YY/T 1076-2004 in English

YY/T 1076-2004 Hose biopsy sampling forceps used with endoscope - General specifications

1 Scope

This standard specifies the classification, requirements, test methods, inspection rules, marking, instructions for use, packaging, transportation and storage of hose biopsy sampling forceps used with endoscope.

This standard is applicable to hose biopsy sampling forceps used with endoscope (hereinafter referred to as sampling forceps) for pathological analysis by taking biopsies through soft endoscopic forceps.

2 Normative references

The following standard contains provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections), or revisions, of any of these publications do not apply to this standard. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For any undated references, the latest edition of the document referred to applies.

GB/T 1220-1992 Stainless steel bars
GB/T 2828.1-2003 Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (ISO 2859.1:1999, IDT)
GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
GB/T 4340.1-1999 Metallic materials - Brinell hardness test - Part 1: Test method (eqv. ISO 6507-1:1997)
GB/T 8938-1988 Typewriter tissue
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
YY/T 1052-2004 Marking requirements for surgical instruments

3 Classification

3.1 Type and basic size

Foreword i
1 Scope
2 Normative references
3 Classification
4 Requirements
5 Test methods
6 Inspection rules
7 Marking and instructions for use
8 Packaging, transportation and storage