Air Duct Pressure Measurement

Air Duct Pressure Measurement, Total:328 items.

The international standard classification for "Air Duct Pressure Measurement" includes: Pipeline components and pipelines , Anaesthetic, respiratory and reanimation equipment .

The Chinese standard classification for "Air Duct Pressure Measurement" includes: Pressure vessel , Surgery devices .

Group Standards of the People's Republic of China

T/CSEE 0070-2018 Guidelines for Supervision and Testing of Compressed Air Quality in Thermal Power Plants
T/CNIA 0236-2024 Aluminum alloy hot extruded round tube for compressed air pipe

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 34275-2017 Pressure piping code―Long-distance pipeline
GB/T 38942-2020 Pressure piping code—Utility piping
GB/T 34275-2024 Pressure piping code—Transmission pipeline
GB/T 20801.1~6-2020 Pressure piping specification for industrial piping (6 volumes in total)
GB/T 32270-2015 Pressure piping code―Power piping
GB/T 32270-2024 Pressure piping code—Power piping
GB/T 44059.1-2024 Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum

Professional Standard - Petroleum

SY/T 7344-2016 Specifications of UAV aerophotogrammetry for oil and gas pipeline project

Anhui Provincial Standard of the People's Republic of China

DB34/T 727-2018 Inspection regulations for urban natural gas buried steel pressure pipelines (direct detection)

Indonesia Standards

SNI 05-6324-2000 Colour coding of pressure pipes, air pipes and liquid pipes

Finnish Standards Institute

SFS 2897-1980 Natural Gas Pipeline. pressure test
SFS 3179-1983 Natural Gas Pipeline. Pipes and equipment used. The operating pressure does not exceed 4 bar
SFS 2350 S-1968 Asbestos-cement pipes and fittings for pressure pipelines; methods of tests and quality requirements

American Water Works Association (AWWA)

AWWA JAW60137 Pressure Surges in Pipeline Systems Resulting from Air Releases
AWWA DSS71319 Understanding the Pressure Versus Flow Relationship for Pipe Leaks

US Federal Contractor Registration (USFCR)

FCR UFGS-43 15 00.00 20-2006 LOW PRESSURE COMPRESSED AIR PIPING (NON-BREATHING AIR TYPE)
FCR UFGS-22 15 26.00 20-2006 HIGH AND MEDIUM PRESSURE COMPRESSED AIR PIPING
FCR UFGS-22 15 13.16 40-2014 HIGH-PRESSURE COMPRESSED-AIR PIPING, PIPING COMPONENTS, AND VALVES, STAINLESS
FCR FED H-08-4 VOL 3 SEC III 717-1993 COMPRESSED AIR SYSTEM - STANDARD PIPING DIAGRAM
FCR FED H-08-4 VOL 3 SEC II 610.7-1988 DUCT PRESSURE CLASSES
FCR COE RPMAS 66270-1977 PRESSURE TESTING OF GAS LINES
FCR UFGS-40 17 26.00 20-2006 WELDING PRESSURE PIPING
FCR COE CE 1406 AMENDMENT 1-1966 WELDED POWER PENSTOCKS AND SURGE TANKS
FCR COE CE 1406-1963 WELDED POWER PENSTOCKS AND SURGE TANKS
FCR UFGS-07 05 23-2014 PRESSURE TESTING AN AIR BARRIER SYSTEM FOR AIR TIGHTNESS

Ente Nazionale Italiano di Unificazione

UNI 4675:1961 Manometers and pressure and vacuum gages. Removable ducting.
UNI 5336:1963 Cast iron pipes for pressure pipelines - Quality, requirements and tests
UNI ISO 9110-2:1994 Hydraulic fluid power. Measurement techniques. Measurement of average steady-state pressure in a closed conduit.
UNI ISO 9110-2:2022 Hydraulic fluid power -- Measurement techniques - Part 2: Measurement of average steady-state pressure in a closed conduit
UNI 11024:2017 Quality requirements for welding of polyethylene pipes for gas, water and other pressure fluids pipelines
UNI 7527-2:1976 Lead tubes. Tubes for pressure applications.
UNI EN ISO 10524-2:2006 Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators
UNI EN ISO 7235:2009 Acoustics - Laboratory measurement procedures for ducted silencers and air- terminal units - Insertion loss, flow noise and total pressure loss
UNI 1283-1967 pipeline. Nominal pressure
UNI 4675-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. removable channel
UNI EN 12350-7:2022 Testing fresh concrete - Part 7: Air content - Pressure methods
UNI EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
UNI EN ISO 7396-1:2013 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
UNI EN ISO 7396-1:2019 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
UNI EN ISO 7396-1:2010 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
UNI EN 12350-7:2009 Testing fresh concrete - Part 7: Air content - Pressure methods
UNI EN 12350-7:2019 Testing fresh concrete - Part 7: Air content - Pressure methods
UNI 4676-1961 Pressure gauge, vacuum gauge and vacuum pressure gauge. Connecting pipe

Danish Standards Foundation

DANSK DS/ISO 22073-1:2024 Gas welding equipment – Part 1: Line pressure regulators and line pressure regulators with flow-metering devices for gas distribution pipelines up to 6 MPa (60 bar)
DANSK DS/ISO 23431:2021 Measurement of road tunnel air quality
DS/ISO 23431:2021 Measurement of road tunnel air quality
DS/EN ISO 7235:2009 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss
DS/EN ISO 7396-1/A2:2010 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
DANSK DS/EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
DS/EN 12350-7:2013 Testing fresh concrete - Part 7: Air content - Pressure methods
DANSK DS/EN ISO 7396-1/A1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
DS/EN ISO 7396-1:2007 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
DANSK DS/EN 12350-7:2019 Testing fresh concrete – Part 7: Air content – Pressure methods

Belgian Standards Institute

NBN I-888-1968 Concrete sewer pipes. Measurement of internal pressure
NBN D 11-203 Central heating, ventilation and air conditioning, acceptance testing of installations, testing of sealing properties and mechanical endurance of duct systems by compressed air
NBN-EN 286-3-1994 Use air or nitrogen in pressure vessels that are not easily affected by heat. Part 3: Steel pressure vessels for compressed air braking equipment and pneumatic auxiliary devices for rail vehicles

United States Department of Veterans Affairs (VA)

VA 22 61 13.74-2009 DENTAL COMPRESSED-AIR PIPING

Spanish Association for Standardization (UNE)

UNE 100-152-1988 Air conditioning. Pipe bearing capacity
UNE-EN 737-3:1999 MEDICAL GAS PIPELINE SYSTEMS - PART 3: PIPELINES FOR COMPRESSED MEDICAL GASES AND VACUUM
UNE 60311:2022 Gas supply pipelines for maximum operating pressure up to and including 5 bar.
UNE-EN 12350-7:2010 Testing fresh concrete - Part 7: Air content - Pressure methods
UNE-EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016)
UNE-EN 12350-7:2001 Testing fresh concrete - Part 7: Air content - Pressure methods.
UNE 60311:2022/1M:2023 Gas supply pipelines for maximum operating pressure up to and including 5 bar.
UNE 100705:1991 AIR CONDITIONING. MEASURE OF THE VOLUME FLOW AIR IN GRILLES OR DIFFUSERS. METHOD OF THE PRESSURE COMPENSATION.
UNE-EN 12350-7:2020 Testing fresh concrete - Part 7: Air content - Pressure methods
UNE-EN 12350-7:2020/AC:2022 Testing fresh concrete - Part 7: Air content - Pressure methods
UNE 19 002 pipeline. Pressure segment setting. Rated pressure; working pressure; test pressure
UNE 60670-8:2014 Gas installations pipework supplied at maximum operating pressure (MOP) up to and including 5 bar. Part 8: Pressure tightness tests for receiving installation pipework
UNE 60311:2015 Gas supply pipelines for maximum operating pressure up to and including 5 bar.

Czech Standards Institute (UNMZ)

CSN 39 5301-1994 Ballistic measuring devices. Pressure measuring barrels. Technical requirements
CSN ISO 6953-1:1993 Pneumatic fluid power. Air line pressure regulators. Part 1: Main characteristics to be included in commercial literature and specific requirements
CSN 44 9130-1950 Compressed air connecting pipe. Rated pressure 10
CSN 05 1161-1985 Pressure test on welded joints of pipeline and pressure vessels from plastics
CSN 66 8079-1971 Determination of pressure in air blast waves
CSN 50 0401-1994 Filter papers. Determination of air pressure drop
CSN 25 7072-1987 Pressure gauges. Flexible manometric elements of manometers, pressure-va-cuum gauges and vacuum meters. General technical requirements and test methods
CSN 38 6410 Z5-1998 Natural gas pipelines and connectors with very high pressure

Korean Agency for Technology and Standards (KATS)

KS I ISO 5221-2013 Air distribution and air diffusion－Rules to methods of measuring air flow rate in an air handling duct
KS I ISO 5221-2007(2012) Air distribution and air diffusion－Rules to methods of measuring air flow rate in an air handling duct
KS R ISO 3583-2023 Road vehicles－Pressure test connection forcompressed-air pneumatic braking equipment
KS B 5239-2002 Flow type air gauges
KS I ISO 7235-2020 Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss,flow noise and total pressure loss
KS R ISO 3583-2003(2018) Road vehicles－Pressure test connection forcompressed-air pneumatic braking equipment
KS I ISO 7235:2020 Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss,flow noise and total pressure loss
KS F 2421-2006 Method of test for air content of fresh concrete by pressure method
KS B ISO 9110-2-2006(2011) Hydraulic fluid power － Measurement techniques － Part 2: Measurement of average steady-state pressure in a closed conduit
KS F 2417-1991 METHOD OF TEST FOR AIR CONTENT OF FRESH CONCRETE BY THE PRESSURE METHOD (AIR RECEIVER METHOD)
KS R ISO 3583-2003(2023) Road vehicles－Pressure test connection forcompressed-air pneumatic braking equipment
KS P ISO 7396-1-2024 Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 3583:2007 Road vehicles -- Pressure test connection for compressed-air pneumatic braking equipment
OS GSO ISO 9110-2:2015 Hydraulic fluid power -- Measurement techniques -- Part 2: Measurement of average steady-state pressure in a closed conduit
OS GSO ISO 6953-3:2016 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
OS GSO ISO 7396-1:2016 Medical gas pipeline systems -- Part 1: Pipeline systems for compressed medical gases and vacuum
OS GSO EN 12350-7:2010 Testing fresh concrete - Part 7 : Air content - Pressure methods

British Standards Institution (BSI)

BS ISO 9110-2:2020 Hydraulic fluid power. Measurement techniques - Measurement of average steady-state pressure in a closed conduit
BS EN 738-2:1999 Pressure regulators for use with medical gases - Manifold and line pressure regulators
BS ISO 22073-1:2024 Gas welding equipment - Line pressure regulators and line pressure regulators with flow-metering devices for gas distribution pipelines up to 6 MPa (60 bar)
BS EN 737-3:2000 Medical gas pipeline systems - Pipelines for compressed medical gases and vacuum
2G 113-1956 Specification for manifold pressure gauges for aircraft
BS EN ISO 7396-1:2007 Medical gas pipeline systems. Pipeline systems for compressed medical gases and vacuum
BS EN ISO 7396-1:2007+A2:2010 Medical gas pipeline systems - Pipeline systems for compressed medical gases and vacuum
BS EN ISO 7396-1:2016 Medical gas pipeline systems. Pipeline systems for compressed medical gases and vacuum
BS EN ISO 7396-1:2007+A3:2013 Medical gas pipeline systems - Pipeline systems for compressed medical gases and vacuum
BS EN 14067-3:2003 Railway applications. Aerodynamics. Aerodynamics in tunnels
BS EN 14067-3:2003(2011) Railway applications. Aerodynamics. Aerodynamics in tunnels
BS EN ISO 7396-1:2016+A1:2019 Medical gas pipeline systems. Pipeline systems for compressed medical gases and vacuum
BS ISO 23431:2021 Measurement of road tunnel air quality
24/30483101 DC BS ISO 22073-1 Gas welding equipment - Part 1: Line pressure regulators and line pressure regulators with flow-metering devices for gas distribution pipelines up to 60 bar (6 MPa)
ASME B31.8-2025 Gas Transmission and Distribution Piping Systems - ASME Code for Pressure Piping, B31
19/30371854 DC BS ISO 9110-2. Hydraulic fluid power. Measurement techniques. Part 2. Measurement of average steady-state pressure in a closed conduit
BS 6069-4.3:1992 Characterization of air quality. Stationary source emissions-Method for the manual gravimetric determination of concentration and mass flow rate of particulate material in gas-carrying ducts
BS EN ISO 3459:2022 Plastic piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under negative pressure
BS AU 163a:1985 Specification for pressure test connection for compressed-air pneumatic braking equipment for road vehicles
BS EN 13016-1:2018 Liquid petroleum products. Vapour pressure. Determination of air saturated vapour pressure (ASVP) and calculated dry vapour pressure equivalent (DVPE)
BS 726:1937 Measurement of air flow and the free air delivered by compressors
20/30382325 DC BS ISO 23431. Measurement of road tunnel air quality
BS 1042-1.6:1993 Measurement of fluid flow in closed conduits - Pressure differential devices: Part 1.6 Method of measurement of pulsating fluid flow in a pipe, by means of orifice plates, nozzles or Venturi tubes

Magyar Szabványügyi Testület

MSZ 10906/18.lap-1966 Electrical pipelines. Power mark measurement mode. Network power pipeline measurement
MSZ 2970/2-1985 Steel pipeline stability calculation. Pressure measurement inside individual pipes
MNOSZ 2909-1953 Pipe hollow edge surface pressure 64
MSZ KGST 2407-1980 Access specifications for cylindrical room pressure of air pressure gauges, vacuum pressure gauges, and vacuum gauges
MSZ 10906/22-1969 Electrical pipeline power mark measurement mode. glow pipe
MSZ KGST 3579-1982 Cutting specifications for air pressure gauges, vacuum pressure gauges, and vacuum gauges for corner room pressures
MSZ KGST 1855-1979 Air pressure gauges, vacuum pressure gauges, counting tables and proportional tables for vacuum gauges
MSZ 11128-1967 Air flow (gas) transportation equipment pipeline transportation
MNOSZ 11202-1952 Information pipe pressure gauge, template for measuring vacuum meters in nominal diameters of (80, 100, 150, (200) and 340 mm)
MSZ 10906/25-1972 Electrical pipelines. Electrical mark measurement mode. Non-electrical measurements
MNOSZ 85-1952 Cast iron pressure pipe muffle rated pressure 10

German Institute for Standardization

DIN 21639:1999 Power assisted air gates - Travel-way air locks - Type doors with pressure
DIN 86001:2010-09 Pipelines on ships - Pressure ratings, pressure tests
DIN 86001 E:2007-07 Pipelines on ships - Pressure ratings, pressure tests
DIN 86001 E:2007 Draft Document - Pipelines on ships - Pressure ratings, pressure tests
DIN 38030:2001 Compressed air equipment for rail vehicles - Pressure gauges
DIN 28417:1976 Vacuum technology; measurement of throughput by the volumetric method at constant pressure
DIN 1262:1977 Lead pipes for pressure pipes
DIN EN 737-3:2000 Medical gas piping systems Part 3: Compressed medical gas and vacuum piping
DIN V 2401-2:1966 Pressure rating and service pressure of iron pipe fittings for pressure pipelines
DIN 4279-3:1990 Internal pressure testing of water pipes, pipe pressure testing of cast iron pressure pipes and steel pipes with cement mortar lining
DIN ISO 3583:1987-05 Road vehicles; pressure test connection for compressed-air pneumatic braking equipment; identical with ISO 3583, edition 1984
DIN EN 12350-7:2019 Testing fresh concrete - Part 7: Air content - Pressure methods
DIN EN ISO 7396-1:2019-06 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016 + Amd 1:2017); German version EN ISO 7396-1:2016 + A1:2019
DIN 28629:1990 Cast iron pipe fittings and double elbows for gas and water pressure pipes
DIN EN 14067-3:2003 Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels; German version EN 14067-3:2003
DIN EN 12350-7:2019-09 Testing fresh concrete - Part 7: Air content - Pressure methods
DIN 86001:2010 Pipelines on ships - Pressure ratings, pressure tests
DIN 86001:1997-01 Pipelines on ships - Pressure ratings, tests
DIN 74060-10:1988-01 Air braking systems; air-pressure cylinder; brake chamber, method of measurement of the output-force over the stroke
DIN 28632:1990 Cast iron pipe fittings and pressure pipes
DIN EN ISO 7396-1:2007 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2007); German version EN ISO 7396-1:2007
DIN EN ISO 7396-1 A3 E:2011-09 Medical gas piping systems Part 1: Piping systems for compressed medical gases and vacuum
DIN EN 12097:2006 Ventilation for buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems; English version of DIN EN 12097:2006-11
DIN EN 12350-7:2022-05 Testing fresh concrete - Part 7: Air content - Pressure methods; German version EN 12350-7:2019 + AC:2022

GCC Standardization Organization

GSO ISO 3583:2007 Road vehicles -- Pressure test connection for compressed-air pneumatic braking equipment
GSO ISO 9110-2:2015 Hydraulic fluid power -- Measurement techniques -- Part 2: Measurement of average steady-state pressure in a closed conduit
GSO ISO 6953-3:2016 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
GSO OIML R97:2010 Barometers
BH GSO ISO 3583:2024 Road vehicles -- Pressure test connection for compressed-air pneumatic braking equipment
GSO ISO 7396-1:2016 Medical gas pipeline systems -- Part 1: Pipeline systems for compressed medical gases and vacuum
GSO ISO 7967-4:2013 Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 4: Pressure charging and air/exhaust gas ducting systems
GSO ISO 1608-2:2009 Vapour vacuum pumps - Measurement of performance characteristics - Part 2: Measurement of critical backing pressure

Swedish Institute for Standards

SS-ISO 3583:1986 Road vehicles - Pressure test connection for compressed-air pneumatic braking equipment
SS-ISO 7635:1992 Road vehicles - Air or air over hydraulic brakingsystems - Measurement of braking performance
SIS SS-ISO 5220:1988 Air distribution and air diffusion — Aero- dynamic testing and rating of constant and variable dual or single duct boxes and single duct units
SS-EN 737-3:1999 Medical gas pipeline systems - Part 3: Pipelines for compressed medical gases and vacuum
SIS SS 13 71 11-1978 Concrete testing — Fresh concrete — Percentage of air by pressure method
SIS SS 13 71 24-1989 Concrete testing — Fresh concrete — Air content (pressure method)
SS-ISO 9110-2:2005 Hydraulic fluid power - Measurement techniques - Part 2: Measurement of average steady-state pressure in a closed conduit (ISO 9110-2:1990, IDT)
SIS SMS 1292-1968 Fittings for piping. Sluice valves. Stems. Nominal pressure 10 kgf/cm" above atmospheric
SS-EN 12350-7:2000 Testing fresh concrete - Part 7: Air content - Pressure methods
SS-EN 12350-7:2009 Testing fresh concrete - Part 7: Air content - Pressure methods
SS-EN 12350-7:2019 Testing fresh concrete - Part 7: Air content - Pressure methods
SIS SMS 1290-1968 Fittings for piping. Sluice valves. Wedges. Nominal pressure 10 kgf/cnr above atmospheric
SIS SMS 1298-1968 Fittings for piping. Sluice valves. Gasteets Nominal pressure 10 kgf/cm* above atmospheric
SIS SMS 1230-1975 Pipeline systems. Nominal pressure, PN. Working pressure. Test pressure

National Aeronautics and Space Administration (NASA)

NASA UFGS-22 15 13.16 40-2011 HIGH-PRESSURE COMPRESSED-AIR PIPING, PIPING COMPONENTS, AND VALVES, STAINLESS

Standards Norway

NS 4862:1985 Air quality - Emission measurements - Measurement of gas flow in stacks and ducts using Pitot static tubes
NS-EN 737-3:1998 Medical gas pipeline systems — Part 3: Pipelines for compressed medical gases and vacuum
NS 4863:1985 Air quality - Emission measurements - Concentration of total dust in stacks and ducts
NS 6238-1982 Marine industry - Air, sounding and filling pipes - Pipe connections with flanges for air pipes
NS-EN 12350-7:2019 Testing fresh concrete — Part 7: Air content — Pressure methods
NS-EN 12350-7:2000 Testing fresh concrete — Part 7: Air content — Pressure methods
NS-EN 12350-7:2009 Testing fresh concrete — Part 7: Air content — Pressure methods

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 2885.5:2012 Pipelines - Gases and Liquid Petroleum - Field Pressure Testing
AS/NZS 2885.5:2002 Pipelines-Gas and liquid petroleum - Field pressure testing

Swiss Association for Standardization (SNV)

SN ISO 105/X09:1984 pipeline. Ferrous metal piping notes and guidelines. Rated pressure; working pressure; test pressure

Standard Association of Australia （SAA）

AS 1978:1987 Pipelines—Gas and Liquid Petroleum—Field Pressure Testing
AS 4041:2006 Pressure piping
AS 4041:1998 Pressure piping
AS 4041:2006(R2016) Pressure piping
AS 1978:1977 Rules for the field pressure testing of gas and liquid petroleum land or submarine pipelines known as the SAA Code for Field Pressure Testing of Pipelines
AS 4041:1992 Pressure piping
AS A145:1965 Centrifugally cast iron pressure pipes for water, gas and sewage
AS 2360.1.2:1993 Measurement of fluid flow in closed conduits - Pressure differential methods - Measurement using orifice plates or nozzles - Conduits with diameters less than 50 mm
AS A145:1970 Centrifugally cast iron pressure pipes for water, gas and sewage
AS 2360.1.1:1993 Measurement of fluid flow in closed conduits - Pressure differential methods - Measurement using orifice plates, nozzles or Venturi tubes - Conduits with diameters from 50 mm to 1200 mm
AS 2885.5:2020/Amdt 1:2022 Pipelines — Gas and liquid petroleum, Part 5: Field pressure testing
AS 2885.5:2020 Pipelines — Gas and liquid petroleum, Part 5: Field pressure testing
AS CB18.1 INT 1:1971 Design, fabrication, installation and inspection of pressure piping (known as the SAA Pressure Piping Code) - Interpretations to SAA Pressure Piping Code No 1 (October 1971) - Application of AS 1074 pipe for pressure piping
AS A88.1:1970 Cast iron non-pressure pipes
AS 4130(INT):1993 PE pipes, pressure applications
AS 4058:1992 Precast concrete pipes (pressure and non-pressure)
AS B162:1960 Measurement of air flow for compressors and exhausters

Polski Komitet Normalizacyjny (PKN)

PN M73008-02-1993 Hydraulic fluid power. Measurement techniques. Part 2: Measurement of average steady-state pressure in a closed conduit
PN B02711-1990 Canalisation Continuing measurements of volumetric rate of flow in non pressure sewerage pipes Desing principles
PN M01503-04-1993 Reciprocating internal combustion engines. Vocabulary of components and systems. Part 4: Pressure charging and air/exhaust gas ducting systems

American Society for Testing and Materials (ASTM)

ASTM D2513-03b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D2513-03 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D2513-03a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM F1041-20 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
ASTM F1041-02(2016) Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
ASTM C1618-05 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
ASTM D2513-06b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D2513-06a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D2513-06 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM F2786-16(2021) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)
ASTM F2945-15 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
ASTM F2945-18 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
ASTM C1618M-19 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure (Metric)
ASTM F2785-18 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
ASTM F1041-02 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
ASTM F1041-02(2008) Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
ASTM F2785-20e1 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
ASTM F2785-20 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
ASTM F2785-18a Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
ASTM D2513-11e1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D2513-11 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
ASTM D2513-07 Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D2513-07b Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
ASTM D2513-07a Standard Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings

Military Standards (MIL-STD)

DOD A-A-54985-1994 VALVE KIT, OXYGEN, POSITIVE AND EXPIRATORY PRESSURE

Deutsche Vereinigung des Gas- und Wasserfachs

DVGW W 406 A E:2010-07 Volume and flow measurement of cold drinking water in pressurized pipelines
DVGW W 406:2003-12 Measurement of flow and volume of cold drinking water in pressure pipelines
DVGW G 463 E:2015-06 High Pressure Gas Steel Pipelines for a Design Pressure of more than 16 bar
DVGW G 409:2020-09 Conversion of High Pressure Gas Steel Pipelines for a Design Pressure of more than 16 bar for Transportation of Hydrogen
DVGW G 459-2:2015-11 Pressure regulation and design flow requirements of gas pressure regulating devices in access pipelines
DVGW G 498 E:2021-03 Pressure vessels in pipelines and systems for the pipeline bound supply of gas to the general public
DVGW G 469 E:2007-12 Pressure testing of gas transportation and distribution pipelines
DVGW G 462 E:2012-07 Steel pipe natural gas pipeline 16 bar working pressure installation
DVGW G 472 E:2018-11 Gas pipework made of plastic pipes for an operating pressure up to and including 16 bar
DVGW G 463A:2016-07 Technical specification for construction of high pressure gas steel pipe transmission pipeline
DVGW G 472:2020-03 Gas Pipework made of Plastic Pipes for an Operating Pressure up to and including 16 bar
DVGW G 465-1:1997-11 Check gas pipeline network (maximum operating pressure 4 bar)
DVGW G 462:2020-03 Gas Pipework made of Steel Pipes for an Operating Pressure up to and including 16 bar
DVGW G 462 E:2003-04 Steel pipe natural gas pipeline construction to 16 bar working pressure

Japanese Industrial Standards Committee (JISC)

JIS B 9939-2:2003 Hydraulic fluid power -- Measurement techniques -- Part 2: Measurement of average steady-state pressure in a closed conduit
JIS B 8368:1999 Pneumatic cylinders
JIS A 1128:1993 Method of test for air content of fresh concrete by pressure method
JIS B 8372-3:2022 Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 3: Alternative test methods for measuring the flow-rate characteristics of pressure regulators
JIS B 8317-2:1999 Vapour vacuum pumps -- Measurement of performance characteristics -- Part 2: Measurement of critical backing pressure

GM North America

GM GM6259M-2000 Low Pressure Air Injection Reactor Tubing (Revision B)

International Organization for Standardization (ISO)

ISO 9110-2:2020 Hydraulic fluid power — Measurement techniques — Part 2: Measurement of average steady-state pressure in a closed conduit
ISO 23431:2021 Measurement of road tunnel air quality
ISO 22073-1:2024 Gas welding equipment — Part 1: Line pressure regulators and line pressure regulators with flow-metering devices for gas distribution pipelines up to 6 MPa (60 bar)
ISO 3583:1982 Road vehicles — Pressure test connection for compressed-air pneumatic braking equipment
ISO 7396-1:2002 Medical gas pipeline systems - Part 1: Pipelines for compressed medical gases and vacuum
ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum
ISO/DIS 22484 Displacement and dynamic compressors — Performance test code for electric driven low-pressure air compressor packages

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 9110-2:2016 Hydraulic fluid power -- Measurement techniques -- Part 2: Measurement of average steady-state pressure in a closed conduit
BH GSO ISO 7396-1:2017 Medical gas pipeline systems -- Part 1: Pipeline systems for compressed medical gases and vacuum

Bureau of Indian Standards

IS 15181-2-2024 Hydraulic Fluid Power - Measurement Techniques - Part 2 Measurement of Average Steady-State Pressure in a Closed Conduit
IS 1538-1993 Cast iron fittings for pressure pipes for water, gas and sewage
IS 11639 Pt.1-1986 Design standards for pressure piping structures Part 1 Surface pressure piping
IS 18466-1-2024 Medical Gas Pipeline Systems - Part 1 Pipeline Systems for Compressed Medical Gases and Vacuum
IS 9523-2000 Ductile Iron Fittings for Pressure Pipes for Water, Gas and Sewage

Society of Automotive Engineers (SAE)

SAE MAM2604A-1988 PRESSURE TESTING, AIR 275 kPa
SAE MAM2601A-1988 PRESSURE TESTING, AIR 70 kPa

American Association of State Highway and Transportation Officials

AASHTO T 152-2023 Air Content of Freshly Mixed Concrete by the Pressure Method

Türk Standardları Enstitüsü

TS 2901-1977 (DETERMINATION OF AIR CONTENT OF FRESH CONCRETE BY THE PRESSURE METHOD)

Gosstandart of Russia

GOST 31329-2006 Noise. Measurement of airborne sound emitted by vessels on inland waterways and harbours
GOST R 57814-2017 Testing fresh concrete. Part 7. Air content. Pressure methods
GOST R ISO 7396-1-2011 Medical gas pipeline systems. Part 1. Pipeline systems for compressed medical gases and vacuum
GOST 32969-2014 Ducted air-conditioners and air-to-air heat pumps. Testing and rating for performance

Underwriter Laboratories of Canada (ULC)

CAN/ULC-S110-13(2018) Air Duct Testing Methods
ULC CAN-S110-2013(R2018) STANDARD METHODS OF TEST FOR AIR DUCTS

Association Francaise de Normalisation

NF X43-234*NF ISO 23431:2021 Measurement of road tunnel air quality
NF S95-155:2000 Medical gaz pipeline systems - Part 3 : pipelines for compressed medical gases and vacuum.
NF S95-155:2007 Medical gas pipeline systems - Part 1 : pipelines for compressed medical gases and vacuum.
NF ISO 22073-1:2024 Gas welding equipment - Part 1: Line pressure regulators and line pressure regulators with flow-metering devices for gas distribution pipelines up to 6 MPa (60 bar)
NF ISO 23431:2021 Measuring the air quality of a road tunnel
NF S31-127*NF EN ISO 7235:2009 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss
NF ISO 6953-3:2012 Pneumatic transmissions - Compressed air pressure regulators and filter regulators - Part 3: alternative test methods for measuring the flow characteristics of pressure reducing valves
NF P18-431-7*NF EN 12350-7:2019 Testing fresh concrete - Part 7 : air content - Pressure methods
NF S95-155-1*NF EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1 : pipeline systems for compressed medical gases and vacuum
NF F17-020-3*NF EN 14067-3:2004 Railway applications - Aerodynamics - Part 3 : aerodynamics in tunnels.
NF R12-650:1984 Road vehicles - Pressure test for compressed air pneumatic braking system

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE OR-05-13-1-2005 Detecting Critical Supply Duct Pressure

European Committee for Standardization (CEN)

EN 737-3:1998 Medical Gas Pipeline Systems - Part 3: Pipelines for Compressed Medical Gases and Vacuum
PREN 12350-7-2017 Testing fresh concrete - Part 7: Air content - Pressure methods
EN 14067-3:2003 Railway applications - Aerodynamics - Part 3: Aerodynamics in tunnels
EN 737-3:1998/PRA1:1999 AMD A1 Medical Gas Pipeline Systems - Part 3: Pipelines for Compressed Medical Gases and Vacuum
EN ISO 7396-1:2016 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (Incorporates Amendment A1: 2019)
EN 286-3:1994 Simple unfired pressure vessels designed to contain air or nitrogen - Part 3: Steel pressure vessels designed for air braking equipment and auxiliary pneumatic equipment for railway rolling stock

CN-STDBOOK

图书 3-9932 Pressure Piping Code for Industrial Piping

South African Bureau of Standard

SANS 7396-1:2009 Medical gas pipeline systems Part 1: Pipeline systems for compressed medical gases and vacuum
SANS 6252:2006 Concrete tests - Air content of freshly mixed concrete - Pressure method

National Association of Corrosion Engineers (NACE)

NACE Paper 05548-2015 Corrosion of Sprinkler Piping Under Compressed Nitrogen and Air Supervision

National Standardisation Body (ASRO)

STAS 2250-1973 Pipe components NOMINAL PRESSURES, TEST PRES- SURES AND MAXIMUM ADMISSI- BLE WORKING PRESSURES

American Petroleum Institute (API)

API RP 1110-1997 Pressure Testing of Liquid Petroleum Pipelines (Fourth Edition)

Engineering Sciences Data Unit (ESDU)

SPF-M3-1-2007 Pipe and annulus flow tests.

American National Standards Institute （ANSI)

ANSI/ASTM F2818:2010 Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
ANSI/ASHRAE SMACNA Standard 126-2020 Method of Testing HVAC Air Ducts
ANSI S1.13-2005 Measurement of Sound Pressure Levels in Air

Portuguese Institute of Quality

NP EN 12106-2000 Plastics piping systems Polyethylene(PE) pipes Test method for the resistance to internal pressure application of squeeze-off
NP 520-1988 Asbestos-cement pressure pipes Watertightness test

Lithuanian Standards Office

LST EN 12350-7-2009 Testing fresh concrete - Part 7: Air content - Pressure methods

(U.S.) Plastic Pipe Association

PPI REC. B-2005 Thermoplastic Piping for the Transport of Compressed Air or Other Compressed Gases

GM Europe

GME 14018-2007 Testing the Force Fit of Pipe Connections of Exhaust System Pipes (English/German; Note: This specification may be applied only for current projects. It is Superceded for all future projects and replaced by GMW14449.)

Association of German Mechanical Engineers

VDI 3786 Blatt-16 E:2020-06 Environmental Meteorology Meteorological Measurement Atmospheric Pressure
VDI 3786 Blatt 16-2010 Environmental meteorology - Meteorological measurements - Atmospheric pressure

Argentine Institute of Standardization

IRAM OFICIAL 1602 N.I.O.-1959 Method for determination of pressure on air content in fresh concrete

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 6822-2001 Road vehicles.Pressure test connection for compressed-air pneumatic braking equipment

Canadian Standards Association (CSA)

CSA B51-2019(R2024) Boiler, pressure vessel, and pressure piping code
CSA Z169-M1978-1978 Aluminum Pipe and Pressure Piping Systems
CSA B51-2003(R2007) Boiler, Pressure Vessel, and Pressure Piping Code
CSA B51-1995 Boiler, Pressure Vessel, and Pressure Piping Code
CSA B51-14:2014 Boiler, pressure vessel, and pressure piping code

American Society of Mechanical Engineers (ASME)

ASME B31.3-2022 Process Piping - ASME Code for Pressure Piping, B31
ASME B31.8S-2022 Managing System Integrity of Gas Pipelines - ASME Code for Pressure Piping, B31. Supplement to ASME B31.8

U.S. Military Regulations and Norms

ARMY UFGS-33 34 00-2008 FORCE MAINS AND INVERTED SIPHONS; SEWER

United States Navy

NAVY UFGS-43 15 00.00 20-2006 LOW PRESSURE COMPRESSED AIR PIPING (NON-BREATHING AIR TYPE)

Associação Brasileira de Normas Técnicas

ABNT NBR 16887-2020 Concrete - Determination of air content of freshly mixed concrete - Pressure method

Yugoslav Association for Standardization

JUS M.E3.151-1996 Pressure testing pipeline and gas appliances
JUS H.F8.310-1991 Hatural gas. Determlnatlon of mercury at hlgh or Ion pressure

Austrian Standards

ONORM B 5071-1995 Pipes, pressure pipes and fittings of reinforced concrete - Requirements, testing and quality control -Markina of conformitv
ONORM B 2520-1992 Construction of gas pipelines made of steel pipes - Requirements for pipes and pipeline elements for working pressures higher than 16 bar

Others: Pipeline pressure measurement,Air Duct Pressure Measurement