Frames and accessories for motorcycles

Frames and accessories for motorcycles, Total:290 items.

The international standard classification for "Frames and accessories for motorcycles" includes: Motorcycles and mopeds , Internal combustion engines for road vehicles , Road vehicles in general , Commercial vehicles in general , Transport exhaust emissions , Magnesium and magnesium alloys , Lighting signalling and warning devices , Rolling bearings , Diagnostic, maintenance and test equipment , Road transport , Electrical equipment. Control systems , Road vehicle systems in general , Indicating and control devices , Road vehicle systems , Electrical and electronic equipment , Head protective equipment , Acid secondary cells and batteries .

The Chinese standard classification for "Frames and accessories for motorcycles" includes: Engine , Motorcycles in general , New energy vehicle and other automobiles , Discharge standard for mobile pollution sources , Electronic and electrical equipment , Casting , Lighting and signaling equipment , Rolling bearing , Highway vehicle utilization, maintenance and service , Bearing system , Transmission and braking system , Ignition device , Universal vehicle parts in general , Steering and operation system , Instruments and test devices for vehicle , Electronic/electrical equipment and instruments for vehicle in general , Engine body and moving parts , Police-used device and tool , Electrical energy storage device .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 4569-2005 Limit and measurement method of noise emitted by stationary Motorcycles and Mopeds
GB 17352-1998 Motorcycles and mopeds rear-view-mirrors requirement of performance and installation
GB 16169-2005 Limit and measurement method of noise emitted by accelerating Motorcycles and Mopeds
GB 20998-2007 Limits and measurement methods for evaporative pollutants from motorcycles and mopeds
GB 20073-2018 Performance and measurement method for braking of motorcycles and mopeds
GB/T 37338-2019 Instrumentation for electric motorcycles and mopeds
GB/T 25762-2010 Rolling bearings - Needle roller and cage assemblies for motorcycle connecting rod
GB/T 18189-2000 Requirements for industry of motorcycle maintenance and repair being managed
GB 14621-2011 Limits and measurement methods for exhaust pollutants from motorcycles and mopeds under two-speed idle conditions
GB 15744-2019 The limits and measurement methods of fuel consumption for motorcycles and mopeds
GB/T 15366-2025 Types, positions and general requirements for controls of motorcycles and mopeds
GB/T 5359.4-1994 Motorcycles and mopeds part and component designations for vehicle with two wheels
GB/T 5363-2025 Method of bench test of engine for motorcycles and mopeds
GB/T 18189-2008 Requirements for industry of motorcycle maintenance and repair being managed
GB/T 24157-2017 Test methods of range and indication for the state of charge for electric motorcycles and electric mopeds
GB 19758-2005 Limits and measurement methods for exhaust smoke emissions from motorcycles and mopeds
GB/T 24158-2018 General specifications for electric motorcycles and electric mopeds
GB/T 5363-1995 Method of bed test of gasoline engine for motorcycles and mopeds
GB/T 15366-2008 Types positions and performance requirements for controls of motorcycles and mopeds
GB 15365-2008 Symbols for controls indicators and telltales for motorcycles and mopeds
GB 20073-2006 Performance and measurement method for braking of motorcycles and moped
GB/T 26650-2011 Magnesium alloy castings for electric bicycle and motorcycle wheels
GB 18100-2000 Provisions for installation of two wheel motorcycle and moped lighting and light-signalling devices
GB/T 36672-2018 Lithium-ion battery for electric mopeds and motorcycles
GB 4569-2000 Limits and measurement of noise emitted by motorcycles
GB/T 24158-2009 Electric motorcycles and electric mopeds—General specifications
GB/T 15367-1994 Motorcycles and mopeds. Part and component designations for vehicle with three wheels
GB/T 5382-2008 Performance and measurement method for braking force of motorcycles and mopeds
GB 18100-2025 Provisions for the installation of lighting and light-signalling devices for motorcycles and mopeds
GB/T 5363-2008 Method of bench test of engine for motorcycles and mopeds
GB 14621-2002 Limits and measurement methods for exhaust emissions from motorcycles and mopeds at idle speed
GB 5359.2-1985 Terms and definitions for motorcycles--Dimensions of vehicles
SPC GB/T 5359.1-2019 Term for motorcycles and mopeds -- Part 1: Types of vehicles (TEXT OF DOCUMENT IS IN CHINESE)
GB/T 26650-2025 Magnesium alloy castings for motorcycle and electric bicycle wheels
GB/T 15367-2008 Motorcycles and mopeds part and component - Designations for vehicle with two and three wheels
GB 15365-2025 Symbols for controls, indicators and tell-tales for motorcycles and mopeds

Professional Standard - Automobile

QC/T 681-2002 Technical conditions for starting relay of motorcycle and moped
QC/T 232-1997 Test method and performance requirements for static strength of brake levers of motorcycle and moped
QC/T 235-1997 Specifications for exhaust mufflers of motorcycles and mopeds
QC/T 554-1999 Engines of automobile and motorcycle - Technical conditions for piston ring
QC/T 655-2005 Specifications of brakes for motorcycles and mopeds
QC/T 683-2002 Measurement method for cleanness limit of motorcycle and moped engine
QC/T 225-2013 Technical Specification of Starting Motor for Motorcycles and Mopeds
QC/T 654-2005 Test methods of braking devices for motorcycles and mopeds
QC/T 60-2009 Methods of running test on bench for motorcycles and mopeds
QC/T 234-1997 Specifications for steering bearings of motorcycles and mopeds
QC/T 779-2007 Technical specification of spark plug cap for motorcycles and mopeds
QC/T 226-2014 Specification of brake shoes assembly and brake linling assembly for motorcycles and moped
QC/T 595-1999 Electronic speedometer for automobile and motorcycle
QC/T 724-2016 Specification for direct current flasher units of motorcycles and mopeds
QC/T 820-2023 Stepper motor for automobile and motorcycle instrument
QC/T 819-2009 Frame of two-wheel motorcycle and two-wheel moped
QC/T 225-1997 Specifications and test methods for starter motors for motorcycles and mopeds
QC/T 225.1-1997 Technical specifications for starting dynamo of motorcycle and moped
QC/T 683-2024 The limits and measurement methods of cleanliness for motorcycle and moped engines
QC/T 682-2002 Motorcycles and mopeds cushion technology conditions
QC/T 231-2014 Specification of kick-starter for motorcycles and mopeds
QC/T 233-2014 Performance and measurement method for static intensity of motorcycles and mopeds
QC/T 225.2-1997 Test method for starting dynamo of motorcycle and moped
QC/T 700-2004 General technical specification of cylinder head for motorcycles and mopeds
QC/T 684-2002 Motorcycles and mopeds engine asbestos rubber gaskets
QC/T 1002-2015 Test method of durability in CH-DY for motorcycles and mopeds
QC/T 229-2013 Technical Requirements for the Motorcycle and Moped Rotor Oil Pump
QC/T 224-2016 Specifications of engine used in motorcycles and mopeds
QC/T 596-1999 Voltmeters for automobile and motorcycle
QC/T 71-1993 Specifications for motorcycle rims
QC/T 61-2008 Specifications and test methods on intensifying test of engine of motorcycles and mopeds
QC/T 214-1996 Combined instrument for automobile and motorcycle
QC/T 230-1997 Specifications for air filters of motorcycles and scooters
QC/T 12-1992 Fuel gauges for automobile and motorcycle
QC/T 1144-2021 Oxygen sensor for motorcycles and mopeds
QC/T 702-2004 Method of reliability test for catalytic converter of motorcycles and mopeds
QC/T 224-2007 Specifications of engine used in motorcycles and mopeds
QC/T 823-2024 Automobile and motorcycle level sensor
QC/T 802-2008 General Principles of Drawing and Document for Motorcycles and Mopeds
QC/T 684-2013 Specifications of sealing gaskets for engines of motorcycles and mopeds
QC/T 680-2002 Technical conditions for voltage governor of motorcycle and moped
QC/T 680-2014 General technical specifications for voltage regulators for motorcycles and mopeds
QC/T 727-2017 Instrument for automobile and motorcycle
QC/T 233-1997 Test method and performance requirements for static strength of brake pedal of motorcycle and moped
QC/T 231-1997 Specifications of kick-starter for motorcycles and mopeds
QC/T 738-2005 Specifications of electronic horn for motorcycles and mopeds
QC/T 735-2025 Motorcycles and mopeds use directional steering technical conditions
QC/T 11-1992 Ammeters for automobile and motorcycle
QC/T 655-2000 Brakes of motorcycles and mopeds - Specifications
QC/T 820-2009 Stepper motor for automobile and motorcycle instrumcnt
QC/T 226-1997 Specifications for brake shoe assembly of motorcycle and moped
QC/T 66-1993 Specifications for motorcycle clutch
QC/T 232-2009 Strength requirements and test methods for brake handle of motorcycles and mopeds
QC/T 800-2008 Method of bed test of continuously variable transmission for motorcycles and mopeds
QC/T 971-2014 Specifications of Air filter Element for motorcycles and scooters
QC/T 780-2007 Water radiator used in motorcycles
QC/T 681-2016 Starting relay for motorcycles and mopeds
QC/T 724-2004 Specification for direct current flasher units of motorcycles and mopeds
QC/T 234-2014 Specifications of steering bearing for motorcycles and mopeds
QC/T 727-2004 Instrument for automobile and motorcycle
QC/T 229-1997 Technical requirements for the motorcycle and moped rotor oil pump
QC/T 792-2007 Motors and controllers for electric motorcycles and electric mopeds
QC/T 823-2009 Fuel sensor for automobile and motorcycle
QC/T 224-1997 Specifications of engine used in motorcycles and mopeds
QC/T 962-2014 Specifications of painting coat for motorcycles and mopeds
QC/T 62-1993 Specifications for motorcycle damper
QC/T 738-2024 Electric horn for motorcycles and mopeds
QC/T 688-2002 General specifications of motorcycles and mopeds
QC/T 594-1999 Electronic speedometer for automobile and motorcycle
QC/T 209-1996 Flexible shaft for automobile and motorcycle
QC/T 68-2013 Technical Specification of Magneto for Motorcycles and Mopeds
QC/T 688-2016 General specifications of motorcycles and mopeds
QC/T 687-2002 Technical conditions for cylinder body of motorcycle and moped engine
QC/T 228.1-1997 Manipulation inhaul cable of motorcycle and moped - Technical specifications
QC/T 974-2014 Specifications of carriage for three-wheeled motorcycles and mopeds
QC/T 10-1992 Magnetic induction speedometer for automobile and motorcycle
QC/T 685-2002 General technical conditions for plunger type oil pump of motorcycles and mopeds
QC/T 752-2006 General specifications for catalytic converters of motorcycles and mopeds
QC/T 793-2007 Specifications and test methods of air filters for motorcycles and scooters
QC/T 212-1996 General technical specifications for aluminum alloy solid wheels of motorcycle and moped
QC/T 60-1993 Methods of running test on bench for motorcycles
QC/T 687-2016 Technical specifications of engine cylinder block for motorcycles and mopeds
QC/T 1152-2021 Specification of DC/dC converter for electric motorcycles and electric mopeds
QC/T 783-2007 Speedometer sensor for automobile and motorcycle
QC/T 688-2007 General specifications of motorcycles and mopeds
QC/T 209-2007 Flexible shaft for automobile and motorcycle
QC/T 654-2000 Test methods of braking devices for motorcycles and mopeds
QC/T 686-2002 Technical conditions for combined crankshaft connecting rod assembly of motorcycle and moped engine
QC/T 778-2007 Testing voltage for motorcycles and mopeds electric equipment
QC/T 792-2022 Motors and controllers for electric motorcycles and electric mopeds
QC/T 727-2007 Instrument for automobile and motorcycle
QC/T 64-1993 Specifications for motorcycle carburetor
QC/T 417-2021 Electrical wire harness assemblies for motorcycles and mopeds

Group Standards of the People's Republic of China

T/CCCM 4-2024 Technical Specifications for Ignition Coils for Motorcycles and Mopeds
T/XQGX 002-2021 Frames for electric motoreycles and eletric mopeds
T/ZJXDC 002-2022 Valve-regulated lead-acid batteries for electric motorcycles and electric mopeds
T/ZZB 3028-2022 DC/DC converter for electric motorcycles and electric mopeds
T/ZZB 2036-2021 Disc brake pads for motorcycles
T/ZZB 1974-2020 Racing motorcycle chain
T/ZZB 0174-2017 Two wheel police motorcycle
T/ZZB 0320-2018 Brushless DC motors for electric motorcycles and electric mopeds
T/CQAMSA 0001-2024 General framework for standard system of automobile and motorcycle sports
T/ZZB 0870-2018 Ignition switch and locks for motorcycle
T/JSQA 149-2022 Motorcycle LED headlamp
T/GDBIA 007-2024 Sodium-ion batteries for electric motorcycles and electric mopeds
T/GDCKCJH 109-2025 General technical requirements for hydrogen fuel cell motorcycles and mopeds
T/CCCM 5-2024 Technical Conditions for Intake and Exhaust Valves of Motorcycle and Moped Engines
T/CUPTA 050-2024 Quality classification and “leader” evaluation requirements for electric motorcycle and electric moped motors
T/CCCM 3-2023 Technical Specifications for Casting Aluminum Pistons for Motorcycles and Mopeds Engines

Chongqing Provincial Standard of the People's Republic of China

DB50/T 207-2005 Motorcycle and moped automatic centrifugal clutch (wet) technical specification

Professional Standard - Aviation

HBm 76.4-1988 Cylindrical wire connector for motorcycle
HBm 76.1-1988 General Technical Conditions for Motorcycles

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1659-2015 Imitation galvanic silver coatings for motorcycles and mopeds
DB44/T 1660-2015 Silicone High Temperature Resistant Coatings for Motorcycle and Moped Exhaust Mufflers

Beijing Provincial Standard of the People's Republic of China

DB11/ 182-2003 Limits and measurement methods for exhaust pollutants from motorcycles & mopeds under steady-state loaded mode
DB11/ 120-2014 Pollutant emission limits and measurement methods at dual-idling speeds for motorcycles and mopeds

Association Standard-China Association for Standardization

CAS 136-2007 General Techniques and Testing Method for Aluminium-Alloy Wheels of Motorcycles and Mopeda

Professional Standard - Public Safety Standards

GA 295-2001 Motorcycle helmets for police

Professional Standard - Machinery

JB 3933-1985 Technical conditions for piston rings of automobile and motorcycle engines
JB/T 14762-2024 Valve-regulated lead-acid batteries for electric motorcycles and electric mopeds
JB/T 10348-2002 Inverted tooth chains for motorcycles
JB/T 10348-2013 Inverted Tooth Chains for Motorcycles
JB/T 4282-2007 Lead-acid batteries for motorcycles

Jilin Provincial Standard of the People's Republic of China

DB22/T 2055-2014 Technical conditions for motorcycle fast repair enterprises

National Standardisation Body (ASRO)

STAS 627/2-1971 INNER TUPES FOR MOTORBICYCLES, SCOOTERS AND MOTORCYCLES TYRES Sizcs

Korean Agency for Technology and Standards (KATS)

KS R ISO TS 19466:2021 Electrically propelled mopeds and motorcycles — Test method for evaluating performance of regenerative braking systems
KS R ISO TS 19466-2021 Electrically propelled mopeds and motorcycles — Test method for evaluating performance of regenerative braking systems
KS M 6753-2014(2020) Pneumatic tyre for motorcycles and scooters
KS G 7203-1980 MOTOR CYCLISTS GLOVES
KS R ISO 8706-2007(2022) Two-wheeled mopeds－Parking stability of side-and center-stands
KS M 6753-2014 Pneumatic tyre for motorcycles and scooters
KS C 8510-2024 Lead-acid batteries for motorcycles
KS C 8510-2003 Lead-acid batteries for motorcycles
KS C 8510-2023 Lead - acid batteries for motorcycles
KS C 8510-1985 Lead-acid batteries for motorcycles
KS S 2010-2003(2023) Commercial motorcycle carriage service

International Organization for Standardization (ISO)

ISO/TS 19466:2017 Electrically propelled mopeds and motorcycles — Test method for evaluating performance of regenerative braking systems
ISO 6970:1994 Motorcycles and mopeds - Pollution tests - Chassis dynamometer bench
ISO 11838:1997/Amd 1:2011 Motorcycle and motorcycle-rider kinematics - Vocabulary; Amendment 1
ISO 14722:1998 Moped and moped-rider kinematics - Vocabulary
ISO 14722:1998/Amd 1:2011 Moped and moped-rider kinematics - Vocabulary; Amendment 1
ISO 11838:1997/Amd.1:2011 Motorcycle and motorcycle-rider kinematics — Vocabulary AMENDMENT 1
ISO 9565:1990 Two-wheeled motorcycles; parking stability of side- and centre-stands
ISO 14722:1998/Amd.1:2011 Moped and moped-rider kinematics — Vocabulary AMENDMENT 1
ISO 6727:2021/Amd 1:2024 Road vehicles — Motorcycles and mopeds — Symbols for controls, indicators and tell-tales — Amendment 1
ISO 8706:1990 Two-wheeled mopeds; parking stability of side- and centre-stands

Ente Nazionale Italiano di Unificazione

UNI 10220:1993 Tyres for motor vehicles, motorcycles, agricultural vehicles and their trailers. Millimetric series. Dimensional characteristics.
UNI EN 1938:2000 Personal eye protection - Goggles for motorcycle and moped users

Gosstandart of Russia

GOST 28613-1990 Paint coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control
GOST 5652-1989 Pneumatic tyres for motor-cycles, cycle-cars, motor-scooters and motor-bicycles. Specifications
GOST 6851-1991 Lead-acid storage non-starter batteries for motor cycles and motor-scooters. General specifications
GOST 6851-2003 Lead-acid storage starter and non-starter batteries for motor-cycles. General specifications
GOST 6851-1984 Lead storage batteries with capacity up to 30 ah. General specifications
GOST 4.397-1989 Product-quality index system. Motorcycles, scooters, mopeds, miniscooters. Index nomenclature
GOST R ISO 18243-2020 Electrically propelled mopeds and motorcycles. Safety requirements for lithium-ion battery systems and test specifications

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 7238-2008 Road vehicles.Motorcycles and mopeds frames.Technical requirements and test methods
TCVN 6890-2001 Road vehicles.Stands of two-wheel motorcycles, mopeds.Requirements and test methods in type approval
TCVN 6979-2001 Protective helmets for children travelling on motorcycles and mopheds
TCVN 7002-2002 Road vehicles.Rear registration plate lamps for moto vehicles (except motorcycles) and their trailers.Requirements and test methords in type approval

Association Francaise de Normalisation

NF R22-734:1990 MOTORCYCLES TYRES. INSTRUCTIONS FOR USE OF TYRES FOR MOTORCYCLES.
NF S72-305:1984 Protective helmets for motorcycle, moped and motorized bike users.
NF R33-601:1965 Electric bulbs for cycles and motor cycles.
NF S77-117*NF EN 1938:2010 Personal eye protection - Goggles for motorcycle and moped users
NF S72-304:1981 PROTECTIVE HELMETS USED IN MOTOR-CYCLE RACING.
NF S96-103:1999 Electrically powered wheelchairs, scooters, and their chargers. Requirements and test methods.
NF S96-103*NF EN 12184:2014 Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods

British Standards Institution (BSI)

BS 5012 DIVISIONS XIX TO XXIII:1924 Cycle and motor cycle parts
BS 1717:1951 Steel tubes for cycle \nd motor cycle purposes
BS 1717:1983 Specification for steel tubes for cycle and motor cycle purposes
BS ISO 19689:2016 Motorcycles and mopeds. Communication between vehicle and external equipment for diagnostics. Diagnostic connector and related electrical circuits, specification and use
BS EN 12184:2014 Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods
BS EN 12184:2010 Electrically powered wheelchairs, scooters and their chargers. Requirements and test methods
BS EN 12184:1999 Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods
BS EN 12184:2009 Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods

German Welding Society

DVS 2509:1999-08 Correction and welding of steel motorcycle frames

German Institute for Standardization

DIN 7837-2:1984 Steel measuring tapes for rims for motorcycles and sidecars
DIN EN 1938:1998-12 Personal Eye Protection - Goggles for Motorcycle and Moped Users
DIN EN 1938:1998 Personal eye protection — Goggles for motorcycle and moped users
DIN EN 1938:2010-12 Personal eye protection - Goggles for motorcycle and moped users; German version EN 1938:2010
DIN EN 12184:1999 Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods
DIN EN 1938 E:2008 Draft Document - Personal eye protection - Goggles for motorcycle and moped users; German version prEN 1938:2007

GCC Standardization Organization

OS GSO ISO 10231:2024 Motorcycle tyres — Test methods for verifying tyre capabilities
GSO ECE 22:2022 Uniform provisions concerning the approval of protective helmets and their visors for drivers and passengers of motor cycles and mopeds
GSO ISO 9565:2007 Two-wheeled motorcycles -- Parking stability of side- and centre-stands
GSO ISO 8706:2013 Two-wheeled mopeds -- Parking stability of side- and centre-stands
GSO ISO 10190:2013 Motorcycle chains -- Characteristics and test methods
GSO ECE 7:2010 Uniform provisions concerning the approval of front and rear position (side) lamps, stop-lamps and end-outline marker lamps for motor vehicles (except motor cycles) and their trailers

Austrian Standards

ONORM V 5033 Teil.4-1989 Tyres for motor-cycles; tyres, rims and valves for motor-cycles
ONORM V 5033 Teil.2-1989 Tyres for motor-cycles; tyres, rims and valves for mopeds and small cubic capacity motorcycles

Bureau of Indian Standards

IS 10063-1982 Scooter and motorcycle rear shock absorber end fitting dimensions

Polski Komitet Normalizacyjny (PKN)

PN S95020-1972 Speedometers for cars and mopeds Basic requirements and tests
PN BN 7161-29-1966 Export motorcycles. Box for bikes and parts

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ECE 22:2023 Uniform provisions concerning the approval of protective helmets and their visors for drivers and passengers of motor cycles and mopeds
BH GSO ISO 9565:2015 Two-wheeled motorcycles -- Parking stability of side- and centre-stands
BH GSO ECE 7:2011 Uniform provisions concerning the approval of front and rear position (side) lamps, stop-lamps and end-outline marker lamps for motor vehicles (except motor cycles) and their trailers
BH GSO ISO 8706:2016 Two-wheeled mopeds -- Parking stability of side- and centre-stands
BH GSO ISO 10190:2016 Motorcycle chains -- Characteristics and test methods

Japan Electronics and Information Technology Industries Association

JASO T203-1985 Light Alloy Wheels for Motorcycles

Society of Automotive Engineers (SAE)

SAE J1579-2003 Motorcycle Side Stand Retraction Performance Requirements
SAE J1579-2014 Motorcycle Side Stand Retraction Performance Requirements
SAE J1579-1989 Motorcycle Side Stand Retraction Performance Requirements
SAE J1579-1998 Motorcycle Side Stand Retraction Performance Requirements
SAE J1579-2009 Motorcycle Side Stand Retraction Performance Requirements
SAE J1579_200305 Motorcycle Side Stand Retraction Performance Requirements
SAE J1578-1997 Motorcycle Side Stand Retraction Test Procedure
SAE J1578_198906 Motorcycle Side Stand Retraction Test Procedure
SAE J1578-1989 Motorcycle Side Stand Retraction Test Procedure@ Recommended Practice
SAE J1578-2014 Motorcycle Side Stand Retraction Test Procedure
SAE J1579_200901 Motorcycle Side Stand Retraction Performance Requirements
SAE J1579_201410 Motorcycle Side Stand Retraction Performance Requirements
SAE J1578-2009 Motorcycle Side Stand Retraction Test Procedure
SAE J1578-2003 Motorcycle Side Stand Retraction Test Procedure
SAE J1578_200901 Motorcycle Side Stand Retraction Test Procedure
SAE J1578_201410 Motorcycle Side Stand Retraction Test Procedure
SAE J1578_200308 Motorcycle Side Stand Retraction Test Procedure
SAE J1578_199707 Motorcycle Side Stand Retraction Test Procedure
SAE J1579_199804 Motorcycle Side Stand Retraction Performance Requirements

Czech Standards Institute (UNMZ)

CSN 30 0036-1983 Dimensions o? motorcycles and mopeds. Terms and de-finitione
CSN 30 0037-1984 Weigjhte of mopede and motorcycle*. Definitions of basic tenns
CSN 36 4318-1985 Lead accumulator batteries 12 V for motorcycles

Japanese Industrial Standards Committee (JISC)

JIS D 4215:1995 Rims for motorcycles
JIS D 5302:2022 Lead-acid batteries for motorcycles
JIS D 5302:1997 Lead-acid batteries for motorcycles

Society of Automotive Engineers of Japan JSAE

JASO T010-1992 Parking stability of side-stands and centre-stands for motorcycles

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 9565:2007 Two-wheeled motorcycles -- Parking stability of side- and centre-stands
OS GSO ECE 7:2010 Uniform provisions concerning the approval of front and rear position (side) lamps, stop-lamps and end-outline marker lamps for motor vehicles (except motor cycles) and their trailers
OS GSO ISO 8706:2013 Two-wheeled mopeds -- Parking stability of side- and centre-stands

Yugoslav Association for Standardization

JUS G.E3.451/1-1989 Moped tyres and motocycles tyres and its trailers tyres for speeds 50 and 100 km/h. Amendments
JUS G.E3.301/1-1989 Motocycle tyres and motocycles trailers tyres for speeds to 150 km/h. Amendments
JUS G.E3.451-1982 Moped tyres and motocycles tyres and its trailers tyres for speeds 50 and 100 km/h

Swedish Institute for Standards

SIS SEN 31 03 61-1963 Moped lamps
SS-EN 1938:1999 Personal eye protection - Goggles for motorcycle and moped users
SS-EN 13781:2012 Protective helmets for drivers and passengers of snowmobiles and bobsleighs
SS-EN 1938:2010 Personal eye protection - Goggles for motorcycle and moped users

Magyar Szabványügyi Testület

MSZ 11431-1959 Metal wire for bicycles and motorcycles

Japan Lubricating Oil Society

JASO T202-1977 Test Code of Brake Lever Strength and Requirements for Motor Cycles

South African Bureau of Standard

SANS 20022:2005 Uniform provisions concerning the approval of protective helmets and of their visors for drivers and passengers of motor cycles and mopeds
SANS 20004:1997 Uniform provisions concerning the approval of devices for the illumination of rear registration plates of motor vehicles (except motor cycles) and their trailers

Standards Norway

NS-EN 1938:2010 Personal eye protection — Goggles for motorcycle and moped users
NS-EN 1938:1998 Personal eye protection — Goggles for motorcycles and moped users

Thai Industrial Standards Institute (TISI)

TIS 97-1993 Brake linings for automobiles and motorcycles

Spanish Association for Standardization (UNE)

UNE-EN 1938:2010 Personal eye protection - Goggles for motorcycle and moped users (Endorsed by AENOR in February of 2011.)
UNE-EN 1938:1999 PERSONAL EYE PROTECTION. GOGGLES FOR MOTORCYCLES AND MOPED USERS
UNE 69-008-1989 Recommendations for maintenance and safe use of motorcycle tires
UNE 69-009-1989 Replacement and safe use suggestions for motorcycle tires

Danish Standards Foundation

DANSK DS/EN 1938:2010 Personal eye protection - Goggles for motorcycle and moped users

Standards New Zealand

NZS 1215:1969 PROTECTIVE HELMETS FOR MOTOR CYCLISTS

U.S. Military Regulations and Norms

ARMY A-A-52165 A-1996 MOTORCYCLES: 1000 AND 1300 CC, COMMERCIAL
ARMY A-A-52165 A VALID NOTICE 1-2004 MOTORCYCLES: 1000 AND 1300 CC, COMMERCIAL

Lithuanian Standards Office

LST EN 12184-2014 Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods

Vertrauen durch Sicherheit

VDS 2597en web Guidelines for Physical Security Devices Locks for Bicycles and Motorcycles Requirements and Test Methods

European Committee for Standardization (CEN)

EN 12184:2009 Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods
EN 12184:1999 Electrically Powered Wheelchairs, Scooters and Their Chargers - Requirements and Test Methods
prEN 819-1992 Helmets for landbased motor vehicle competition use (motor cycles and automobiles)

Others: