QC/T 792-2007 in English

1 Scope

This standard specifies the product model preparation, requirements, test methods, inspection rules and marking, packaging, transportation and storage requirements of motors (including motors with reducers) and controllers for electric motorcycles and electric mopeds.

This standard is applicable to motors for electric motorcycles and electric mopeds (hereinafter referred to as the “motors”) and their controllers.

2 Normative references

The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.

GB/T 191-2000 Packaging - Pictorial marking for handling of goods
GB 14023-2006 Vehicles, boats and internal combustion engines driven devices - Radio disturbance characteristics - Limits and methods of measurement
GB/T 2423.5 Environmental testing for electric and electronic products - Part 2: Test methods - Test Ea and guidance: Shock
GB/T 2423.10 Environmental testing for electric and electronic products－Part 2: Test methods - Test Fc and guidance: Vibration (sinusoidal)
GB/T 4942.1-2001 Classification of degrees of protection provided by enclosures of rotating electrical machines (IP code)
GB/T 4942.2-1993 Degrees of protection provided by enclosures for low-voltage apparatus
GB/T 5171-2002 General technical requirements for small power motors
GB/T 10069.1-2006 Measurement of airborne noise emitted by rotating electrical machines and the noise limits - Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 13202-1997 Series of motorcycle rims
GB/T 17619-1998 Limits and methods of testing for immunity of electrical/electronic sub-assemblies in vehicles to electromagnetic radiation
GB/T 18387 Limits and test methods of magnetic and electric field strength from electric vehicles - Broadband 9kHz～30MHz
QC/T 413-2002 Basic specifications for automotive electrical equipment

3 Terms and definitions

For the purposes of this standard, the following terms and definitions apply.

3.1
integrated wheel with the outer shell of motor
integrated motorcycle driving wheel made of the hub and the outer shell of the motor

Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Product model preparation
5 Requirements
6 Test method
7 Inspection rules
8 Marking, packaging, transportation and storage