Penetration test simulation test

Penetration test simulation test, Total:297 items.

The international standard classification for "Penetration test simulation test" includes: Textile fabrics , Solid fuels , Fire-protection , aircraft tyres , Environmental testing , Analytical chemistry in general , Footwear , Road transport , Aerospace engines and propulsion systems .

The Chinese standard classification for "Penetration test simulation test" includes: Basic standards and general methods , Coal for coking, chemical and building materials , Fire protection technology , Tyre , Basic standards and general methods , Coal analysis methods , Basic standards and general methods , Basic standards and general methods for water treatment agent , Footgear , Clothing, footgear and headwear in general , Lubricating oil , Highway transportation in general , Spacecraft power system .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 24218.8-2010 Textiles—Test methods for nonwovens—Part 8:Determination of liquid strike-through time(simulated urine)
GB/T 7702.22-1997 Standard test method for granular activated carbon from coal-Determination of breakthrough sulphur capacity
GB/T 2423.24-2013 Enviromental testing—Part 2:Test methods—Test Sa:Simulated solar radiation at ground level and guidance for solar radiation testing
GB/T 9747-2004 Dynamometer test methods for aircraft tyres
GB/T 27902-2011 Technical rules for electrical fire simulation experiment

Taiwan Provincial Standard of the People's Republic of China

CNS 14799-2004 Method of test for resistance of materials used in protective clothing to penetration by synthetic blood
CNS 14801-2004 Method of test for water resistance of material used in protective clothing (Impact penetration test)
CNS 14800-2004 Method of test for resistance of materials used in protective clothing to penetration by blood-borne pathogens using Phi-X174 bacteriophage penetration as a test system

Military Standard of the People's Republic of China-General Armament Department

GJB 3758-1999 Thermal Simulation Method for Satellite Vacuum Thermal Test
GJB 2173-1994 Artillery dynamic recoil simulation test method
GJB 4610-1993*GJBz 20127.5-1993 False target design finalization test procedure Thermal infrared simulation effect test
GJB 3758A-2021 Thermal simulation methods for vacuum thermal test of spacecraft
GJB 4612-1993*GJBz 20127.7-1993 False target design finalization test procedures Pyrotechnic simulation effect test
GJB 7904-2012 General specification of simulated projectile for gun for testing and training
GJB 4611-1993*GJBz 20127.6-1993 False target design finalization test procedures sound simulation effect test
GJB 982.8-1990 Aviation brake tire test method High temperature resistance simulation test
GJB 2173A-2020 Artillery dynamic recoil simulation test method
GJB 8669-2015 Simulated launch test method for terminal guided artillery shells
GJB 3758A-2019 Thermal Simulation Method for Spacecraft Vacuum Thermal Test
GJB 109-1986 Aeronautical tire dynamic simulation test method
GJB 982.7-1990 Simulation test of aviation brake tire test method
GJB 573.16-1988 Fuze environment and performance test method simulated airdrop test
GJB 59.29-1991 Armored Vehicle Test Procedures Armor Penetration Fire Extinguishing and Explosion Suppression Test
GJB 8698.6-2015 Grenade Launcher Test Methods Part 6: Environmental Simulation Test

Professional Standard - Coal

MT/T 997-2006 Determination of NH3 breakthrough capacity and breakthrough time of activated carbon
MT/T 675-1997 Simulation Test Method for Side Slope of Open Pit Coal Mine

未注明发布机构

FORD FLTM BQ 104-07-2000 ENVIRONMENTAL TEST CYCLES
FORD FLTM BI 123-01-2005 PAINTED SHEET METAL CORROSION TEST (LABORATORY-SIMULATED ARIZONA PROVING GROUND TEST)

Professional Standard - Military and Civilian Products

WJ 646-1971 Simulated flammability tester
WJ 2402.6-2005 Artillery follow-up system test method part 6: simulated shooting test
WJ 2103-1993 Test method for impinging primer fire simulated shooting range

Professional Standard - Aviation

HB 7265-1996 Flame Penetration Test Methods for Civil Craft Cargo Hold Liner
HB 7265-2022 Oil burner test for cargo liners of civil aircraft

Professional Standard-Ships

CB 20011-2011 Test method for simulation of torpedo target

Professional Standard - Chemical Industry

HG/T 3136-2022 Simulated walk for shoes(life)testing machine
HG/T 3611-2023 Test methods for simulated walking (lifetime) of footwear
HG/T 3611-1999 Test method-Simulated walk (life) of shoes
HG/T 2878-2023 Rubber shoe fitting test rules
HG/T 2878-1997 Code of rubber footwear wear trials
HG/T 2160-2008 Dynamic simulation for cooling water
HG/T 2160-1991 Dynamic simulation method for cooling water
HG/T 2160-2024 Dynamic simulation method for cooling water

Professional Standard - Textile

FZ/T 60017-1993 Test method for liquid penetration of thin nonwoven fabrics for sanitary use

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5491.17-2005 Test method of terminally guided projectile Part 17:Simulated transportation test
GJB 5495.6-2005 Test method of grenade launcher Part 6:Test of simulated environment
GJB 5389.33-2005 Test method of gun-launched missile Part 33:Impact test for simulating launch
GJB 5902.6-2006 Test method of silence pistol Part 6: The test of entironment simulation
GJB 3196.20A-2005 Test methods of cartridge.Part 20:Armour piercing test

Professional Standard - Petrochemical Industry

SH/T 0300-1992 Crankcase simulation test (QZX method)

Group Standards of the People's Republic of China

T/CANSI 43-2020 M ethods of test for container ships with simulated cranes
T/CSTM 00046.2-2018 Corrosion test of low alloy structure steels -- Part 2: Corrosion tests in simulated atmosphere
T/CECS 1589-2024 Earthquake simulation shaking table test standard

Professional Standard - Aerospace

QJ 1663A-1998 Method for Altitude Simulation Test of Attitude Control Rocket Motor
QJ/T 815.1-1994 Simulation Test Method for Road Transportation of Products

National Metrological Technical Specifications of the People's Republic of China

JJF 1271-2010 Calibration Specification for Simulation Test-bed for Road Transportation

Professional Standard - Water Conservancy

SL 237-014-1999 Code for test of soil - percolation test

Professional Standard - Machinery

JB/T 7671-2017 ESP-Airflow distribution simultated test method

European Committee for Standardization (CEN)

prEN 956-1992 Non-destructive testing; penetrant testing; equipment
prEN 863-1992 Protective clothing; mechanical properties; test method: puncture resistance
EN ISO 23277:2009 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels [Superseded: CEN EN 1289]
EN 14477:2004 Packaging - Flexible packaging material - Determination of puncture resistance; Test methods
prEN ISO 12236 rev Geosynthetics - Static puncture test (CBR test)

Korean Agency for Technology and Standards (KATS)

KS K ISO 9073-8-2015 Textile － Test methods for nonwovens － Part 8: Determination of liquid strike-through time(simulated urine)
KS B ISO 23277:2007 Non-destructive testing of welds-Penetrant testing of welds-Acceptance levels
KS B ISO 23277:2013 Non-destructive testing of welds-Penetrant testing of welds-Acceptance levels
KS F 4938-2018(2023) Standard test method for root penetration resistance
KS K ISO/TR 12118:2016 Textiles-Methods of simulating colour change during wear by means of laboratory colour-fastness tests
KS C IEC 60068-2-5:2002 Environmental testing － Part 2: Tests － Test Sa: Simulated solar radiation at ground level
KS F 2842-2001 Fire resistance tests for through penetration fire stops
KS C IEC 60068-2-5:2017 Environmental testing － Part 2: Tests － Test Sa: Simulated solar radiation at ground level
KS F 2597-2011(2016) Standard test method for water penetration depth into concrete under pressure
KS C IEC 60068-2-5-2017 Environmental testing－Part 2：Tests－Test Sa：Simulated solar radiation at ground level
KS K ISO/TR 12118-2021 Textiles-Methods of simulating colour change during wear by means of laboratory colour-fastness tests
KS M 7127-2004 Testing method for water vapor transmission rate of flexible barrier materials
KS C IEC 60650-2024 Analogue counting ratemeters — Characteristics and test methods
KS K ISO 17491-5:2021 Protective clothing — Test methods for clothing providing protection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid(manikin spray test)
KS K ISO 17491-5-2021 Protective clothing — Test methods for clothing providing protection against chemicals — Part 5: Determination of resistance to penetration by a spray of liquid(manikin spray test)
KS C IEC 60650:2009 Analogue counting ratemeters-Characteristics and test methods
KS K ISO 17491-3-2017(2022) Protective clothing — Test methods for clothing providing protection against chemicals — Part 3: Determination of resistance to penetration by a jet of liquid(jet test)
KS B ISO 3452-2:2007 Non-destructive testing － Penetrant testing － Part 2: Testing of penetrant materials
KS C IEC 60068-2-5:2021 Environmental testing — Part 2-5: Tests — Test S:Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
KS C IEC 60068-2-5-2021 Environmental testing — Part 2-5: Tests — Test S:Simulated solar radiation at ground level and guidance for solar radiation testing and weathering
KS C IEC 60068-2-48-2002(2012) Environmental testing － Part 2: Tests － Guidance on the application of the tests of IEC Publication 68 to simulate the effects of storage
KS D 0206-2022 Steel－Hardenability test by end quenching(Jominy test)
KS A 5101-2-2004(2019) Test sieves － Part 2: Test sieves of perforated metal plate
KS K ISO 12236-2021 Geosynthetics－Static puncture test (CBR test)
KS K ISO 9073-8:2015 Textile － Test methods for nonwovens － Part 8: Determination of liquid strike-through time(simulated urine)
KS K 0822-2022 Test method for penetration resistance of cloth to passage of feather and down: Tumbling method
KS K ISO 9073-8:2010 Textile-Test methods for nonwovens-Part 8:Determination of liquid strike-through time(simulated urine)

American Society for Testing and Materials (ASTM)

ASTM E814-11a Standard Test Method for Fire Tests of Penetration Firestop Systems
ASTM F3014-14 Standard Test Method for Penetration Testing of Needles Used in Surgical Sutures
ASTM D243/D243M-22 Standard Test Method for Residue of Specified Penetration
ASTM D243/D243M-20 Standard Test Method for Residue of Specified Penetration
ASTM D2322-00 Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
ASTM E1135-97 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
ASTM D2322-00(2001) Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
ASTM D2322-00(2005) Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
ASTM E1135-97(2003) Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
ASTM F1671/F1671M-22 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
ASTM F1671-97b Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
ASTM C1389-90(1996)e1 Standard Test Method for Water Penetration and Leakage Through Masonry
ASTM F1671/F1671M-25a Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
ASTM E814-00 Standard Test Method for Fire Tests of Through-Penetration Fire Stops
ASTM E1135-97(2008)e1 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
ASTM F1671/F1671M-25a-25 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
ASTM D5778-95(2000) Standard Test Method for Performing Electronic Friction Cone and Piezocone Penetration Testing of Soils
ASTM F2588-12 Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles
ASTM F2588-07 Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles
ASTM D5778-07 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
ASTM D5778-12 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
ASTM D7097-09 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT
ASTM D6567-00 Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
ASTM D5514/D5514M-24 Standard Test Methods for Large-Scale Hydrostatic Puncture Testing of Geosynthetics
ASTM E747-97 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
ASTM D6567-00(2006) Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
ASTM D2570-96(2002) Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D2570-16 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM C1202-97 Standard Test Method for Electrical Indication of Concrete''s Ability to Resist Chloride Ion Penetration
ASTM D4833/D4833M-07(2020) Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
ASTM D2570-24 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM C1202-12 Standard Test Method for Electrical Indication of Concrete''s Ability to Resist Chloride Ion Penetration
ASTM D6548-05 Standard Test Method for Resistance to Mechanical Penetration of Sanitary Tissue Papers (Ball Burst Procedure)
ASTM C1202-08 Standard Test Method for Electrical Indication of Concrete''s Ability to Resist Chloride Ion Penetration
ASTM D5487-98(2008) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D2570-96 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
ASTM D6567-14 Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat 40;TRM41;
ASTM D8101/D8101M-17 Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
ASTM D5487-16 Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM C1712-24 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test

Bureau of Indian Standards

IS 15891-8-2012 Textiles —— Test Methods for Nonwovens Part 8 Determination of Liquid Strike —— Through Time (Simulated Urine)
IS 17377-2-2020 Textiles — Test Method for Permeation Testing of Protective Ensembles with Nerve Agents or Simulants
IS 17380-2020 Textiles — Test Method for Permeation Testing of Protective Ensembles with Nerve Agents or Simulants
IS 15891-13-2024 Nonwovens-Methods of Test - Part 13 Repeated Liquid Strike-Through Time (Simulated Urine)
IS 16078-2013 Geosynthetics - Static Puncture Test (CBR Test)

Swedish Institute for Standards

SS-EN ISO 9073-13:2023 Nonwovens - Test methods - Part 13: Repeated liquid strike-through time (simulated urine) (ISO 9073-13:2023)
SS 882470:1978 Protective footwear - Deformation and penetrationresistance - Test methods
SS-EN 13087-3:2000 Protective helmets - Test methods - Part 3: Resistance to penetration
SS-EN 1366-3:2022 Fire resistance tests for service installations - Part 3: Penetration seals
SS-EN 60068-2-48:2001 Environmental testing - Part 2: Tests - Guidance on the application of the tests of IEC 60068 to simulate the effects of storage
SS-EN 12881-2:2005+A1:2008 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

Canadian General Standards Board （CGSB)

CGSB 4.2 NO. 26.5-M89-CAN/CGSB-1989(R2004) Textile Test Methods Water Resistance - High-Pressure Penetration Test
CAN/CGSB 4.2 No. 26.5-M89(2013) Test methods for textiles - Water permeability - High pressure penetration test

Standard Association of Australia （SAA）

AS 1289.6.3.1:2004(R2016) Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Standard penetration test (SPT)
AS 1289.6.3.1:2004 Methods of testing soils for engineering purposes - Soil strength and consolidation tests - Determination of the penetration resistance of a soil - Standard penetration test (SPT)
AS 60068.2.5:2003 Environmental testing - Tests - Test Sa: Simulated solar radiation at ground level
AS 1289.F3.3:1984 Methods of testing soil for engineering purposes - Part F - Soil strength and consolidation tests - Determination of the penetration resistance of a soil with a Perth sand penetrometer
AS 60068.2.48:2003 Environmental testing - Tests - Guidance on the application of the tests of AS 60068 to simulate the effects of storage
AS 1099.2SA:1980 Basic environmental testing procedures for electrotechnology, Part 2SA: Tests - Test Sa - Simulated solar radiation
AS 1289.6.3.2:1997(R2013) Soil test methods for engineering use Soil strength and consolidation tests Determination of soil penetration resistance 9kg dynamic cone penetrometer test

International Organization for Standardization (ISO)

ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels
ISO 3059:2001 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions
ISO 23277:2006 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels
ISO/TR 12116:2008 Textiles - Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests
ISO 9117-1:2009 Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time
ISO 12706:2000 Non destructive testing - Terminology - Terms used in penetrant testing
ISO 9073-13:2023 Nonwovens — Test methods — Part 13: Repeated liquid strike-through time (simulated urine)
ISO/FDIS 9073-13 Nonwovens — Test methods — Part 13: Repeated liquid strike-through time (simulated urine)
ISO 13427:2014 Geosynthetics - Abrasion damage simulation (sliding block test)
ISO 9073-8:1995 Textiles - Test methods for nonwovens - Part 8: Determination of liquid strike-through time (simulated urine)

Underwriter Laboratories of Canada (ULC)

ULC-S115-1977 Small Scale Fire Test of Walls and Partitions Penetrated by Small Pipes
ULC-S115-M1982-1982 Small Scale Fire Test of Walls and Partitions Penetrated by Small Pipes

American National Standards Institute （ANSI)

ANSI/ASTM E814:2013 Test Method for Fire Tests of Penetration Firestop Systems
ANSI/UL 1479b-2006 Standard for Safety for Fire Tests of Through-Penetration Firestops
ANSI/UL 1479-2012 Standard for Fire Tests of Through-Penetration Firestops
ANSI/UL 1479-2015 UL Standard for Safety Fire Tests of Through-Penetration Firestops (Fourth Edition)
ANSI/ASTM F1900:1998 Test Method for Water Resistance of Footwear Using a Walking Step Simulator

Japanese Industrial Standards Committee (JISC)

JIS Z 2323:2012 Non-destructive testing -- Penetrant testing and magnetic particle testing -- Viewing conditions
JIS Z 2323:2005 Non-destructive testing -- Penetrant testing and magnetic particle testing -- Viewing conditions
JIS Z 2323:2017 Non-destructive testing -- Penetrant testing and magnetic particle testing -- Viewing conditions
JIS R 3106:1985 Testing method on transmittance and reflectance for daylight and solar radiation and solar heat gain coefficient of flat glass
JIS H 0522:1969 Methods of radiographic test and classification of radiographs for aluminium castings
JIS C 60068-2-48:2004 Environmental testing -- Part 2: Tests. Guidance on the application of the tests of JIS environmental testing series to simulate the effects of storage

German Institute for Standardization

DIN EN ISO 23277 E:2013-02 Non-destructive inspection and penetration test acceptance levels of welds (draft)
DIN 51580:1989 Testing of petroleum waxes; determination of cone penetration
DIN EN ISO 23277:2010 Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (ISO 23277:2006); German version EN ISO 23277:2009
DIN 19662:2012 Soil quality - Field tests - Determination of soil penetration resistance by means of a hand held penetrometer
DIN 19662 E:2011-08 Draft Document - Soil quality - Field tests - Determination of soil penetration resistance by means of a hand held penetrometer
DIN EN 14477:2004 Packaging, Flexible packaging material - Determination of puncture resistance - Test methods; German version EN 14477:2004
DIN 53142-1:2004 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN 53142-1 E:2014-09 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN EN 60068-2-48:2000 Environmental testing - Part 2: Tests; guidance on the application of the tests of IEC 60068 to simulate the effects of storage (IEC 60068-2-48:1982); German version EN 60068-2-48:1999
DIN 53142-1:2014 Testing of board - Puncture test - Part 1: Puncture test with a pendulum punching device
DIN EN ISO 23277:2015 Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015); German version EN ISO 23277:2015
DIN EN 12881-2:2009-10 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test; German version EN 12881-2:2005+A1:2008
DIN EN ISO 13427:1998 Geotextiles and geotextile-related products - Abrasion damage simulation (sliding block test) (ISO 13427:1998); German version EN ISO 13427:1998
DIN EN 1366-14:2024-04 Fire resistance tests for device installations - Part 14: Partial penetration seals; German and English version prEN 1366-14:2024
DIN 53142-2 E:2014-09 Testing of board - Puncture test - Part 2: Puncture test with linear move
DIN 53142-2:2014 Testing of board - Puncture test - Part 2: Puncture test with linear move
DIN 52310:1986 Headform impact test on safety glass for vehicle glazing
DIN EN 60068-2-5:2000 Environmental testing - Part 2: Tests; test Sa: Simulated solar radiation at ground level (IEC 60068-2-5:1975); German version EN 60068-2-5:1999
DIN 53142-2:2004 Testing of board - Puncture test - Part 2: Puncture test with linear move
DIN CEN/TS 17986:2024 Flexible sheets for waterproofing - Extrapolation rules for testing results on resistance to root penetration; German version CEN/TS 17986:2023
DIN EN 14363 A2 E:2021-11 Verification test and simulation behavior and static test of running characteristics of railway application vehicles
DIN EN ISO 22612:2005 Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration (ISO 22612:2005); German version EN ISO 22612:2005
DIN EN 12881-1:2006 Conveyor belts - Fire simulation flammability testing - Part 1: Propane burner tests; German version EN 12881-1:2005
DIN EN ISO 12236:2006-11 Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006); German version EN ISO 12236:2006

GM North America

GM GM9600P-1996 Car Wash Simulation Test
GM GM9537P-1989 Draw Bead Simulator Testing

Ente Nazionale Italiano di Unificazione

UNI EN 13087-3:2003 Protective helmets - Test methods - Resistance to penetration.
EC 1-2013 UNI EN ISO 22476-1:2012 Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test
UNI EN ISO 22476-1:2012 Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test
UNI EN ISO 22476-1:2023 Geotechnical investigation and testing - Field testing - Part 1: Electrical cone and piezocone penetration test
UNI EN ISO 9073-13:2023 Nonwovens - Test methods - Part 13: Repeated liquid strike-through time (simulated urine)
UNI EN 14289:2005 Leather - Physical and mechanical tests - Determination of water penetration pressure
UNI EN ISO 22612:2005 Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration
UNI EN ISO 9073-5:2025 Nonwovens - Test methods - Part 5: Determination of resistance to mechanical penetration (ball burst procedure)
UNI EN 12881-2:2005 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test
UNI CEN/TS 17986:2023 Flexible sheets for waterproofing - Extrapolation rules for testing results on resistance to root penetration
UNI EN 12881-2:2008 Conveyor belts - Fire simulation flammability testing - Part 2: Large scale fire test

GM Daewoo

GMKOREA EDS-T-7636-2011 Test Method for Resistance to Penetration of Sound Deadener Pads
GMKOREA EDS-T-2316-2011 2-Axis Simulation Test for Rear Axle

Czech Standards Institute (UNMZ)

CSN 80 6114-1990 Non-woven fabrics. Break-through resistance. Cone drop test
CSN 03 8825-1975 Simulated solar radiation test (at ground level)
CSN 65 7114-1980 Needle penetration of petroleum waxes test

Association Francaise de Normalisation

NF X41-509:1956 PROTECTION. PENETRATION TEST OF WOOD PROTECTION PRODUCTS.
NF S74-526*NF EN 863:1996 Protective clothing. Mechanical properties. Test method : puncture resistance.
NF EN 1366-3+A1:2024 Fire resistance tests for service installations - Part 3 : penetration seals
NF EN 1366-3:2005 Fire resistance tests for service installations - Part 3 : penetration seals
NF EN 1366-3/IN1:2024 Fire resistance tests for service installations - Part 3 : penetration seals
NF H34-084*NF EN 16283:2013 Packaging - Flexible aluminium tubes - Test method to measure the force to pierce the membrane
NF S72-509-3*NF EN 13087-3:2000 Protective helmets - Test methods - Part 3 : resistance to penetration
NF L52-250-501*NF EN 3475-501:2006 Aerospace series - Cables, electrical, aircraft use - Test methods - Part 501 : dynamic cut-through
NF X11-505:1999 Test sieves - Technical requirements and testing - Test sieves of perforated metal plate.
XP P84-180*XP CEN/TS 17986:2023 Flexible sheets for waterproofing - Extrapolation rules for testing results on resistance to root penetration
NF C20-748*NF EN 60068-2-48:2000 Environmental testing - Part 2 : tests - Guidance on the application of the test of IEC 60068 to simulate the effects of storage.
NF T47-107-2/IN1*NF EN 12881-2/IN1:2008 Conveyor belts - Fire simulation flammability testing - Part 2 : large scale fire test
NF T47-107-1*NF EN 12881-1:2014 Conveyor belts - Fire simulation flammability testing - Part 1 : propane burner tests
NF T47-107-1:2008 Conveyor belts - Fire simulation flammability testing - Part 1 : propane burner tests.
NF EN 1383:2016 Wooden structures - Test methods - Resistance to penetration of the head of fasteners through wood
NF S97-164*NF EN ISO 22612:2005 Clothing for protection against infectious agents - Test method for resistance to dry microbial penetration
NF T47-107-2:2005 Conveyor belts - Fire simulation flammability testing - Part 2 : large scale fire test.
NF G38-122*NF EN ISO 13427:2015 Geosynthetics - Abrasion damage simulation (sliding block test)

Society of Automotive Engineers (SAE)

SAE AS5127/2 Test Method for Aerospace Firewall Sealant Flame Penetration
SAE AS5127/2C Test Method for Aerospace Firewall Sealant Flame Penetration
SAE AS5127/2A Test Method for Aerospace Firewall Sealant Flame Penetration
SAE AS5127/2B Test Method for Aerospace Firewall Sealant Flame Penetration
SAE AS5127/2D Test Method for Aerospace Firewall Sealant Flame Penetration
SAE AIR5320-1999 Summary of Icing Simulation Test Facilities
SAE AIR5320A-2015 Summary of Icing Simulation Test Facilities
SAE AS5127/2-2000 Test Methods for Aerospace Firewall Sealant Flame Penetration
SAE AS5127/2A-2013 Test Methods for Aerospace Firewall Sealant Flame Penetration
SAE AS5127/2B-2014 Test Method for Aerospace Firewall Sealant Flame Penetration
SAE AS5127/2C-2020 Test Method for Aerospace Firewall Sealant Flame Penetration
SAE J427-1991 Penetrating Radiation Inspection March 1991
SAE AIR6211A Ice Penetration Test Method for Runways and Taxiways Deicing/Anti-Icing Chemicals
SAE AIR6211B Ice Penetration Test Method for Runways and Taxiways Deicing/Anti-Icing Chemicals

Standards Norway

NS 3548:1987 Watertight flexible sheets — Tests for penetration by an increasing force
NS-EN 13087-3:2000 Protective helmets — Test methods — Part 3: Resistance to penetration
NS-EN 1366-3:2021 Fire resistance tests for service installations — Part 3: Penetration seals
NS-EN 12881-2:2005+A1:2008 Conveyor belts — Fire simulation flammability testing — Part 2: Large scale fire test
NS-EN 12881-2:2005 Conveyor belts — Fire simulation flammability testing — Part 2: Large scale fire test
NS-EN ISO 9073-13:2023 Nonwovens - Test methods - Part 13: Repeated liquid strike-through time (simulated urine) (ISO 9073-13:2023)

British Standards Institution (BSI)

BS EN 60068-2-5:2000 Environmental testing - Test methods - Test Sa: Simulated solar radiation at ground level
BS EN 16283:2013 Packaging. Flexible aluminium tubes. Test method to measure the force to pierce the membrane
05/30128302 DC EN ISO 22476-1. Geotechnical investigation and testing. Field testing. Part 1. Electrical cone and piezocone penetration tests
BS 6906-4:1989 Methods of test for geotextiles-Determination of the puncture resistance (CBR puncture test)
BS EN 12881-1:2005 Conveyor belts - Fire simulation flammability testing - Propane burner tests
BS EN ISO 9073-8:1998 Textiles. Test methods for nonwovens. Determination of liquid strike-through time (simulated urine)
BS EN ISO 7384:1995 Corrosion tests in artificial atmospheres. General requirements
PD ISO/TR 12116:2008 Textiles. Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests
BS PD ISO/TR 12116:2008 Textiles. Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests
BS EN ISO 9073-5:2025 Nonwovens. Test methods - Determination of resistance to mechanical penetration (ball burst procedure)
BS PD CEN/TS 17986:2023 Flexible sheets for waterproofing. Extrapolation rules for testing results on resistance to root penetration
BS ISO 3310-2:2013 Test sieves. Technical requirements and testing. Test sieves of perforated metal plate
BS EN ISO 13433:2006 Geosynthetics - Dynamic perforation test (cone drop test)
BS EN 60068-2-5:2011 Environmental testing. Tests. Test Sa. Simulated solar radiation at ground level and guidance for solar radiation testing

Indonesia Standards

SNI 7648:2010 Test Method for Air Permeability of Textiles
SNI 08-6511-2001 Daya tembus air pada geotekstil - Cara uji
SNI 0585.2:2009 Kertas dan karton - Cara uji daya tembus udara - Bagian 2: Metode Bendtsen

Spanish Association for Standardization (UNE)

UNE-EN 13087-3/A1:2002 Protective helmets - Test methods - Part 3: Resistance to penetration.
UNE-EN 60068-2-5:2011 Environmental testing -- Part 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing

Danish Standards Foundation

DANSK DS/EN 13087-3:2000 Protective helmets - Test methods - Part 3: Resistance to penetration
DS/EN 13087-3:2000 Protective helmets - Test methods - Part 3: Resistance to penetration
DS/EN 13087-3/A1:2002 Protective helmets - Test methods - Part 3: Resistance to penetration
DANSK DS/ISO 9073-13:2023 Nonwovens – Test methods – Part 13: Repeated liquid strike-through time (simulated urine)
DANSK DS/CEN/TS 17986:2023 Flexible sheets for waterproofing – Extrapolation rules for testing results on resistance to root penetration

International Electrotechnical Commission (IEC)

IEC 61196-1-203:2007 Coaxial communication cables - Part 1-203: Environmental test methods - Test for water penetration of cable
IEC 60068-2-5:1975 Environmental testing. Part 2: Tests. Test Sa: Simulated solar radiation at ground level
IEC 60650:1979 Analogue counting ratemeters. Characteristics and test methods
IEC 60068-2-5:2018 RLV Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering

Lithuanian Standards Office

LST EN 13087-3-2001 Protective helmets - Test methods - Part 3: Resistance to penetration
LST EN 13087-3-2001/A1-2002 Protective helmets - Test methods - Part 3: Resistance to penetration

Gosstandart of Russia

GOST R 57700.11-2018 Numerical modeling of physical processes. Processes of impact interaction. Verification and validation of numerical models of low-velocity impacts and penetrations. Requirements
GOST R 57700.16-2018 Numerical modelling of physical processes. Processes of impact interaction. Verification and validation of numerical models of high-velocity impacts and penetrations. General requirements
GOST R 55994-2014 Fire resistance tests. Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation

American Petroleum Institute (API)

API REPORT 13A-1980 Analysis of Centrifuge Pile Tests; Simulation of Pile-Driving

South African Bureau of Standard

SANS 3452-2:2000 Non-destructive testing - Penetrant testing Part 2: Testing of penetrant materials

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO/TR 15658:2013 Fire resistance tests -- Guidelines for the design and conduct of non-furnace-based large-scale tests and simulation
OS GSO ISO/TR 12116:2013 Textiles -- Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests

GCC Standardization Organization

GSO ISO/TR 12116:2013 Textiles -- Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests

National Standardisation Body (ASRO)

STAS 10043-1975 PENETRANT RADIATION TESTING Tecminology
STAS 8393/23-1984 Environmental testing procedures SIMULATED SOLAR RADIATION AT GROUND LEVEL Test Sa

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO/TR 12116:2016 Textiles -- Methods of simulating colour change during actual wear by means of laboratory colour-fastness tests

European Committee for Electrotechnical Standardization（CENELEC）

EN 60068-2-5:1999 Environmental Testing Part 2: Tests - Test Sa: Simulated Solar Radiation at Ground Level
EN 60068-2-48:1999 Environmental Testing Part 2: Tests - Guidance on the Application of the Tests of IEC 60068 to Simulate the Effects of Storage

North Atlantic Treaty Organization Standards Agency

STANAG 4164-1998 TEST PROCEDURES FOR ARMOUR PERFORATION TESTS OF ANTI-ARMOUR AMMUNITION

Electronic Components, Assemblies and Materials Association

EIA-364-22B-2000 TP-22B Simulated Life Test Procedure for Electrical Connectors

Others: full simulation test,simulation test,simulation laboratory,Sun simulation test,Sun simulation test,biomimetic test,Packaging - Preliminary evaluation of the decomposition of packaging materials under simulated composting conditions in laboratory tests,Standard Test Method for Electric Scale of Concrete Resistance to Chloride Ion Penetration,Dynamic Penetration Test,Simulation dba test,Penetration test,Aging test of self-propelled components in a solar simulator,Product road transportation simulation test method,Simulation test equipment,Simulated environment test equipment,Simulated environment test equipment,Penetration test simulation test,Thermal Simulation Test Equipment,road simulation test