nb/t20125-2012

nb/t20125-2012, Total:251 items.

The international standard classification for "nb/t20125-2012" includes: Non-destructive testing of metals , Wires , Other standards related to nuclear energy .

The Chinese standard classification for "nb/t20125-2012" includes: Metal nondestructive testing method , Bare wire , Environmental radiation protection and nuclear medicine protection .

Professional Standard - Energy

NB/T 20148-2012 Resistance Temperature Detectors Important to Safety in Nuclear Power Plants
NB/T 34010-2012 Test Method for Biomass Cooking and Radiant Heating Stoves
NB/T 20175-2012 Technical Specification for Installation and Acceptance of Fuel Handling and Storage System of PWR Nuclear Power Plants
NB/T 20112-2012 Technical Regulation of the Cable Terminal Connection in the Reactor Building for PWR Nuclear Power Plant
NB/T 20185-2012 Design Criterion of Radiation Zoning Inside of the PWR Nuclear Power Plant
NB/T 25009-2012 Energy Statistics Procedure in Pressurized Water Nuclear Power Plants
NB/T 20101-2012 Analysis Requirement for Rod Ejection Accidents of Pressurized Water Reactor Nuclear Power Plants
NB/T 20194-2012 Design Criterion of Radiation Shield in the PWR Nuclear Power Plant
NB/T 20084-2012 Qualification Procedure for Safety Class Residual Heat Removal Motor Applied in Nuclear Power Plants
NB/T 20104-2012 Analysis Requirement for Anticipated Transient without Scram on Pressurized Water Reactor Nuclear Power Plants
NB/T 34007-2012 General Specification for Biomass Cooking and Heating Stoves
NB/T 31026-2012 Electric Design Code for Windpower Projects
NB/T 20008.5-2012 Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 5: Class 1 and 2 Hot Rolled Nickel-Chromium-Iron Alloy Plates
NB/T 47013.8-2012 Nondestructive testing of pressure equipments - Part 8: Leak Testing
NB/T 20173-2012 Technical Specification for Installation and Test of Ring Crane in Reactor Building of PWR Nuclear Power Plants
NB/T 1004-2012 Methods for Preparation of Preliminary Design Budgetary Estimation of Underground Oil Storage in Rock Caverns Project of National Oil Strategic Reserve (Provisional)
NB/T 20006.7-2012 Alloy Steel for Pressurized Water Reactor Nuclear Power Plants - Part 7: Mn-Ni-Mo Steel Forgings for Steam Generator Shells
NB/T 20007.26-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 26: Austenitic-ferritic Stainless Steel Centrifugally Cast Pipes for Reactor Coolant Piping
NB/T 47013.9-2012 Nondestructive testing of pressure equipments - Part 9: Acoustic emission testing
NB/T 20184-2012 General Specification on Transport Vessel for Fresh Fuel Assembly of PWR Nuclear Power Plants
NB/T 31035-2012 Flexible and Torsion Resistant Cables of Rated Voltages up to and Including 1.8/3kV for Wind Turbine – Part 2: Cables for Rated Voltage of 1.8/3kV
NB/T 20117-2012 Prescriptions of Safety Management for Construction of Nuclear Power Project
NB/T 47023-2012 Welding neck flange
NB/T 51006-2012 Technical Specifications of Gas Pre-drainage and Eliminating Outburst Effect Assessment
NB/T 20113-2012 Technical Regulation for Construction of HVAC Installation in PWR Nuclear Power Plant
NB/T 31041-2012 Converter of Offshore Doubly-fed Wind Turbine Generator
NB/T 20156-2012 Requirement for Compilation and Optimization for Preventive Maintenance Program at Nuclear Power Plants
NB/T 20008.3-2012 Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 3: Class 3 Copper-aluminium Alloy Castings for Auxiliary System Pumps and Valves
NB/T 20133.5-2012 Specifications for Protective Coatings Used in Pressurized Water Reactor Nuclear Power Plants - Part 5: Standard Test Method for Chemical Resistance
NB/T 20137-2012 Regulation for Staff Training of Radiation Protection in Nuclear Power Plants
NB/T 20067-2012 Identification for Safety Class Equipment in Nuclear Power Plants
NB/T 20006.13-2012 Alloy Steel for Pressurized Water Reactor Nuclear Power Plants - Part 13: Alloy Steel Forgings for Reactor Coolant Pump Motor Shaft Assembles
NB/T 20170-2012 Qualification Procedure of Safety Class Diesel-generator Units for Nuclear Power Plants
NB/T 20087-2012 Aging Management Guidance for Instrument and Control Cables Important to Safety for Nuclear Power Plants
NB/T 20005.13-2012 Carbon Steel and Low Alloy Steel for Pressurized Water Reactor Nuclear Power Plants - Part 13: Seamless Drawn Carbon Steel Tubes for Classes 2 and 3 Heat Exchangers
NB/T 31027-2012 Code for Preparation of Safety Assessment Report Upon Completion of Wind Power Projects
NB/T 20080-2012 Qualification of Class 1E Lead Storage Batteries for Nuclear Power Plants
NB/T 20008.4-2012 Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 4: Forged or Rolled Classes 1, 2 and 3 Nickel-Chromium-Iron Alloy Parts
NB/T 31034-2012 Flexible and Torsion Resistant Cables of Rated Voltages up to and Including 1.8/3kV for Wind Turbine - Part 1: Cables for Rated Voltages up to and Including 0.6/1kV
NB/T 34008-2012 Test Method for Biomass Cooking and Heating Stoves
NB/T 20007.15-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants. Part 15: Strain Hardened Hot Worked Rolled or Forged Bars Made from Anstenitic Stainless Steel Used for the Fabrication of Bolting Material for Reactor Internals
NB/T 20099-2012 Analysis Demand for Loss-of-coolant Accident of Pressurized Water Reactor Nuclear Power Plants
NB/T 20107-2012 Technical Regulation for Construction of Reactor Coolant Pump Installation in PWR Nuclear Power Plant
NB/T 20119-2012 Material Item Management Requirements for Nuclear Power Engineering
NB/T 31040-2012 Surge Protective Devices with Integral Short Circuit Protection Function
NB/T 20120-2012 Management Provision for the Technology of Nuclear Power Engineering Construction
NB/T 20008.6-2012 Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 6: Hot Rolled Nickel-Chromium-Iron Alloy Plates
NB/T 51007-2012 Technical Specifications of Integrated Pillarless Coal Production and Methane Extraction
NB/T 20135-2012 General Guidelines for Reliability Data Exchange of Nuclear Power Plants
NB/T 20082-2012 Qualification Procedure for Safety-class Diesel-generator Applied as Standby Power Supplies for Nuclear Power Plants
NB/T 20150-2012 Characteristics and Test Methods of Self-powered Neutron Detectors for Nuclear Power Plants
NB/T 20178-2012 Design Criteria of Nuclear Sampling System of Pressurized Water Reactor Nuclear Power Plant
NB/T 20179-2012 Design Criteria for Compressed Air System of Nuclear Power Plant
NB/T 20098-2012 Design Criteria for Containment Hydrogen Control System of Pressurized Water Reactor Nuclear Power Plants
NB/T 20165-2012 Qualification Procedure for Residual Heat Removal Pump of Pressurized Water Reactor Nuclear Power Plant
NB/T 20122-2012 Checking-and-acceptance Management Provision for the Quality and the Hand-over of Nuclear Power Engineering Construction
NB/T 31032-2012 Code for Preparation of Offshore Wind Power Projects Feasibility Study Report
NB/T 20075-2012 Protection Provided by Electrical Equipment Against External Impact for Nuclear Power Plants
NB/T 20074-2012 Qualification of Class 1E Motor Control Centers for Nuclear Power Plants
NB/T 20189-2012 Interface Design Criteria Concerning Nuclear Steam Supply System and Turbine Building of Pressured Water Reactor Nuclear Power Plant
NB/T 20007.18-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 18: Rolled or Forged Martensitic Stainless Steel Parts for Classes 2 and 3 Auxiliary Pump Drive Shafts
NB/T 20149-2012 Qualification Procedure for Pressure Transmitter Important to Safety of Nuclear Power Plants
NB/T 20133.2-2012 Specifications for Protective Coatings Used in Pressurized Water Reactor Nuclear Power Plants. Part 2: Standard Test Method for Evaluating Coatings at Simulated Design Basis Accident (DBA) Conditions
NB/T 20174-2012 Technical Specification for Onsite Manufacture and Acceptance of Carbon Steel & Stainless Steel Tanks of PWR Nuclear Island
NB/T 20180-2012 Design Criteria for Compressed Air Supplying System of Nuclear Island in Nuclear Power Plant
NB/T 20066-2012 The Design Criteria for Nuclear Power Plants Station Blackout
NB/T 20171-2012 Qualification Procedure for Safety Class 3 Pump of Pressurized Water Reactor Nuclear Power Plant
NB/T 20057.4-2012 PWR Nuclear Power Plants Reactor System Design - Core - Part 4: Core Components
NB/T 20110-2012 Technical Regulation for Installation of PWR Nuclear Power Auxiliary System Equipment
NB/T 20005.16-2012 Carbon Steel and Low Alloy Steel for Pressurized Water Reactor Nuclear Power Plants - Part 16: Elbow for Main Steam System
NB/T 47024-2012 Nonmetallic gaskets
NB/T 20133.1-2012 Specifications for Protective Coatings Used in Pressurized Water Reactor Nuclear Power Plants - Part 1: General Requirements
NB/T 20167-2012 Qualification Procedure for Isolation Valve of Pressurized Water Reactor Nuclear Power Plants
NB/T 20086-2012 Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Plants
NB/T 20076-2012 Earthquake Instrumentation Criteria for Nuclear Power Plants
NB/T 20037.2-2012 Probabilistic Safety Assessment for Nuclear Power Plant Applications - Part 2: Level 1 PSA for Internal Events At-low Power and Shutdown
NB/T 20132-2012 Design Requirements of Personnel Airlock for Containment in Pressurized Water Reactor Nuclear Power Plants
NB/T 20136-2012 Design Criterion for Radiation Controlled Area Access of Nuclear Power Plants
NB/T 20158-2012 Specification for Volute Concrete Construct of Circulating Water Pump of Pressurized Water Reactors Nuclear Power Plants
NB/T 20039.8-2012 Code on Nuclear Air and Gas Treatment - Ventilation, Air Conditioning and Air Cleaning - Part 8: Medium Efficiency Air Filters
NB/T 51003-2012 Design Specifications of Coal Face of Gas Comprehensive Treatment
NB/T 20007.6-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 6: Controlled Nitrogen Content Austenitic Stainless Steel Plate for Reactor Internal
NB/T 20081-2012 Qualification Procedure for Class 1E Transformer Applied in Pressurized Water Reactor Nuclear Power Plants
NB/T 31042-2012 Converter of Offshore Permanent Magnet Wind Turbine Generator
NB/T 31022-2012 Code for Acceptance of Wind Power Engineering Reaching the Standard and Putting
NB/T 20037.3-2012 Probabilistic Safety Assessment for Nuclear Power Plant Applications - Part 3: Flooding
NB/T 20039.13-2012 Code on Nuclear Air and Gas Treatment - Ventilation, Air Conditioning and Air Cleaning - Part 13: Iodine Absorber (Type III)
NB/T 20007.4-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 4: Niobium Stabilized Austenitic Stainless Steel Forgings for the Shafts of Reactor Coolant Pumps
NB/T 20118-2012 Regulation for Fire Protection for Nuclear Power Plants Construction
NB/T 20008.9-2012 Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 9: Hot Rolled or Hot Extruded Nickel-Chromium-Iron Alloy Bars
NB/T 20181-2012 Technical Specification of Radiation Environmental Impact Assessment for Airborne Radioactive Effluents of Nuclear Power Plant on Operational States
NB/T 51005-2012 Design Compiling Specifications of Coal Uncovering in Mine Passageway
NB/T 31037-2012 Low-voltage Switchgear and Control gear Assemblies for Wind Power Generation
NB/T 20057.3-2012 PWR Nuclear Power Plants Reactor System Design - Core - Part 3: Fuel Assembly
NB/T 1002-2012 Guides for Preparation of Preliminary Design of Underground Oil Storage in Rock Caverns Project of National Oil Strategic Reserve (Provisional)
NB/T 20146-2012 Design Standard of Automatic Fire Alarm System of Nuclear Power Plants
NB/T 20121-2012 The Regulation for Editing Construction Organization Plan of Nuclear Power Project
NB/T 20105-2012 Load Code for the Design of Nuclear Power Plants Building Structures
NB/T 20071-2012 Requirements for Electrical Supplies of Instrumentation and Control Systems Important to Safety in Nuclear Power Plants
NB/T 20085-2012 Qualification Procedure for Safety Class High-voltage Switchboard Applied in Nuclear Power Plants
NB/T 20138-2012/6250 Individual monitoring and workplace monitoring of nuclear power plant
NB/T 47020-2012 Type and Specification for Pressure Vessel Flanges
NB/T 20100-2012 Principles for Main Primary System and Main Steam System Overpressure Analysis of Pressurized Water Reactor Nuclear Power Plants
NB/T 20160-2012 The Technical Specification for Watertight Stainless Steel Liner of PWR Nuclear Power Plant
NB/T 20133.3-2012 Specifications for Protective Coatings Used in Pressurized Water Reactor Nuclear Power Plants - Part 3: Standard Test Method for Effects of Gamma Radiation
NB/T 20131-2012 Design Criteria for Emergency Core Cooling Sump of Pressurized Water Reactors Nuclear Power Plants
NB/T 20008.10-2012 Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 10: Ni-Cr-Fe Alloy Rolled Bars Used for Internal Support Pins and Bolting
NB/T 20007.2-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 2: Austenitic Stainless Steel Forgings for Classes 2 and 3 Tube Plates of Heat Exchanger
NB/T 20133.6-2012 Specifications for Protective Coatings Used in Pressurized Water Reactor Nuclear Power Plants - Part 6: Coating Operation
NB/T 20133.4-2012 Specifications for Protective Coatings Used in Pressurized Water Reactor Nuclear Power Plants - Part 4: Determination of the Decontaminability of Coatings
NB/T 1003-2012 Construction Code for Underground Oil Storage in Rock Caverns Project of National Oil Strategic Reserve (Provisional)
NB/T 31033-2012 Code for Construction Planning of Offshore Wind Power Projects
NB/T 20195-2012 Reactor Thermal Power Measurement Procedure for Reactor Core in Pressurized Water Nuclear Power Plant
NB/T 20069-2012 Performance Monitoring Test of Instrumentation Channels Important to Safety in Nuclear Power Plants
NB/T 31031-2012 Code for Preparation of Offshore Wind Power Projects Pre-feasibility Study Report
NB/T 20079-2012 Qualification Procedure for Safety-class Electric Actuators Applied in Nuclear Power Plants
NB/T 47029-2012 Aluminium and aluminium alloy forgings for pressure vessels
NB/T 20106-2012 Model Regulation of Cooling Water for Nuclear Power Plant
NB/T 51004-2012 Specifications for Compiling Geology Instructions of Coal Uncovering in Mine Passageway
NB/T 20125-2012 Construction Specification of the Foundation Grouting for PWR Safety Important Facility
NB/T 20005.3-2012 Carbon Steel and Low Alloy Steel for Pressurized Water Reactor Nuclear Power Plants - Part 3: Forgings for Classes 2, 3 Auxiliary Pump Shafts
NB/T 34011-2012 Specifications for Sewage Treatment Device of Biomass Gasification System
NB/T 20177-2012 Design Criteria for Component Cooling Water System of Pressurized Water Reactor Nuclear Power Plants
NB/T 32003-2012 Self-regulating Heating Cables for Solar Heat Application
NB/T 20111-2012 General Technical Regulation of Safety-related Valves Installation in PWR Nuclear Power Plant
NB/T 20166-2012 Qualification Procedure for Charging Pump of Pressurized Water Reactor Nuclear Power Plant
NB/T 20139-2012 Technical Criteria for Environmental Radioactivity Background Investigation for Nuclear Power Plant
NB/T 20153-2012 Ageing Management Guideline of Prestressed Concrete Containment in Nuclear Power Plants
NB/T 20142-2012 Guide for Chemical Decontamination of Primary Loop System and Components of PWR Nuclear Power Plants
NB/T 20077-2012 Criteria for the Handling and Initial Evaluation of Records from Nuclear Power Plants Seismic Instrumentation
NB/T 20090-2012 Requirements for preoperational tests of class 1E power systems in nuclear power plants
NB/T 20092-2012 Inspection Guide for the Moisture Separator Reheater of Pressurized Water Reactor Nuclear Power Plants
NB/T 20123-2012 Standard for Division of Sub-section and Sub-project in Construction of Nuclear Power Plant
NB/T 20147-2012 Criteria for Physical Protection Systems for Nuclear Power Plants
NB/T 20168-2012 Qualification Procedure for Check Valve of Pressurized Water Reactor Nuclear Power Plants
NB/T 20128-2012 Specifications on Construction and Acceptance of Nuclear Island Foundation Pit
NB/T 31025-2012 Ring Type Forgings of Wind Turbine Generator System
NB/T 20162-2012 Technical Requirements on the Cleaning Areas Establishment and Maintenance of PWR Nuclear Island Equipment During Storage, Installation and Start-up
NB/T 20155-2012 Aging Management on Class 1E Equipment Used in Nuclear Power Plants
NB/T 20065-2012 Installation and Arrangement Requirement for Transducer and Transmitter Important to Safety in Nuclear Power Plant
NB/T 20096-2012 Failure Mode and Effects Analysis for System of Nuclear Power Plants
NB/T 20005.4-2012 Carbon Steel and Low Alloy Steel for Pressurized Water Reactor Nuclear Power Plants. Part 4: the Forged or Rolled Parts for Use in Steam Generator Main Steam Systems
NB/T 20072-2012 Determination and Maintenance of Trip Setpoints for Instrumentation of Safety Systems in Nuclear Power Plants
NB/T 20144-2012 Initial Criticality Tests for Pressurized Water Reactor of Nuclear Power Plants
NB/T 20057.1-2012 Pressurized Water Reactor Nuclear Power Plants Reactor System Design - Core - Part 1: Nuclear Design
NB/T 20152-2012 Ageing Management Guideline of Piping in Nuclear Power Plants
NB/T 20140-2012 Technical Specification for Radiation Protection of Nuclear Power Plants Siting
NB/T 20183-2012 Compilation Guideline for Nuclear Power Plant Reliability Assurance Program
NB/T 20008.16-2012 Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 16: Cabolt-base Alloy for Control Rod Drive Mechanism
NB/T 31028-2012 Code for Preparation of Safety Pre-assessment Report of Wind Power Projects
NB/T 20060-2012 The Separation Criterion for Instrumentation and Control Systems Important to Safety in Nuclear Power Plants
NB/T 47027-2012 Stud bolts & nuts for body flange
NB/T 31029-2012 Specification of Wind Energy Resource Measurement and Marine Hydrographic Observation for Offshore Wind Power Projects
NB/T 20059-2012 The Operator Controls in Control Rooms of Nuclear Power Plants
NB/T 20097-2012 Concrete Containment Functional Design Requirements for PWR Nuclear Power Plant
NB/T 20169-2012 Qualification Procedure for Auxiliary Reed Water Turbine-driven Pump of Pressurized Water Reactor Nuclear Power Plant
NB/T 47021-2012 A-type socket-weld flange
NB/T 51002-2012 Methods for Solid-Filling Coal Mining with Comprehensive Mechanization
NB/T 20186-2012 Calculation of Doses to Public From Routine Releases of Reactor Radioactive Effluents
NB/T 20039.15-2012 Code on Nuclear Air and Gas Treatment - Ventilation, Air Conditioning and Air Cleaning - Part 15: Adsorbent Media
NB/T 47022-2012 B-type socket-weld flange
NB/T 20102-2012 Determination of Steady State Neutron Reaction Rate Distributions and Reactivity of Nuclear Reactors
NB/T 47028-2012 Nickel and nickel alloy forgings for pressure vessels
NB/T 20116-2012 The General Requirements of Information for Nuclear Power Plants Construction Project Management
NB/T 20068-2012 Requirements for Coping with Common Cause Failure (CCF) of Instrumentation and Control Systems Important to Safety in Nuclear Power Plants
NB/T 20009.8-2012 Welding Material for Pressurized Water Reactor Nuclear Power Plants - Part 8: Nickel-based Alloy Wires and Filler Rods for Classes 1, 2, 3 Components
NB/T 31024-2012 Hydraulic Disc Brake for Yawing of Wind Turbine Generator Systems
NB/T 20007.22-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants. Part 22: Seamless Pipes Made from Martensitic Stainless Steel for Drive Rods of Reactor Control Rod Drive Mechanisms
NB/T 32002-2012 Solar Lawn Light
NB/T 20091-2012 Inspection Guide for the Turbine of Pressurized Water Reactor Nuclear Power Plants
NB/T 20159-2012 The Construction Technical Specification for Liner of Reactor Building of PWR Nuclear Power Plant
NB/T 20058-2012 The Application of Visual Display Units in Control Rooms of Nuclear Power Plants
NB/T 20114-2012 The Technical Regulation of Pressurized Water Reactor CRDW Power Supply System Installation
NB/T 20007.16-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 16: Classes 2 and 3 Martensitic Stainless Steel Forgings
NB/T 47025-2012 Spiral wound gaskets
NB/T 20127-2012 Technical Requirements for Embedment Parts Manufacture and Installation of PWR Nuclear Power Plant
NB/T 20134-2012 Guidelines to Ensure Quality of Collected Data on Reliability of Nuclear Power Plants
NB/T 20088-2012 Requirements for the Replacement Parts and Components for Safety-class Equipment in Nuclear Power Plants
NB/T 20007.7-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 7: Austenitic Stainless Steel Plate and Strip for Classes S1 and S2 Supports
NB/T 20005.14-2012 Carbon Steel and Low Alloy Steel for Pressurized Water Reactor Nuclear Power Plants - Part 14: Classes 2 and 3 Butt-welding Seamless Fittings
NB/T 20164-2012 Qualification Procedure for Auxiliary Feed Water Motor-driven Pump of Pressurized Water Reactor Nuclear Power Plant
NB/T 20157-2012 Quality Assurance Requirements for Construction of Nuclear Power Project
NB/T 20109-2012 Technical Specification of Neutron Flux Guide Tube Installation in Reactor Building for PWR Nuclear Power Plant
NB/T 31043-2012 Technical Specification for Main Control System of Offshore Wind Turbine Generator System
NB/T 20151-2012 Guideline for Preparing Ageing Management Programme of Pressurized Water Reactor Nuclear Power Plants
NB/T 20172-2012 Norm for Measuring Datum Network Establish and Manage of Nuclear Power Projects
NB/T 31044-2012 Technical Specification for Permanent Magnet Wind Turbine Generator-converter Set
NB/T 31039-2012 Technical Specification for Lightning Protection System of Wind Turbine
NB/T 20005.11-2012 Carbon Steel and Low Alloy Steel for Pressurized Water Reactor Nuclear Power Plant - Part 11: Seamless Pipes for Classes S1 and S2 Supports
NB/T 20126-2012 Specifications for Construction and Acceptance of Caulking of PWR Nuclear Island Plant
NB/T 20062-2012 Batteries for Uninterruptible Power Supply Systems for Nuclear Power Plants
NB/T 20193-2012 Code for Design of Steam/Water Piping of Conventional Island in Nuclear Power Plants
NB/T 51008-2012 Determination of Thermal Environment and Evaluation Methods in Coal Mine
NB/T 20007.13-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 13: Forged Tubes and Elbows Made from Controlled Nitrogen Austenitic Stainless Steel for Reactor Coolant Piping
NB/T 42002-2012 Copper-clad Aluminum Bus Bars for Electrical Purposes
NB/T 20145-2012 Compiling Criteria of Commissioning Test Procedure and Report for Nuclear
NB/T 20141-2012 Packaging, Transportation, Loading & Unloading and Storage of Fresh Fuel Assembly for PWR Nuclear Power Plant
NB/T 20078-2012 Qualification Procedure for Safety-related Pneumatic Control Valve of Pressurized Water Reactor Nuclear Power Plants
NB/T 31023-2012 Hydraulic Caliper Disc Brake for Speed-shaft of Wind Turbine Generator Systems
NB/T 20073-2012 Criterion for Instrumentation and Control Equipment Grounding in Nuclear Power Plants
NB/T 20191-2012 Accessibility Criteria for In-service Inspections in Structural Design of Pressurized Water Reactor Nuclear Power Plants
NB/T 20094-2012 Containment Ventilation System of Pressurized Water Reactor Nuclear Power Plant
NB/T 20009.7-2012 Welding Material for Pressurized Water Reactor Nuclear Power Plants-Part 7: Stainless Steel Wires and Filler Rods for Classes 1, 2, 3 Components
NB/T 20161-2012 Installation and Commissioning Technical Guideline for Ex-core Neutron Flux Measuring System for Pressurized Water Reactor of Nuclear Power Plants
NB/T 20009.6-2012 Welding Material for Pressurized Water Reactor Nuclear Power Plants - Part 6: Carbon Steel Electrodes and Rods for Gas Shielded Arc Welding of Classes 1, 2, 3 Components
NB/T 20008.1-2012 Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 1: Alloy Steel Forgings for Use in Reactor Coolant System Supports
NB/T 20057.2-2012 Pressurized Water Reactor Nuclear Power Plants Reactor System Design - Core- Part 2: Thermal Hydraulic Design Criteria
NB/T 20063-2012 Glossary of Instrumentation and Control for Nuclear Power Plants
NB/T 20108-2012 Technical Regulation of Containment Penetration Installation in PWR Nuclear Power Plant
NB/T 20005.2-2012 Carbon Steel and Low Alloy Steel for Pressurized Water Reactor Nuclear Power Plants - Part 2: Forgings for Classes 2, 3 Heat Exchanger Tube Plates
NB/T 20192-2012 General Requirements for Pilot Operated Safety Valves of Pressurized Water Reactor Nuclear Power Plant
NB/T 20163-2012 Qualification Procedure for Containment Spray Pump and Low Head Safety Injection Pump of Pressurized Water Reactor Nuclear Power Plant
NB/T 47026-2012 Double-jacketed gaskets
NB/T 20061-2012 Practice for Application of Human Factors Engineering to Systems, Equipment and Facilities of Nuclear Power Plant
NB/T 20176-2012 Design Requirement for Hydrogen Supply Nitrogen Supply Oxygen Supply Carbon Dioxide Supply System of PWR Nuclear Power Plant
NB/T 20005.8-2012 Carbon Steel and Low Alloy Steel for PWR Nuclear Power Plant - Part 8: Steel Plates, Beams and Bars for Classes S1 and S2 Supports
NB/T 20143.1-2012 Code on Nuclear Air and Gas Treatment Process Gas Treatment - Part 1: Hydrogen Recombiner
NB/T 32001-2012 Technical Specification for Environmental Impact Assessment of Photovoltaic Power Station
NB/T 20064-2012 Installation and Test Requirement of In-core Instrumentation System in Pressured Water Reactor Nuclear Power Plant
NB/T 20070-2012 Criteria for Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits in Nuclear Power Plants
NB/T 20007.21-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 21: Martensitic Stainless Steel Plates for Use in Making Steam Generator Tube Support Plates
NB/T 20006.8-2012 Alloy Steel for Pressurized Water Reactor Nuclear Power Plants - Part 8: Mn-Ni-Mo Steel Forgings for Steam Generator Upper Heads
NB/T 20083-2012 Criteria for Lubricating Oil Systems Design for Emergency Diesel Generator of Nuclear Power Plants
NB/T 20103-2012 Accident Analysis and Safety Criteria for Pressurized Water Reactor Nuclear Power Plant
NB/T 31036-2012 Flexible and Torsion Resistant Cables of Rated Voltages up to and Including 1.8/3kV for Wind Turbine - Part 3: Methods for Torsion Test
NB/T 20129-2012 General Technical Regulation for Installation, Test and Acceptance of Emergency Diesel Generator of Nuclear Island in Pressurized Water Reactor Nuclear Power Plants
NB/T 47013.7-2012 Nondestructive testing of pressure equipments - Part 7: Visual examination
NB/T 31030-2012 Specifications for Engineering Geological Investigation of Wind Power Projects
NB/T 31021-2012 Specification for Scientific and Technological Records Filing and Arrangement of Wind Farm
NB/T 20130-2012 Concrete Radiation Shielding
NB/T 20190-2012 Noise Control for Production Buildings of Nuclear Power Plants
NB/T 20115-2012 Technical Regulation for Construction and Acceptance of Reactor Pressure Vessel Head Installation in PWR Nuclear Power Plants
NB/T 20007.3-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants. Part 3: Controlled Nitrogen Content Austenitic Stainless Steel Forgings for Core Upports and Upper Support Plates
NB/T 20089-2012 Standards Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Plants
NB/T 20093-2012 Qualification of Safety-related Valve Actuators for Nuclear Power Plants
NB/T 20039.3-2012 Code on Nuclear Air and Gas Treatment - Ventilation, Air Conditioning and Air Cleaning - Part 3: Ductwork
NB/T 20008.15-2012 Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 15: Titanium Plate for Use in the Fabrication of Class 3 Heat Exchanger Plates
NB/T 20095-2012 Design Criteria for HVAC Systems Located Outside Containment of PWR Nuclear Power Plant
NB/T 34009-2012 General Specification for Biomass Cooking and Radiant Heating Stoves
NB/T 20182-2012 Technical Specification for Radioactive Environmental Impact Assessment of Working Condition Airborne Radioactive Materials for Nuclear Power Plants
NB/T 20124-2012 Code for Acceptance of Construction of Biological Shielding Concrete of PWR Nuclear Power Plant
NB/T 20187-2012 Design Criteria for Reactor Coolant System in Pressurized Water Reactor Nuclear Power Plants
NB/T 20007.17-2012 Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 17: Martensitic Stainless Steel Forgings Used for Internal Hold Down Springs
NB/T 31038-2012 Low-voltage Reactive Power Compensation Assemblies for Wind Power Generation
NB/T 20154-2012 Guideline of Ageing Management for PWR Reactor Pressure Vessels
NB/T 20138-2012 Individual Monitoring and Workplace Monitoring of Nuclear Power Plant
NB/T 20006.5-2012 Alloy Steel for Pressurized Water Reactor Nuclear Power Plants - Part 5: Mn-Ni-Mo Steel Forgings for Reactor Pressure Vessel Heads
NB/T 20008.8-2012 Other Materials for Pressurized Water Reactor Nuclear Power Plants - Part 8: Hot Extruded Nickel-chromium-iron Alloy Pipes
NB/T 20188-2012 Design Criteria for Essential Service Water System for Pressurized Water Reactor Nuclear Power Plant
NB/T 20008.17-2012 Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 17: Classes 2 and 3 Unalloyed and Alloy Ductile Iron Castings

国家能源局

NB/T 42001.1-2012 The norm of energy consumption per unit product of thermal power equipment manufacturing enterprises. Part 1: Utility boiler