NB/T 20008.15-2012 in English
VALIDOther Material for Pressurized Water Reactor Nuclear Power Plants - Part 15: Titanium Plate for Use in the Fabrication of Class 3 Heat Exchanger Plates
- Issued on:2012-01-06
- Implemented on:2012-04-06
- File Format:PDF
- Delivery:Via email within 1~3 business days
$175.00
Scope
This part specifies the technical requirements for manufacturing, chemical composition, mechanical properties, testing and inspection of titanium plates with a thickness of less than or equal to 1.5mm. This section applies to deep-drawing titanium plates with a maximum thickness of 1.5mm for 3-stage plate heat exchangers in pressurized water reactor nuclear power plants.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
NB/T 42052-2015 in English
Specification for small hydropower unit starting test
2015-04-02 -
NB/T 47018.4-2022 in English
Technical conditions for ordering welding materials for pressure equipment - Part 4: Submerged arc welding wire and flux
2022-11-04 -
NB/T 10496-2021 in English
Technical Code for Energy Conservation Construction of Hydropower Projects
2021-01-07 -
NB/T 47004.1-2017 in English
Plate heat exchangers-Part 1:Plate-and-frame heat exchangers
2017-12-27 -
NB/T 20202-2013 in English
Test Specifications for Atmospheric Diffusion of Nuclear Power Plants
2013-06-08 -
NB/SH/T 0812-2010 in English
Mineral Insulating Oils - Method for the Determination of 2-Furfural and Related Compounds
2010-05-01 -
NB/T 10500-2021 in English
Series parameters for QP wire rope hoists
2021-01-07 -
NB/T 10094-2018 in English
Energy regulators
2018-10-29 -
NB/T 25074-2017 in English
Specification for impeller of concrete volute circulating water pump of nuclear power plant
2017-02-10 -
NB/T 14002.4-2022 in English
Shale gas—Reservoir Stimulation—Part 4: Recommended practice specification of pump-down plug setting and perforating operation in horizontal well
2022-11-04
