QJ 1454A-2005 in English

1 Scope

This standard specifies the general technical requirements for final-assembly checkout of solid rocket motors, e.g. basic technical requirements, technical requirements for assembly, technical requirements for inspection, and qualification evaluation after final-assembly checkout.

This standard is applicable to final-assembly and inspection of solid rocket motor.

2 Normative references

The following normative documents contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply to this standard. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.

GB/T 678 Chemical reagent — Ethanol
GB 1787 Aviation gasoline
GB/T 6026 Acetone for industrial use
GB/T 12589 Chemical reagent — Ethyl acetate
GJB 3387 Terms for rocket engine
QJ 550 Sealing parts and sealing method — Tubular lead seal
QJ 833 Sealing method
QJ 1354A-2005 General technical requirements for painting, external marking and packing of solid rocket motors
QJ 2850 Prevention and control for foreign object debris (FOD) of space products
FZ 66106 Gauze for special industry
SH 0354 Solvent cutback rust preservative oil

3 Terms and definitions

For the purposes of this standard, the terms and definitions given in GJB 3387 apply.

Foreword i
1 Scope
2 Normative references
3 Terms and definitions
4 Basic technical requirements
5 Technical requirements for assembly
6 Technical requirements for inspection
7 Qualification evaluation after final-assembly checkout of motor
8 Painting, external marking and packaging requirements