cylinder-chucking countersinks for machining parts from light alloys. Design and dimensions
GOST 19545-1974 Left twist drills with cylindrical shank for working of light alloys. Design
GOST 17928-1972 Machine taps with staggered tooths for machining of light alloys. Design and dimensions
GOST 21581-1976 Tapered countersinks for machining parts for light alloys. Design and dimensions
GOST 19268-1973 Straight machine reamers with tapered shank for working parts of light alloys. Design and dimensions
GOST 21580-1976 End countersinks with cylinder chucking for machining parts from light alloys. Design and dimensions
GOST 21582-1976 End countersinks with taper chucking for machining parts from light alloys. Design and dimensions

IT-UNI

UNI 7730-1977 High quality non-alloy steel pin grooves for machining
UNI 4249-1959 General purpose wind steel single-edged cutter, finishing straight-point carbide file
UNI 6102-1977 High quality non-alloy steel unprocessed rims. Used for railway traction vehicle wheel sets. Quality, regulations and testing

Ente Nazionale Italiano di Unificazione

UNI 3820:1956 Finished drawn primary aluminium and light aluminium alloy hexagonal bar, with tolerance h 11.
UNI 7730:1977 Hollow unalloyed quality steel bars for machining.
UNI EN 23134-3:1992 Light metals and their alloys. Terms and definition. Wrought products.
UNI EN 23134-2:1992 Light metals and their alloys. Terms and definitions. Unwrought products.
UNI 4196:1959 Aluminum and light aluminum alloy sheets for work hardening. Dimensions. Weights
UNI EN 10294-1:2006 Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels

International Organization for Standardization (ISO)

ISO 8644:2006 Motorcycles - Light-alloy wheels - Test method
ISO 3134-3:1985/Amd 1:1989 Light metals and their alloys - Terms and definitions - Part 3: Processed products
ISO 3134-2:1985/Amd 1:1989 Light metals and their alloys - Terms and definitions - Part 2: Unprocessed products
ISO 3134-5:1981 Light metals and their alloys; Terms and definitions; Part 5 : Methods of processing and treatment

Spanish Association for Standardization (UNE)

UNE 38-040-1986 Semi-processed products of light metals and their alloys. Terms and definitions
UNE 38 003 Identification color of light alloy
UNE-EN 10341:2008 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
AENOR UNE-EN 10341:2008 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state
UNE 38-001-1985 Classification and designation of lightweight alloys
UNE 16164:1982 CARBIDE TIPS FOR THREADING.
AENOR UNE 26128:1957 THREADED BUSHINGS FOR THROUGH HOLES IN LIGHTWEIGHT ALLOYS
UNE-EN 10165:1996 COLD ROLLED ELECTRICAL ALLOYED STEEL SHEET AND STRIP DELIVERED IN THE SEMI-PROCESSED STATE.
UNE 38-002-1991 Definition and assignment of degrees of treatment for lightweight alloys
AENOR UNE-EN ISO 683-2:2019 Steels for heat treatment, alloy steels and easily machined steels. Part 2: Alloy steels for quenching and tempering. (ISO 683-2:2016).
AENOR UNE-EN 10294-1:2008 Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels

Korean Agency for Technology and Standards (KATS)

KS D 3561-2024 Cold finished carbon and alloy steel bar
KS D 3561-2007 Cold finished carbon and alloy steel bar
KS D 3561-2014 Cold finished carbon and alloy steel bar
KS D ISO 3134-2:2002 Light metals and their alloys-Terms and definitions-Part 2 : Unwrought products
KS D ISO 3134-5-2002(2012) Light metals and their alloys－Terms and definitions－Part 5 : Methods of processing and treatment
KS D ISO 3134-5:2013 Light metals and their alloys－Terms and definitions－Part 5 : Methods of processing and treatment
KS D ISO 3134-5:2002 Light metals and their alloys-Terms and definitions-Part 5 : Methods of processing and treatment

Japanese Industrial Standards Committee (JISC)

JIS G 3123:1987 Cold finished carbon and alloy steel bars

Building Officials and Code Administrators International(U.S.)

BOCA ARTICLE 19 NBC-1990 Lightweight Metal Alloys Eleventh Edition

Lithuanian Standards Office

LST EN 10341-2006 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state

German Institute for Standardization

DIN 1688-3 Light metal alloy raw castings; gravity die castings; general tolerances, machining allowances
DIN 1688-3:1980 Light metal alloy raw castings; gravity die castings; general tolerances, machining allowances
DIN EN 10341:2006-08 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state; German version EN 10341:2006
DIN 1688-4:1986-08 Light metal alloy raw castings; pressure die castings; general tolerances, machining allowances
DIN 4974:1980-10 Internal side turning tools for corner work with carbide tips
DIN 4990:1972 Cemented Carbide Cutting Application Group
DIN 4966:1961 Carbide tips for light cutting operations
DIN 1688-3:1980-10 Light metal alloy raw castings; gravity die castings; general tolerances, machining allowances
DIN 58727-1:1973-11 Surfacing pins for optics processing machines, without ball point cemented metal carbide
DIN 4219-2:1979 Lightweight concrete and reinforced lightweight concrete (closed structure) design and construction
DIN EN 10294-1:2005-12 Hollow bars for machining - Technical delivery conditions - Part 1: Non alloy and alloy steels; German version EN 10294-1:2005

Danish Standards Foundation

DS/EN 10341:2006 Cold rolled electrical non-alloy and alloy steel sheet and strip delivered in the semi-processed state

The American Road & Transportation Builders Association

AASHTO M 169-2015 Standard Specification for Steel Bars, Carbon and Alloy, Cold-Finished
AASHTO M 169-2020 Standard Specification for Steel Bars, Carbon and Alloy, Cold-Finished
AASHTO M 169-2006 Standard Specification for Steel Bars, Carbon, and Alloy, Cold-Finished

Association of German Mechanical Engineers

DVS 0955-1999 Welding processing of nickel alloy steel for low temperature use

Society of Automotive Engineers (SAE)

SAE AMS2452 Superfinishing of HVOF Applied Tungsten Carbide Coatings

American Society for Testing and Materials (ASTM)

ASTM A331-95(2000) Standard Specification for Steel Bars, Alloy, Cold-Finished
ASTM A108-03 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A108-03e1 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A108-13 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A108-07 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A108-24 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
ASTM A458-88 Specification for Hot-Worked, Hot-Cold-Worked, and Cold-Worked Alloy Steel Bars for High Strength at Elevated Temperatures

GCC Standardization Organization

GSO ISO 3134-3:2015 Light metals and their alloys -- Terms and definitions -- Part 3: Wrought products

British Standards Institution (BSI)

BS PD 970:2001 Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels
PD 970:2005 Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels
BS EN 10165:1996(1999) Cold Rolled Electrical Alloyed Steel Sheet and Strip Delivered in the Semi-Processed State
BS EN 10126:1996(1999) Cold Rolled Electrical Non-Alloyed Steel Sheet and Strip Delivered in the Semi-Processed State
BS EN 10126:1996 Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state

TH-TISI

TIS 1510-1998 Autoclaved aerated reinforced lightweight concrete panels

AT-ON

ONORM EN 23823-2-1991 Dental rotary instruments - Steel and carbide finishing burs

AASHTO - American Association of State Highway and Transportation Officials

M 169-2015 Standard Specification for Steel Bars@ Carbon and Alloy@ Cold-Finished
M 169-2009 Standard Specification for Steel Bars@ Carbon and Alloy@ Cold-Finished
M 169-2006 Standard Specification for Steel Bars@ Carbon@ and Alloy@ Cold-Finished

European Committee for Standardization (CEN)

EN 10165:1995 Cold Rolled Electrical Alloyed Steel Sheet and Strip Delivered in the Semi-Processed State
EN 10126:1995 Cold Rolled Electrical Non-Alloyed Steel Sheet and Strip Delivered in the Semi-Processed State

BE-NBN

NBN-EN 23134-2-1992 Light metals and their alloys. Terms and definitions. Part 2: Raw Form

Association Francaise de Normalisation

NF C28-926:1996 Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state.
NF A37-402:1983 Iron and steel. Colour marking of the main non alloy and low alloy, cold-sized free-cutting steel grades.
NF C28-925:1996 Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state.
NF A03-655:1986 Iron and steel. Free-cutting steels and structural steel. Method of control of machinability by turning using sintered metallic carbide cutting tools.

Standards Norway

NS-EN 10165:1995 Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed state
NS-EN 10126:1995 Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed state

ES-AENOR

INTA 12 38 13 Light alloy forged aluminum aluminum manganese. 1,2 steel plates and steel bars
INTA 12 38 23 Light alloy forged aluminum of aluminum, manganese, magnesium. 1,2 steel plates and steel bars
INTA 12 31 44 Aluminum light alloy forged aluminum, copper, magnesium 4.5 steel plates and steel bars
INTA 12 31 24 Aluminum light alloy forged aluminum, copper, magnesium 4.2 steel plates and steel bars

Magyar Szabványügyi Testület

MSZ 5738-1986 Common technical products for manufacturing work, made of unalloyed and slightly alloyed steel

Canadian Standards Association (CSA)

CAN/CSA-Z349.51.2-1994 Dental Rotary Instruments - Part 2: Steel and Carbide Finishing Burs

RO-ASRO

STAS 10417-1975 Tests of metals SIMPLE BEND TEST FOR LIGHT METAL AND LIGHT METAL ALLOY SHEETS AND STRIPS

AIA/NAS - Aerospace Industries Association of America Inc.

NA0148-2011 INSERT@ SCREW THREAD@ KEY LOCKED@ ALLOY STEEL@ LIGHTWEIGHT@ METRIC (Rev 2)

SE-SIS

SIS SMS 1769-1960 Corner Steel Type 136 in Carbide Tools
SIS SS-EN 23 134-3-1992 Light metals and their alloys — Terms and definitions — Part 3: Wrought products (ISO 3134-3:1985)
SIS SS-EN 23 134-2-1992 Light metals and their alloys — Terms and definitions — Part 2: Unwrought products (ISO 3134-2:1985)

CZ-CSN

CSN 69 0011-1982 Pressure vessels. Requirements or forgings and pressed work f alloy and non-alloy steels

PL-PKN

PN M69013-1965 Gas welding of mild carbon and Iow alloy steels. Weld grooves

FI-SFS

SFS 3327-1979 welding. Powder additives to unalloyed, precision alloyed and fine grained steels. Quality requirements and testing

SCC

AFS OS1101 Metallurgy and Processing of High-Integrity Light Metal Pressure Castings

NL-NEN

NEN-ISO 3134-3:1993 Light metals and their alloys. Terms and definitions. Part 3: Wrought products (ISO 3134-3:1985)
NEN-ISO 3134-2:1993 Light metals and their alloys. Terms and definitions. Part 2: Unwrought products (ISO 3134-2:1985)

U.S. Military Regulations and Norms

ARMY QPL-684-18-1983 CUPS, BULLET JACKET, COPPER ALLOY CLAD STEEL; FOR SMALL ARMS AMMUNITION

Others: Machining of light alloy steel