stress test time

stress test time, Total:80 items.

The international standard classification for "stress test time" includes: Protection against dangerous goods , Power stations in general , Rubber , Aircraft and space vehicles in general .

The Chinese standard classification for "stress test time" includes: Marking, packaging, transport and storage in general , Electric power system , Rubber products in general , Engine , Technical Management .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 26866-2022 Testing specifications of power time synchronism systems
GB/T 1684-1985 Vulcanized rubber--Testing short time static compression
GB/T 21579-2008 Dangerous goods - Test method of time/pressure

Military Standard of the People's Republic of China-General Armament Department

GJB 736.16A-2019 Test methods for pyrotechnics Part 16: Determination of ignition pressure-time curve
GJB 736.16-1994 Pyrotechnics Test Method Ignition Pressure-Time Curve Determination
GJB 3597-1999 Frequency Agility Time Test Method
GJB 5309.24-2004 Test methods for pyrotechnics Part 24: Determination of ignition pressure-time curve

Professional Standard - Aerospace

QJ 1047-1986 Solid rocket motor pressure-time, thrust-time data processing specification
QJ 1047-1992 Data Processing Specifications for Pressure - Time and Thrust - Time of Solid Rocket Engine

Professional Standard - Military and Civilian Products

WJ/Z 201-1984 Piezoelectric fuze action time (piezoelectric mechanism-electric detonator) simulation test method
WJ/Z 384-1995 Processing time quota for powerful spinning of rockets

Professional Standard - Electron

SJ 443-1973 Method of measurement for cathode heating time of high-voltage rectifier tubes

Henan Provincial Standard of the People's Republic of China

DB41/T 906-2014 taxi time tester

Professional Standard - Commodity Inspection

SN/T 3054.1-2011 Test Method of Explosivity for Import Solid Waste Materials. Part 1: Time/Pressure Test

Group Standards of the People's Republic of China

T/ZKJXX 00001-2021 Test methods of multi-channel time interval meters
T/ZSA 111-2022 Specification for testing of multi-channel time interval meters

Professional Standard - Medicine

YY/T 1156-2009 Thrombin time reagent(Kit)

Professional Standard - Chemical Industry

HG/T 3843-2008 Vulcanized rubber - Test method for short time static compression
HG/T 3843-2006 Vulcanized rubber; Testing short time static compression

Professional Standard - Post and Telecommunication

YD/T 2550-2013 Test methods of time synchronization equipment

German Institute for Standardization

DIN 53769-3:1988 Testing of glass fibre reinforced plastics pipes; determination of initial and long-term ring stiffness
DIN 53758:1975 Testing of plastics articles; determination of the effect of internal pressure on hollow objects by short-time test
DIN 53759:1975-02 Testing of plastics articles; determination of the effect of internal pressure on hollow objects by long-time test
DIN 53759:1975 Testing of plastics articles; determination of the effect of internal pressure on hollow objects by long-time test
DIN 51226:1977 Material testing machine Metal tensile stress long time creep testing machine
DIN 53465:1963-04 Testing of Plastics; Determination of the Closing Time of Thermosetting Compression Moulding Materials
DIN EN 60645-3:1995 Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration
DIN 10970:2002-09 Sensory analysis - Time intensity test

Gosstandart of Russia

GOST 265-1977 Rubber. Methods of short static compression tests

Magyar Szabványügyi Testület

MSZ 3607/2-1971 Canned food water absorption and cooking time test

Fondo para la Normalización y Certificación de la Calidad Venezuela, République bolivarienne du

NORVEN 540 P 1971 Put different pressures on the safe or chamber to test its protection level

Bureau of Indian Standards

IS 4592-1968 Gap frame press test chart
IS/IEC 60645-3-2020 Electroacoustics-Audiometric Equipment - Part 3 Test Signals of Short Duration
IS 13867-1993 Rubber. Standard temperatures, humidities and times for the conditioning and time interval between vulcanization and tersting of test pieces
IS 2183-1973 Schedule for high pressure mercury vapour lamps

National Standardisation Body (ASRO)

STAS SR ISO 3503:1995 Assembled joints between fittings and polyethylene (PE) pressure pipes-Test of leakproofness under internai pressure when subjected to bending

American Society for Testing and Materials (ASTM)

ASTM RR-E28-1034 2009 E0292-Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
ASTM D5483-20 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D5483-02 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM D5483-21 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
ASTM RR-D02-1025 1976 D3520- Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method)

GM Europe

GME L-5A/B-2012 AK-Master Test Schedule

Standard Association of Australia （SAA）

AS 1774.34:2004 Refractories and refractory materials - Physical test methods - Guide to the determination of extrusion pressure and curing time of taphole clay

Swedish Institute for Standards

SIS SS 02 01 21-1980 Atmospheres and times for testing
SS-EN 60645-3:2008 Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration
SS-EN IEC 60645-3:2021 Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration
SIS 02 01 21-1968 Atmospheric conditions and time for testing
SIS SS 13 72 09-1980 Concrete testing — Hardened concrete — Testing age

US Federal Contractor Registration (USFCR)

FCR FED H-08-4 VOL 4-E-G-1-1988 TRANSFORMER SCHEDULE

American Association of State Highway and Transportation Officials

AASHTO T 197M/T 197-2008 Standard Method of Test for Time of Setting of Concrete Mixtures by Penetration Resistance

Spanish Association for Standardization (UNE)

UNE 52 003 Determination of working time, standard time and time types
UNE-EN IEC 60645-3:2020 Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration (Endorsed by Asociación Española de Normalización in January of 2021.)
UNE-EN IEC 62271-108:2020 Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration (Endorsed by Asociación Española de Normalización in January of 2021.)

Society of Automotive Engineers (SAE)

SAE J1506-1991 Emission Test Driving Schedules@ Information Report; (June 1991)
SAE J1506-1993 EMISSION TEST DRIVING SCHEDULES
SAE J1506-1988 Emission Test Driving Schedules
SAE J1506-2002 Emission Test Driving Schedules
SAE AIR5020-2004 Time-Dependent In-Flight Thrust Determination
SAE AIR5020A-2012 Time-Dependent In-Flight Thrust Determination
SAE AIR5020-1996 Time-Dependent In-Flight Thrust Determination

Czech Standards Institute (UNMZ)

CSN 66 1242-1984 Test for permanganate time
CSN 50 0338-1986 Testing of filtering páper. etermination í the filtration time

British Standards Institution (BSI)

BS EN 60645-3:1995 Audiometers-Auditory test signals of short duration for audiometric and neuro-otological purposes
BS 4550-3-3.6:1978 Methods of testing cement. Physical tests-Test for setting times
18/30376570 DC BS EN 60645-3. Electroacoustics. Audiometric equipment. Part 3. Test signals of short duration

Japanese Industrial Standards Committee (JISC)

JIS B 8419:2010 Pneumatic fluid power -- Directional control valves -- Measurement of shifting time and response time

Comitato Elettrotecnico Italiano

CEI EN 60645-3:2008 Electroacoustics - Audiometric equipment - Part 3: Test signals of short duration
CEI EN IEC 60645-3:2021 Electroacoustics - Audiometric equipment Part 3: Test signals of short duration

GCC Standardization Organization

OS GSO ASTM C191:2024 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle

Korean Agency for Technology and Standards (KATS)

KS L 5103-1996(2016) Testing method for setting time of hydraulic cement by Gilmour needles
KS B 6172-2021 Methods of Test for Time Recorders

Danish Standards Foundation

DANSK DS/EN IEC 60645-3:2020 Electroacoustics – Audiometric equipment – Part 3: Test signals of short duration
DANSK DS/EN 60645-3:2007 Electroacoustics – Audiometric equipment – Part 3: Test signals of short duration

International Organization for Standardization (ISO)

ISO 3503:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes; Test of leakproofness under internal pressure when subjected to bending
ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD24-4-1990(R2002) Short Circuit Withstand Time Test Method
JEDEC JESD24-9-2002 Short Circuit Withstand Time Test Method

Türk Standardları Enstitüsü

TS 279-1965 CREEP AND TIME FOR RUPTURE TENS?ON TESTS ON METALLIC MATERIALS

European Committee for Standardization (CEN)

EN ISO 3503:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure of assemblies subjected to bending (ISO 3503:2015)

American Petroleum Institute (API)

API TR 17TR11-2015 Pressure Effects on Subsea Hardware During Flowline Pressure Testing in Deep Water (FIRST EDITION)