TY/T 3601-2023 in English
VALIDInstructions for use of rowing equipment
- Issued on:2023-09-01
- Implemented on:2023-11-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$252.00
| Standard No: | TY/T 3601-2023 |
| Document status: | VALID |
| Title in English: | Instructions for use of rowing equipment |
| Title in Chinese: | 赛艇器材使用规范 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2023-09-01 |
| Implemented on: | 2023-11-01 |
| ICS Classification: | 97.220.40-Outdoor and water sports equipment |
| Chinese Classification: | Y56-Sports goods |
| Professional Classification: | TY-Sports |
| Related Keywords: | equipment maintenance procedures
use flush equipment introduction analysis use thread locker equipment safety |
Introduction
Analysis of the core content of the standard
As a sports industry standard, TY/T 3601-2023 systematically regulates the management requirements of the entire life cycle of rowing equipment, including selection-debugging-use-maintenance. The standard is applicable to still water competition training scenarios and puts forward clear technical indicators for equipment safety, adaptability and environmental conditions.
Comparison of key technical indicators
| Project | Single-person boat | Multi-person boat | Detection method |
|---|---|---|---|
| Lower weight limit (kg) | 14 | 27-96 | Electronic scale weighing |
| Safety ball diameter (mm) | ≥40 | Vernier caliper measurement | |
| Footrest board angle (°) | 38-45 | Angle meter detection | |
Key points for equipment debugging
1. Oar bolt parameter setting
The oar bolt height and oar bolt angle need to be adjusted simultaneously:
- Height reference: The vertical distance between the slide seat and the oar bolt when the slide seat is in the lowest position (the left oar needs to be higher than the right oar)
- Angle range: Longitudinal/lateral angle error ≤0.3°
2. Dynamic balance debugging
Adjust the center point of the oar by the position of the slide rail:
- Determine the center of gravity of the boat
- Calibrate the center axis of the oar bolt column
- Finely adjust the pedal position according to the athlete's body shape
Implementation Suggestions
Training Site Selection
Strictly comply with the three no principles: no flow velocity (≤0.1m/s), no waves (wave height <5cm), no floating objects. It is recommended that the length of the water area be ≥2300m and the water depth be ≥3m.
Equipment maintenance procedures
Establish a three-level maintenance system:
| Frequency | Operation content | Tools |
|---|---|---|
| After each use | Flush the hull with fresh water, check the tightness of the bolts | Torque wrench |
| Monthly | Lubricate the slide rail system, check the air tank sealing | Silicon-based lubricant |
| Annually | Comprehensive paint repair, structural strength detection | Ultrasonic flaw detector |
Standard Evolution Analysis
Compared with GB/T 13412, the innovation of this standard is reflected in:
- New specifications for new accessories such as electronic channel sign clip
- Detailed wind adaptability adjustment parameters (dynamic adjustment of propeller length)
- Strengthen transportation and storage protection requirements (V-shaped foam pads)
Solutions to common problems
Problem 1: Loose propeller bolts
Solution: Use thread locker (LOCTITE 243) to handle the bolted joints and check the torque value regularly.
Problem 2: Water seepage in the hull
Solution: Immediately stop using, use epoxy resin + fiberglass cloth for double-layer repair, and test for 72 hours of curing.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
