JT/T 1287-2020 in English
VALIDTechnical requirements for container transportation of passenger cars
- Issued on:2020-02-28
- Implemented on:2020-04-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$146.00
本标准规定了乘用车集装箱运输的装/卸载场地、人员及着装、运输装备、装载、运输过程、卸载等技术要求。
本标准适用于采用ISO通用集装箱、乘用车运输专用集装箱、集装箱与乘用车运输架组合的乘用车多式联运。
Introduction
Analysis of the core content of the standard
JT/T 1287-2020 systematically standardizes for the first time the technical requirements for multimodal transport of passenger cars through ISO general containers, special containers for passenger car transport and their combination. The standard highlights three major innovations:
- Equipment standardization: clarify key technical parameters such as the transport rack rated load ≥ 20kN and the breaking force of the lashing belt ≥ 20kN
- Operation process standardization: establish a standardized process for 9 major links from site selection to unloading inspection
- Safety systematization: build a three-dimensional safety assurance mechanism of personnel protection-equipment detection-process monitoring
Comparison of key technical requirements
| Project | ISO general container | Special container | Transport rack combination |
|---|---|---|---|
| Carrying capacity | In accordance with GB/T 5338 | Every 4m≥20kN | Rated load ≥ 20kN |
| Loading efficiency | Basic type | Increase by 30-50% | Flexible adaptation |
| Safety gap | ≥60mm (distance between vehicle body and equipment) | ||
Typical application scenarios
Case: An automobile company’s export project uses 1AAA special container with external transport rack to achieve:
- The loading capacity of a single box is increased from 4 to 8
- Loading and unloading time is reduced by 40%
- Transport damage rate is reduced to below 0.2%
Implementation suggestions
Equipment selection
Give priority to special containers with integrated load-bearing devices, whose non-slip floors and adjustable shelves can significantly improve operational safety.
Staff training
Key training needs:
- Safe operation of transport rack lifting (including the use of anti-fall devices)
- New lashing belt tension detection method
- IoT device linkage operation
Technological innovation
Suggested deployment at the loading and unloading site:
- AR visual guidance system
- Intelligent fastening force monitoring device
- Automatic positioning technology for transport racks
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
