Thermogravimetric speed

Thermogravimetric speed, Total:135 items.

The international standard classification for "Thermogravimetric speed" includes: Cranes , Explosives. Pyrotechnics , Non-ferrous metals .

The Chinese standard classification for "Thermogravimetric speed" includes: Hoisting machinery , Chemical product , Electrical insulating material and its products , Technical management .

National Metrological Verification Regulations of the People's Republic of China

JJG 1071-2011 Verification Regulation of Verification Equipment of Linear Accelerometer by Earths Gravitation
JJG 1144-2017 The Gravitational Acceleration Wave Buoy
JJG(海洋) 04-2003 Verification rules for gravity acceleration type wave buoy

Taiwan Provincial Standard of the People's Republic of China

CNS 7191-2006 Reduction gears of cranes
CNS 6643-2006 Safe working loads,rated-speed and slewing radius of cranes
CNS 11738-1986 Method of Test for Specific Gravity and True Porosity of Insulating Fire Bricks
CNS 6643-1984 Safe Working Loads, Rated - Speed and Slewing Radii of Cranes
CNS 7191-1981 Cranes Reduction Gears Connecting Dimentions, Contour Gauges, Output Torgues

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22414-2008 Cranes - Measurement of velocity and time parameters
GB/T 31229-2014 Test method for volatility rate by thermogravimetry
GB/T 19469-2004 Determination of ignition temperature of pyrotechnic composition - DTA-TG analysis

National Metrological Technical Specifications of the People's Republic of China

JJF 2084-2023 Calibration Specification for Linear Accelerometers by Earth’s Gravitation

Professional Standard - Commodity Inspection

SN/T 2240-2008 Accelerated storage test,thermal analysis methods for dangerous goods—Differential thermal analysis(DTA)and thermo gravimetric analysis(TGA)

未注明发布机构

ASTM RR-E37-1017 1996 E1582-Test Method for Temperature Calibration of Thermogravimetric Analyzers
NB 20493-2018 Identification of thermocouple thermometers important for nuclear power plant safety
SAE J820-201706 Crane Hoist Line Speed and Power Test Code

Professional Standard - Machinery

JB/T 1544-2015 Rapid test procedure for thermal endurance of electrical insulating impregnting varnishes and varnished fabrics.Thermogravameric point slope(TPS) method
JB/T 1544-1999 Rapid test procedure for thermal endurance of electrical insulating impregnating varnishes and varnished fabrics-thermogravameric point slope(Tps) method
JB/T 5401-1991 Tungsten - rhenium thermocouple wires for quickly measuring molten steel temperature

Guangdong Provincial Standard of the People's Republic of China

DB44/T 402.3-2007 Thermostat for domestic gas instantaneous water heater

工业和信息化部

JB/T 13906.3-2020 Fast hydraulic press of hot stamping-Part 3:Testing of the accuracy

Professional Standard - Ferrous Metallurgy

YB 4084-1992 Tungsten-rhenium thermocouple for rapid measurement of molten steel temperature

Professional Standard - Energy

NB/T 20375-2016 Thermocouples important to safety in nuclear power plants

Professional Standard - Non-ferrous Metal

YS/T 118.16-2012 Methods of determination and calculation of heat balance in metallurgical furnaces for heavy non-ferrous metals(Copper flash smelting furnace)
YS/T 118.17-2012 Methods of Determination and Calculation of Heat Balance in Metallurgical Furnaces for Heavy Non-ferrous Metals (Nickel Flash Smelting Furnace)

国家能源局

NB/T 20493-2018 Qualification of thermocouples important to safety in nuclear power plants

German Institute for Standardization

DIN 15022:1979-09 Cranes; lifting hights, operating speeds
DIN 15022:1979 Cranes; lifting hights, operating speeds
DIN ISO 15312:2019 Rolling bearings - Thermal speed rating - Calculation (ISO 15312:2018)
DIN ISO 15312:2018 Rolling bearings - Thermal speed rating - Calculation (ISO 15312:2018); Text in German and English
DIN SPEC 91127:2011 Recommendation for Temperature Calibration of Fast Scanning Calorimeters (FSCs) for Sample Mass and Scan Rate; Text in English

American Society for Testing and Materials (ASTM)

ASTM E2008-08 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E2008-07 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E914-83(1993)e1 Practice for Evaluating Temperature Scale for Thermogravity
ASTM D3464-96(2001) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D3464-96(2023) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D3850-19 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM E2008-99 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM D3464-96(2014) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM D3464-96 Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
ASTM E2008-04 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM E1582-93 Standard Practice for Calibration of Temperature Scale for Thermogravimetry
ASTM D3850-12 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM E2008-06 Standard Test Method for Volatility Rate by Thermogravimetry
ASTM D3850-94(2006) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
ASTM D3850-94(2000) Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)

HU-MSZT

MSZ 6709-1961 B-type crane working speed
MSZ 12433/8-1969 Main technical features Lift lifting capacity, speed
MSZ 12433/8.lap-1969 Main industrial characteristics of the hoist, load-bearing capacity and speed
MSZ 2509/4-1987 Highway structural load-bearing capacity test. Degree of curvature
MSZ 12433/2-1967 Main technical characteristics, electric lifting capacity, speed, maximum lifting height
MSZ 8888/4.lap-1963 Climate detection. Accelerate moisture and heat detection
MSZ 12433/4.lap-1967 Main industrial characteristics of lifting machinery Bearing capacity, speed and maximum lifting height of electric cranes
MSZ 7346-1962 Main information and operating speed of single-person electric crane
MNOSZ 6720-1952 Manual speed crane

IT-UNI

UNI 4548-1960 crane. Lifting height and working speed

SCC

VDI 3573-2018 Working speeds of rail-mounted cranes
VDI 3573-2018 Working speeds of rail-mounted cranes
VDI 2397-2000 Selection of working speeds of bridge cranes
VDI 2397-2000 Selection of working speeds of bridge cranes
AATCC 201-2013 Drying Rate of Fabrics: Heated Plate Method (Reaffirmed 2013)
AATCC 201-2012 Drying Rate of Fabrics: Heated Plate Method
AATCC 201-2014 Drying Rate of Fabrics: Heated Plate Method
AATCC 133-2009 Colorfastness to Heat: Hot Pressing (Reaffirmed and Editorial Revision 2009)
BS ISO 15312:2003 Rolling bearings. Thermal speed rating. Calculation and coefficients
AWWA WQTC52892 Statistical Analysis and Reporting of Rapid Gravity Filter Turbidity Data
AS 2907:1986 Shorthand speed tests
BS ISO 7176-6:2001 Wheelchairs-Determination of maximum speed, acceleration and deceleration of electric wheelchairs

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE SF-98-20-4-1998 Impact of Velocity and Temperature Fluctuations on the Accuracy of Low-Velocity Measurements Indoors by Thermal Anemometers
ASHRAE SF-98-20-3-1998 Impact of Natural Convection on the Accuracy of Low-Velocity Measurements by Thermal Anemometers with Omnidirectional Sensor
ASHRAE 3977-1996 Experimental Comparison of Two-Speed and Single-Speed Geothermal Heat Pumps

VDI - Verein Deutscher Ingenieure

VDI 3573-2016 Arbeitsgeschwindigkeiten von schienengebundenen Kranen
VDI 3573-2008 Working speeds of rail mounted handling cranes
VDI 3573-1972 Auswahl der wirtschaftlichen Arbeitsgeschwindigkeiten von Hafenkranen
VDI 2397-1969 Auswahl der wirtschaftlichen Arbeitsgeschwindigkeiten von Brueckenkranen
VDI 3573-1994 Arbeitsgeschwindigkeiten schienengebundener Umschlagkrane

AENOR

UNE 58507:1977 MOBILE CRANES. APPROPIATE SPEEDS
UNE 48145:1960 VELOCITY OF THERMIC THICKENING OF DRYING OILS
UNE 58160:2005 Cranes. Measurement of velocity and time parameters.
UNE 20551:1975 SPEED FLUCTUATIONS IN SOUND RECORDING AND REPRODUCING EQUIPMENT: METHOD OF MEASUREMENT

PT-IPQ

NP 2059-1987 Ascenseurs et monte-charges. Charges et vitesses

Korean Agency for Technology and Standards (KATS)

KS B ISO 13202:2015 Cranes — Measurement of velocity and time parameters
KS B ISO 13202:2004 Cranes-Measurement of velocity and time parameters
KS B ISO 13202-2020 Cranes — Measurement of velocity and time parameters
KS B ISO 13202-2015(2020) Cranes — Measurement of velocity and time parameters
KS C IEC 60386:2013 Method of measurement of speed fluctuations in sound recording and reproducing equipment
KS B ISO 15312:2021 Rolling bearings — Thermal speed rating — Calculation
KS B 6239-1982 Safe working loads, rated speeds and slewing radii of cranes
KS B 6239-2012 Safe working loads, rated speeds and slewing radii of cranes
KS B 0867-2021 Method of controlled thermal severity weld cracking test
KS B ISO 1088:2015 Liquid flow measurement in open channels－Velocity-area methods－Collection and processing of data for determination of errors in measurement
KS B ISO 1088:2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement

RO-ASRO

STAS 7287-1973 Ho ist ing equipiment RANGE OF NOMINAI WORKING SPETDS

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD79E-2005 Double Data Rate (DDR) SDRAM Specification
JEDEC JESD79-4A-2007 Low Power Double Data Rate (LPDDR) SDRAM Specification

ES-AENOR

UNE 48 145 Thermal thickening rate of drying oil

Association of German Mechanical Engineers

VDI 3573-2010 Working speeds of rail mounted handling cranes

Association Francaise de Normalisation

NF ISO 15312:2018 Bearings - Thermal reference speed - Calculations
NF E22-390*NF ISO 15312:2018 Rolling bearings - Thermal speed rating - Calculation

British Standards Institution (BSI)

BS ISO 13202:2003 Cranes - Measurement of velocity and time parameters
BS ISO 15312:2018 Rolling bearings. Thermal speed rating. Calculation
BS EN ISO 6179:2010 Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique)
BS ISO 7176-6:2002 Wheelchairs - Determination of maximum speed, acceleration and deceleration of electric wheelchairs
BS ISO 19935-3:2021 Plastics. Temperature modulated DSC. Separation of overlapping thermal transitions

ZA-SANS

SANS 13202:2007 Cranes - Measurement of velocity and time parameters

GSO

OS GSO ISO 13202:2014 Cranes -- Measurement of velocity and time parameters
GSO ISO 13202:2014 Cranes -- Measurement of velocity and time parameters
GSO ISO 15312:2014 Rolling bearings -- Thermal speed rating -- Calculation and coefficients

International Organization for Standardization (ISO)

ISO 13202:2003 Cranes - Measurement of velocity and time parameters
ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
ISO 6179:1981 Fabrics coated with vulcanized rubber — Determination of vapour transmission rate of volatile liquids (Gravimetric technique)

YU-JUS

JUS M.D1.011-1980 Industrial cranes. Speed, puwer and deflection measuring. Imtructiom

RU-GOST R

GOST 26334-1984 Electric lifts. Load capacity and speed ranges

Society of Automotive Engineers (SAE)

SAE J820-1980 Crane Hoist Line Speed and Power Test Code
SAE J820-1998 Crane Hoist Line Speed and Power Test Code

SAE - SAE International

SAE J820-2017 Crane Hoist Line Speed and Power Test Procedure

Japanese Industrial Standards Committee (JISC)

JIS B 8820:2004 Rated capacity, rated speeds and slewing radius of cranes
JIS B 8820:1995 Safe working loads, rated speeds and slewing radii of cranes

CZ-CSN

CSN IEC 386:1992 Method of measurement of speed fluctuations in sound recording and reproducing equipment

KR-KS

KS B ISO 15312-2021 Rolling bearings — Thermal speed rating — Calculation
KS C IEC 60386-2013(2023) Method of measurement of speed fluctuations in sound recording and reproducing equipment
KS B ISO 1088-2021 Hydrometry — Velocity-area methods using current-meters —Collection and processing of data for determination of uncertainties in flow measurement

International Electrotechnical Commission (IEC)

IEC 60386:1972 Method of measurement of speed fluctuations in sound recording and reproducing equipment
IEC 60386:1972/AMD1:1988 Amendment 1 - Method of measurement of speed fluctuations in sound recording and reproducing equipment

IN-BIS

IS 8152-1976 Method for measuring speed fluctuations in recording and playback equipment

UNKNOWN

YB 4084-92 Tungsten-rhenium thermocouple for rapid measurement of molten steel temperature

American National Standards Institute （ANSI)

ANSI/ASTM D3850:2012 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method (TGA)
ANSI E1.6-4-2013 Portable Control of Fixed-Speed Electric Chain Hoists in the Entertainment Industry

IX-UIC

UIC OR 410-2006 Composition and calculation of the weight and braking of passenger trains

ESDU - Engineering Sciences Data Unit

ESDU 68023-1978 Thermal conductivity@ viscosity@ heat capacity@ density and Prandtl number of solid@ liquid and gaseous heavy water.

Society of Motion Picture and Television Engineers (SMPTE)

SMPTE ST 4-1995 Television Analog Recording - 2-in Magnetic Tape for Quadruplex Recording - Speed
SMPTE 4-1995 Television Analog Recording - 2-in Magnetic Tape for Quadruplex Recording - Speed
SMPTE 164-2002 Motion-Picture Film (8-mm Type S) - Magnetic Audio Record - Position, Dimensions, and Reproducing Speed

Standard Association of Australia （SAA）

AS 2907:2001 Shorthand speed tests
AS 3696.6:1990(R2014) Determination of maximum speed, acceleration and deceleration of electric wheelchairs