Measurement of Electrode Impedance

Measurement of Electrode Impedance, Total:137 items.

The international standard classification for "Measurement of Electrode Impedance" includes: Electrical engineering in general , Acoustics measurements and noise abatement in general .

The Chinese standard classification for "Measurement of Electrode Impedance" includes: Technical Management , Conductor and cable for electronic equipment , Electrical equipment and tool in general , Acoustic Measurement .

Professional Standard - Electron

SJ 20788-2000 Measurment method for thermal impedance of semiconductor diodes
SJ 2139-1982 Methods of measurement for dynamic impedance of silicon current regulator diodes
SJ 2148-1982 Methods of measurement for dynamic impedance of silicon current regulator transistors
SJ/Z 9010.9-1987 Measurements of electrical properties of electronic tubes and valves--Part 9: Methods of measuring the cathode-interface impedance
SJ 2534.14-1985 Test procedures for antennas-Measurement of impedances

Group Standards of the People's Republic of China

T/CSA 047-2019 Measurement Method for Real Thermal Resistance and Impedance of Light Emitting Diodes
T/ZHFCA 1002-2023 Impedance measurement method for proton exchange membrane fuel cell
T/QGCML 3251-2024 Light-emitting diode thermal impedance test method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17949.1-2000 Guide for measuring earth resistivity, ground impedance and earth surface potentials of a ground system - Part 1: Normal measurements
GB/T 18696.1-2004 Acoustics - Determination of sound absorption coefficient and impedance in impedance tubes - Part 1:Method using standing wave ratio
GB/T 12792-1991 Methods of measurement of impedance uniformity for radio-frequency cables

National Metrological Technical Specifications of the People's Republic of China

JJF 1771-2019 Program of Pattern Evaluation for Measuring Instruments of Aural Acoustic Impedance/Admittance

Taiwan Provincial Standard of the People's Republic of China

CNS 7012-1981 Method of Test for the Collector-Base Time Constant and for the Resistive Part of the Common-Emitter Input Impedance

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD24-12-2004 Thermal Impedance Measurement for Insulated Gate Bipolar Transistors (Delta VCE(on) Method) (This is an alternative method to JEDEC Standard No. 24-6)
JEDEC JESD24-6-1991 Thermal Impedance Measurements for Insulated Gate Bipolar Transistors Addendum to JEDEC JESD 24
JEDEC JESD51-51-2012 Implementation of the Electrical Test Method for the Measurement of Real Thermal Resistance and Impedance of Light-Emitting Diodes with Exposed Cooling
JEDEC JESD24-4-1990 Thermal Impedance Measurements for Bipolar Transistors (Delta Base- Emitter Voltage Method) Addendum to JEDEC JESD 24

American Society for Testing and Materials (ASTM)

ASTM F300-64(1987)e1 Test method for measuring cathode interface impedance characteristics of electron tubes
ASTM B457-13 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM B457-67(2003) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM B457-67(2008)e1 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM B457-67(2018) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM G59-97 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G59-97e1 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G59-97(2009) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G5-12 Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
ASTM B457-67(1998) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM G59-97(2003) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G59-97(2020) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G59-97(2014) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G57-95a(2001) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM G57-95A Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM G106-89(2004) Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements
ASTM B457-67(2013) Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum
ASTM G59-23 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G187-23 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM G57-20 Standard Test Method for Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM RR-G01-1022 2004 G0187- Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM G57-06(2012) Standard Test Method for Field Measurement of Soil Resistivity Using the Wenner Four-Electrode Method

Yugoslav Association for Standardization

JUS N.R1.112-1977 Electronic tubes. Measurements of the ekctrical properties. Methods of measuring electrode resistance, transconductance, amplification factor, conversion resistance and conversion transconductance
JUS N.B2.762-1990 Low voltage electrical installations. Verification of conditions for protection by automatic disconnection of supply, Measurement of earth electrode resistance
JUS N.A5.011-1983 Measurement of electrical resistance of solid insulating materials
JUS U.J6.225-1983 Acoustics in construction MEASUREMENT OF IMPEDANCE USING KUNT PIPES
JUS N.C0.035-1983 Tatting of insulatad conductors and cables. Measurement of electrical resistance of conductors.

Portuguese Institute of Quality

NP 2908-1987 Anodized aluminum. Inspection of coating. Measurement of electrical impedance or transmittance

The Directorate General of Specifications and Metrology (DGSM)

OS GSO IEC 60151-9:2014 Measurements of the electrical properties of electronic tubes and valves. Part 9: Methods of measuring the cathode-interface impedance
OS GSO IEC 60151-12:2014 Measurements of the electrical properties of electronic tubes and valves - Part 12: Methods of measuring electrode resistance, transconductance, amplification factor, conversion resistance and conversion transconductance

GCC Standardization Organization

GSO IEC 60151-9:2014 Measurements of the electrical properties of electronic tubes and valves. Part 9: Methods of measuring the cathode-interface impedance
GSO IEC 60151-12:2014 Measurements of the electrical properties of electronic tubes and valves - Part 12: Methods of measuring electrode resistance, transconductance, amplification factor, conversion resistance and conversion transconductance

International Electrotechnical Commission (IEC)

IEC 60151-9:1966 Mesures des caracterisiques electriques des tubes electroniques Partie 9: Methodes de mesure de l?impedance d?interface de cathode (Edition 1.0)
IEC 60151-12:1966 Measurements of the electrical properties of electronic tubes. Part 12 : Methods of measuring electrode resistance, transconductance,amplification factor, conversion resistance and conversion transconductance
IEC 61027:1991 Instruments for the measurement of aural acoustic impedance/admittance

German Institute for Standardization

DIN 41328-1:1968-01 Measurement of the transfer impedance of electrolytic capacitors
DIN 41328-1:1968 Measurement of the transfer impedance of electrolytic capacitors
DIN 41640-54:1988-10 Measuring methods and testing procedures for electromechanical components; test 23a: transfer impedance
DIN 4880 E:2024-11 Draft Document - Measurement method for determining the electrical forward resistance (through-plane) on bipolar plates

Czech Standards Institute (UNMZ)

CSN 35 8234 Cast.10-1988 Fixed capacitors. Impedance measurement method
CSN 35 8757 Cast.5-1985 Transistors. Method of measuring collector and emitter barrier layer capacltance
CSN 35 8737-1975 Semiconductor devices. Diodes. Measurement of differential rosistanoe
CSN 35 8748-1964 Transistors. Measurement of reaction impedance
CSN 35 8909-1962 Transistors. Measurement of reaction impedance
CSN 35 8912-1962 Transistors. Measurement of reaction impedance
CSN 35 8539-1968 Methods of testing anodě resistance of electronic tubes
CSN 83 2554-1986 Work safety. Antistatic footwear. The electric resistance and generál requirements for its measurement
CSN 62 1459-1958 Electrical impedance shock test
CSN 34 5615 Z3-1997 Electrical resistance to heat and flame resistance test

Spanish Association for Standardization (UNE)

AENOR UNE 20527-2:1971 Characteristic impedances and measurements of cables for radio frequencies.
UNE 20 527 h2 Impedance RF Cable Characteristics and Measurements
UNE 20527-2:1971 CHARACTERISTIC IMPEDANCES AND MEASURES OF RADIOELECTRIC FREQUENCIES CABLES
UNE 21136-16:1996 ELECTRICAL RELAYS. PART 16: IMPEDANCE MEASURING RELAYS.

International Organization for Standardization (ISO)

ISO 1853:1975 Conducting and antistatic rubbers; Measurement of resistivity
ISO 2931:1983 Anodizing of aluminium and its alloys; Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance
ISO 1853:1998 Conducting and dissipative rubbers, vulcanized or thermoplastic - Measurement of resistivity
ISO 2882:1979 Rubber, vulcanized; Antistatic and conductive products for hospital use; Electrical resistance limits
ISO 5821:2025 Resistance welding. Spot welding electrodes. Female electrode caps
ISO 2883:1980 Rubber, vulcanized; Antistatic and conductive products for industrial use; Electrical resistance limits

Swedish Institute for Standards

SS-EN ISO 2931:2018 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
SIS SS-ISO 2931:1984 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance
SIS SS 11 70 34-1980 Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance

Danish Standards Foundation

DS/ISO 1853:1980 Conducting and antistatic rubber. Measurement of resistivity
DS/ISO 2931:1988 Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance
DS/ISO 5184:1980 Straight resistance spot welding electrodes
DS/EN 61027:1994 Instruments for the measurement of aural acoustic impedance/admittance

Japanese Industrial Standards Committee (JISC)

JIS C 9325:2024 Electrode force measuring device for resistance welding equipment
JIS B 9915:1989 Measuring methods for dust resistivity (with parallel electrodes)
JIS C 9325:2009 Electrode force measuring device for resistance welding equipment

Magyar Szabványügyi Testület

MSZ 10906/8.lap-1964 Electrode tube power mark measurement mode. Internal resistance measurement
MNOSZ 1301-1952 Testing of resistance K, E and O poles
MSZ 11383/3-1987 Thermistor detection method to positive thermistor temperature coefficient

European Committee for Standardization (CEN)

EN ISO 2931:2018 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
EN ISO 2931:2010 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance

Swiss Association for Standardization (SNV)

SNV 81113-1942 Anodizing of aluminum and aluminum alloys. Evaluating the sealing quality of anodized films using admittance or impedance measurement methods

American National Standards Institute （ANSI)

ANSI/ASTM C384-1977 Impedance and Absorption of Acoustical Materials by the Impedance Tube Method
ANSI/ASTM C384-1985 Impedance and Absorption of Acoustical Materials by the Impedance Tube Method
ANSI/SCTE 50-2007 Test Procedure for Measuring Regularity of Impendance of Coaxial Cable

South African Bureau of Standard

SANS 2931:1983 Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxide coatings by measurement of admittance or impedance

Gosstandart of Russia

GOST 20398.13-1980 Field-effect transistors. Drain source resistance measurement technique
GOST R 71444-2024 Electro-optical elements. Method of measuring electrical resistance between electrodes
GOST 18604.10-1976 Transistors bipolar. Input resistance measurement technique
GOST IEC 60255-16-2013 Electrical relais. Part 16. Impedance measuring relais
GOST 19656.15-1984 Semiconductor UHF diodes. Measurement methods of thermal resistance and pulse thermal resistance
GOST 18720.18-1985 Television camera tubes. Methods of measuring insulation resistance and leakage cuvvent between electrodes

Türk Standardları Enstitüsü

TS 3180-1978 ANODIZIN OF ALUMINIUM AND ITS ALLOYS - ASSESS MENT OF QUALITY OF SEALED ANODIC OXIDE COATINGS BY MEASUREMENT OF ADMITTANCE OR IMPEDANCE
TS 2449-1976 MEASUREMENTS OF THE ELECTRICAL PROPERTIES OF ELECTRONIC TUBES AND VALVES PART 9 : METHODS OF MEASURING THE CATHODE-INTERFACE IMPEDANCE
TS 2734-1977 Conducting Ind Intistatic Rubbers - Measurement Of Resistivity

Korean Agency for Technology and Standards (KATS)

KS D 8503-2020 Measurement methods of polarization resistance of copper alloy tubes for condenser
KS F 2736-2005 Testing method for polarization resistance of reinforcing bar in concrete
KS C IEC 60255-16-2020 Electrical relays－Part 16：Impedance measuring relays
KS C IEC 60255-16:2005 Electrical relays － Part 16: Impedance measuring relays
KS C IEC 60255-16-2005(2025) Electrical relays — Part 16: Impedance measuring relays
KS C IEC 60255-16-2005(2020) Electrical relays－Part 16：Impedance measuring relays
KS D 8503-2015(2020) Measurement methods of polarization resistance of copper alloy tubes for condenser
KS D 8503-1995 Measurement methods of polarization resistance of copper alloy tubes for condenser
KS D 8503-2015 Measurement methods of polarization resistance of copper alloy tubes for condenser
KS B ISO 5184:2002 Straight resistance spot welding electrodes

Ente Nazionale Italiano di Unificazione

UNI 8446:1983 Anodizing of aluminium and aluminium alloys. Assessment of sealing quality by measurement of admittance or impedance.
UNI EN ISO 10534-1:2001 Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Method using standing wave ratio
UNI EN ISO 5821:2010 Resistance welding - Spot welding electrode caps

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 81-1983 Guide for measuring earth resistivity, ground impedance, and earth surface potentials of a ground system
IEEE Std 81-2012 IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System
IEEE 81-2012 IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System
IEEE P81/D11, August 2012 IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System
IEEE Std 81-1983 IEEE Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Ground System Part 1: Normal Measurements
IEEE P81 IEEE Draft Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System
IEEE P81/D10, March, 2012 IEEE Draft Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System
IEEE P81/D2, December 2023 IEEE Draft Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Grounding System

Association Francaise de Normalisation

NF EN 60645-5:2005 Electroacoustics - Audiometric equipment - Part 5: instruments for measuring aural impedance or admittance (impedance meters or admittance meters)
NF X15-113:1997 Measurement of relative air humidity - Impedance variation hygrometer (capacitive and resistive)
NF C97-615:1993 Instruments for the measurement of aural acoustic impedance/admittance.
NF A82-104-3*NF EN ISO 5821:2025 Resistance welding - Spot welding electrodes - Female electrode caps

Indonesia Standards

SNI 04-6186.16-2000 Electrical relays. Part 16: Impedance measuring relays

Polski Komitet Normalizacyjny (PKN)

PN T01504 ArkusZ26-1974 Transistors Measurement of base resistance at high frequency rbb
PN T01504-67-1987 Diodes Measuring methods Series equivalent resistance

Belgian Standards Institute

NBN-EN 60051-6-1994 Direct acting indicating analogue electrical measuring instruments and their accessories Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters

British Standards Institution (BSI)

BS 6161-6:1984 Methods of test for anodic oxidation coatings on aluminium and its alloys-Assessment of sealing quality by measurement of admittance or impedance
BS ISO 17657-1:2006 Resistance welding - Welding current measurement for resistance welding - Guidelines for measurement
BS ISO 17657-1:2005 Resistance welding. Welding current measurement for resistance welding. Guidelines for measurement

Others: Measurement of AC Impedance,Measurement of Impedance,Guidelines for Soil Resistivity, Ground Impedance, and Ground Potential Measurements for Grounding Systems,Standard test method for measuring dielectric breakdown voltage of insulating oils derived from petroleum by vde electrodes,Standard Practice for Validation of Algorithms and Equipment for Electrochemical Impedance Measurements,The resistance of the gold electrode,Glass in building - Glazing and air insulation - Measurement of mechanical impedance of laminated glass,Measurement of the reference electrode,How to Measure the Impedance of the Entire Instrument,Measurement of Electrode Resistance,Measurement of Electrode Impedance,Measuring the impedance of a circuit,Measurement of characteristic impedance,What is the impedance of the electrodes?,How to Measure the Impedance of a Meter