UV standard curve r and r2
UV standard curve r and r2, Total:202 items.
The international standard classification for "UV standard curve r and r2" includes: Colours and measurement of light , Sterilization and disinfection , Occupational safety. Industrial hygiene .
The Chinese standard classification for "UV standard curve r and r2" includes: Meteorology , , Diagnostic standard for occupational diseases .
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 21005-2007 UV erythema reference action spectrum standard erythema dose and UV index
- GB 28235-2011 Safety and sanitary standard for ultraviolet appliance of air disinfection
Group Standards of the People's Republic of China
- T/FSLA 007-2021 222nm Far Ultraviolet Krypton-Chlorine Excimer Lamp
- T/FSLA 009-2022 222nm Far Ultraviolet Excimer Sterilizer
- T/FSLA 007-2023 222nm Far Ultraviolet Krypton-Chlorine Excimer Lamp
未注明发布机构
- DIN EN 61228:1995 Method for measuring and determining the UV radiation from UV lamps for tanning purposes
- DIN EN ISO 11151-1 E:2013-05 Standard optical components for lasers and laser equipment Part 1: Components for the ultraviolet, visible and near-infrared spectral ranges (draft)
- DIN ISO 226 E:2001-11 Acoustics - Normal equal-loudness-level contours
National Metrological Technical Specifications of the People's Republic of China
- JJF(纺织)081-2018 Calibration Specification for Textiles Solar Ultraviolet Radiation Protective Properties Testers
- JJF(纺织) 081-2018 Calibration Specification for Textiles Solar Ultraviolet Radiation Protective Properties Testers
中华人民共和国国家卫生和计划生育委员会
- GBZ 9-2002 Diagnostic Criteria of Occupational Acute Electric Ophthalmia (Kerato-Conjunctivitis Caused by Ultraviolet Rays)
American Society for Testing and Materials (ASTM)
- ASTM E561-98 Standard Practice for R-Curve Determination
- ASTM E561-15 Standard Test Method for
K Curve DeterminationR - ASTM E561-08 Standard Test Method for
K-R Curve Determination - ASTM D6603-00 Standard Guide for Labeling of UV-Protective Textiles
- ASTM E561-05 Standard Test Method for
K-R Curve Determination - ASTM E561-15a Standard Test Method for
K Curve DeterminationR - ASTM E561-10e2 Standard Test Method for
K-R Curve Determination - ASTM E561-05e1 Standard Test Method for
K-R Curve Determination - ASTM D6603-07 Standard Guide for Labeling of UV-Protective Textiles
- ASTM D6603-11 Standard Guide for Labeling of UV-Protective Textiles
- ASTM D6603-12 Standard Specification for Labeling of UV-Protective Textiles
- ASTM D6603-10 Standard Guide for Labeling of UV-Protective Textiles
- ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
- ASTM E561-10 Standard Test Method for
K-R Curve Determination - ASTM E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
- ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
- ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
- ASTM D4329-13 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics
- ASTM D5894-16 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
- ASTM D4329-05 Standard Practice for Fluorescent UV Exposure of Plastics
- ASTM E3006-20 Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
- ASTM E3006-15 Standard Practice for Ultraviolet Conditioning of Photovoltaic Modules or Mini-Modules Using a Fluorescent Ultraviolet (UV) Lamp Apparatus
- ASTM D5894-96 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
- ASTM D1148-13(2018) Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
- ASTM E561-23 Standard Test Method for
K Curve DeterminationR - ASTM D6068-10(2018) Standard Test Method for Determining
J-R Curves of Plastic Materials - ASTM D5894-05 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
- ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
- ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
- ASTM D6603-19 Standard Specification for Labeling of UV-Protective Textiles
- ASTM D5894-21 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
- ASTM D3732-82(1996)e1 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM D3732-82(2017) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM D2008-23 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials
- ASTM D6544-12 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
- ASTM D3732-82(2001) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM E169-63(1977) Standard Recommended Practices for General Techniques Of Ultraviolet Quantitative Analysis
- ASTM D2008-91(1996)e1 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2008-91(2001) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2008-91(2006) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2008-09 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM E169-04 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
- ASTM D2008-12 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D2008-85 Ultraviolet Absorbance and Absorptivity of Petroleum Products
- ASTM D4839-03(2017) Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection
- ASTM D2269-10(2015) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D2269-99e1 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM E2193-16 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
- ASTM D5208-14(2022) Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
- ASTM G224-23 Standard Practice for Operating UVC Lamp Apparatus for Exposure of Materials
- ASTM D2269-99(2005) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM G130-12(2020) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- ASTM D2269-99 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D2269-10 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D3732-23 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM D3732-82(2011) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
- ASTM D6544-11 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
- ASTM E275-08(2013) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
- ASTM D4144-94(2005) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
- ASTM E169-63(1981)e1 Standard Recommended Practice for General Techniques of Ultraviolet Quantitative Analysis
- ASTM D4587-23 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
- ASTM D6544-00 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
- ASTM D4144-94(2010) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
- ASTM E169-16 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
- ASTM D6544-21 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
- ASTM D6544-00(2007) Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
- ASTM D2269-10(2020) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
- ASTM D1148-13 Standard Test Method for Rubber Deteriorationmdash;Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
- ASTM E275-08 Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers
- ASTM E169-99 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
- ASTM E169-04(2014) Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis
- ASTM D5208-01 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
- ASTM D4144-94(2014) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
- ASTM D5208-09 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
- ASTM D4144-94(1999) Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing
- ASTM D5208-91 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
- ASTM D2703-95 Standard Practice for Rubber Chemicals-Determination of Ultraviolet Absorbance Characteristics
- ASTM D5208-14 Standard Practice for Fluorescent Ultraviolet 40;UV41; Exposure of Photodegradable Plastics
- ASTM G154-04 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
- ASTM D7183-07e1 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D7183-16 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM G177-03(2012) Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37deg; Tilted Surface
- ASTM D7183-07 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
- ASTM D1148-07a Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) and Heat Exposure of Light-Colored Surfaces
SCC
- CIE S013/E:2003 International Standard Global Solar UV Index
- AWWA WQTC58791 Benchmarking UV Collimated Beam Testing: Inter-laboratory Comparison of the UV Sensitivity of MS2 Coliphage
- AWWA WQTC55074 Determination of Fluence (UV Dose) in a Bench-Scale Collimated Beam Apparatus for Monochromatic and Broadband UV Lamps
- CIE 172:2006 UV protection and clothing
- AWWA JAW37660 Journal AWWA — Measuring UV-Absorbing Organics: A Standard Method
- AWWA ACE59838 UV Reactor Analysis Using CFD and UV Intensity Models
- AWWA ACE56307 UV Disinfection of Filtered Water Supplies: Water Quality Impacts on MS2 Dose-Response Curves
- ASHRAE 185.2-2020 Standard 185.2-2020 -- Method of Testing Ultraviolet Lamps for Use in HVAC&R Units or Air Ducts to Inactivate Microorganisms on Irradiated Surfaces (ANSI Approved)
- BS EN 61228:1995 Method of measuring and specifying the UV radiation of ultraviolet lamps used for sun-tanning
- AWWA ACE56298 The Impact of the Draft UV Disinfection Requirements on UV Facility Design and Operation
- AWWA ACE54283 Standard Biodosimetric Evaluation of Low Pressure Ultraviolet Disinfection Units
- AWWA WQTC52914 Using Ultraviolet Light to Achieve Multiple Water Quality Objectives
- AWWA ACE61735 Integrating Ultraviolet Light to Achieve Multiple Treatment Objectives
- BS EN ISO 3656:2002 Animal and vegetable fats and oils. Determination of ultraviolet absorbance expressed as specific UV extinction
- AATCC 186-2009 Weather Resistance: UV Light and Moisture Exposure
- AWWA REUSE52109 Comparison of UV Disinfection Technologies for Meeting California Wastewater Reclamation Criteria
- AATCC 186-2015 Weather Resistance: UV Light and Moisture Exposure
- ANSI/CAN/UL 8802:2023 Ultraviolet (UV) Germicidal Equipment and Systems
- AATCC 186-2006 Weather Resistance: UV Light and Moisture Exposure
- AWWA ACE58215 Synergistic Impacts of Ozone and UV
- AATCC 186-2001 Weather Resistance: UV Light and Moisture Exposure
- AWWA WQTC64063 Dual Purpose UV Light: Using UV Light for Disinfection and for Taste and Odor Oxidation
- ASHRAE Spanish - Standard 185.2-2020 Spanish - Standard 185.2-2020 -- Method of Testing Ultraviolet Lamps for Use in HVAC&R Units or Air Ducts to Inactivate Microorganisms on Irradiated Surfaces (ANSI Approved)
- IEC 61228:1993/AMD1:1996 Amendment 1 - Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning
- AWWA ACE56215 UV Fluence Rate Evaluation in a UV System: Simulating the Impact of Operating and Design Parameters
- DANSK DS/EN ISO 3656:2011 Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction
- AWWA ACE61717 UV and UV/H2O2 Degradation and Subsequent Estrogenic Activity of EDCs in Water
- DANSK DS/EN ISO 3656/A1:2011 Animal and vegetable fats and oils - Determination of ultraviolet absorbance expressed as specific UV extinction
- AWWA WQTC69442 Evaluation of UV Lamp Breakage and Mercury Release
- AWWA WQTC60688 Applying the USEPA UV Disinfection Guidance Manual: Validation and Operations of UV Systems
- AWWA ACE56144 Full Scale Validation Testing of Large UV-Reactors — the German DVGW Standard W294
- AWWA WQTC57121 Hydraulic Calibration and Fluence Determination of a Model UV Disinfection System
- MIL MIL-L-51196-1964 LIGHT, ILLUMINATING AND ULTRAVIOLET (NO S/S DOCUMENT)
- AWWA WQTC60651 UV Disinfection System Validation Plan for New York City's Catskill and Delaware UV Disinfection Facility
- NS-EN ISO 3656:2002 Animal and vegetable fats and oils — Determination of ultraviolet absorbance expressed as specific UV extinction (ISO 3656:2002)
- AWWA ACE56361 Ultraviolet Light: CFD Modeling Overlay with Fluence Rate Modeling as a Predictor of Reactor Performance for Drinking Water UV Systems
- DANSK DS/EN 16489-2:2015 Professional indoor UV exposure services - Part 2: Required qualification and competence of the indoor UV exposure consultant
- NS-EN 16489-2:2014 Professional indoor UV exposure services — Part 2: Required qualification and competence of the indoor UV exposure consultant
- AWWA WQTC52876 Comparison of Monochromatic and Polychromatic UV Light for Disinfection Efficacy
Society of Automotive Engineers (SAE)
- SAE J2297-2013 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a and R-1234yf (HFO-1234yf) Air- Conditioning Systems
- SAE J2297-2011 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a and R-1234yf (HFO-1234yf) Air- Conditioning Systems
- SAE AIR5468-2000 Ultraviolet (UV) Lasers for Aerospace Wire Marking
- SAE AS5649-2012 Wire and Cable Marking Process, UV Laser
- SAE AS5649A-2019 Wire and Cable Marking Process, UV Laser
- SAE J2297-1996 Ultraviolet Leak Detection: Stability and Compatibility Criteria of Fluorescent Refrigerant Leak Detection Dyes for Mobile R-134a Air- Conditioning Systems, Standard September 1996
- SAE AIR5468B-2012 Ultraviolet (UV) Lasers for Aerospace Wire Marking
- SAE AIR5558-2009 Ultraviolet (UV) Laser Marking Performance of Aerospace Wire Constructions
GM North America
- GM GMP.E/P.075-1997 Polyolefin Alloy - 440 MPa Flexural Modulus, UV Stabilized
- GM GMP.E/P.096-2004 Polyolefin Alloy - MPa Flex Mod, UV Stabilized, High Flow
- GM GMP.E/P.032-1990 Polyolefin Alloy - 900 MPa Flexural Modulus, Interior UV Light Stabilized, Injection Molding Grade
- GM GMP.PA66.014-1997 Nylon 66 - UV Stabilized, Heat Stabilized
- GM GMP.E/P.113-2003 Polyolefin Alloy UV Stabilized, 700 MPa Flexural Modulus, Low Temperature Impact, Injection Molded
- GM GMP.E/P.107-2002 Polyolefin Alloy UV Stabilized, 10% Mineral Filler, 1400 Flexural Modulus, Injection Molded
International Commission on Illumination (CIE)
- CIE S 013/E-2003 International Standard Global Solar UV Index
- CIE 172-2006 UV PROTECTION AND CLOTHING
Japanese Industrial Standards Committee (JISC)
- JIS T 2001:2005 Ultraviolet and Infra-red therapy apparatus for home use
International Electrotechnical Commission (IEC)
- IEC 61228:1993 Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning
- IEC 61228/AMD1:1996 Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning; Amendment 1
Korean Agency for Technology and Standards (KATS)
- KS K 0850-2023 Test method for ultraviolet protection rate and ultraviolet protection factor of textiles
- KS K 0850-2014 Test method for ultraviolet protection rate and ultraviolet protection factor of textiles
- KS C IEC 61228-2001(2011) Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning
- KS C IEC 61228-A-2014(2019) Method of measuring and specifying the UV-radiation of ultraviolet lamps used for sun-tanning
- KS B ISO 11151-1:2003 Lasers and laser-related equipment-Standard optical components-Part 1:Components for the UV, visible and near-infrared spectral ranges
- KS B ISO 11151-1:2015 Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
- KS B ISO 11151-1:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 1: Components for the UV, visible and near-infrared spectral ranges
Association Francaise de Normalisation
- NF C72-228:1995 Method of measuring and specifying the uv-radiation of ultraviolet lamps used for sun-tanning.
- NF T75-122:1982 ESSENTIAL OILS. OILS OF CITRUS. DETERMINATION OF CD VALUE BY ULTRAVIOLET SPECTROPHOTOMETRIC ANALYSIS.
- NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours
- NF S77-105:1992 Personal eye-protection. Ultraviolets filters. Transmittance requirements and recommended use.
- NF L52-251*NF EN 4650:2010 Aerospace series - Wire and cable marking process, UV Laser
The American Road & Transportation Builders Association
- AASHTO T 272-1986 Standard Method of Test for Family of Curves - One-Point Method HM-22; PART IIB R(2000)
SAE - SAE International
- SAE AS5649-2007 Wire and Cable Marking Process@ UV Laser
- SAE AIR5468A-2006 Ultraviolet (UV) Lasers for Aerospace Wire Marking
ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.
- ASHRAE HVAC APPLICATIONS SI CH 60-2011 ULTRAVIOLET AIR AND SURFACE TREATMENT
- ASHRAE HVAC APPLICATIONS IP CH 60-2011 ULTRAVIOLET AIR AND SURFACE TREATMENT
- ASHRAE HVAC APPLICATIONS IP CH 60-2015 ULTRAVIOLET AIR AND SURFACE TREATMENT
- ASHRAE HVAC APPLICATIONS SI CH 60-2015 ULTRAVIOLET AIR AND SURFACE TREATMENT
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)
- ASHRAE APPLICATION IP CH 60-2011 ULTRAVIOLET AIR AND SURFACE TREATMENT
British Standards Institution (BSI)
- BS EN ISO 3656:2011+A1:2017 Animal and vegetable fats and oils. Determination of ultraviolet absorbance expressed as specific UV extinction
- BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours
- BS EN 16489-2:2014 Professional indoor UV exposure services. Required qualification and competence of the indoor UV exposure consultant
- BS EN ISO 11151-1:2015 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
- BS EN ISO 11151-1:2000 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
- BS EN 4650:2010 Aerospace series - Wire and cable marking process, UV Laser
- BS EN 13758-2:2003(2007) Textiles - Solar UV protective properties - Classification and marking of apparel
- BS EN 13758-2:2003 Textiles - Solar UV protective properties - Classification and marking of apparel
GSO
- GSO ASTM D2269:2023 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption
(U.S.) Plastic Pipe Association
- PPI TN-33-2004 Standard Ultraviolet (UV) Radiation Exposure Method for Crosslinked Polyethylene (PEX) Tubing
American National Standards Institute (ANSI)
- PD CEN/TS 927-12:2023 Paints and varnishes. Coating materials and coating systems for exterior wood Ultraviolet and visible radiation transmittance (British Standard)
- BS ISO 13050:2022 Synchronous belt drives. Metric pitch, curvilinear profile systems G, H, R and S, belts and pulleys (British Standard)
German Institute for Standardization
- DIN EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
International Organization for Standardization (ISO)
- ISO 226:1987 Acoustics; Normal equal-loudness level contours
- ISO 226:2023 Acoustics — Normal equal-loudness-level contours
- ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
- ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
HU-MSZT
- MSZ 18289/7-1980 Durability testing of construction stones. UV and IR inspection
(U.S.) Ford Automotive Standards
- FORD SK-M2G9543-A-2002 ADHESION PROMOTER, POLYURETHANE, UV RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
RU-GOST R
- GOST 9735-1987 Profile grinders. Standards of accuracy
GOST
- GOST R 70380-2022 Low-pressure germicidal ultraviolet lamps. Methods for measuring energy characteristics of ultraviolet radiation and electrical parameters
GM Europe
- GME QK 000165-1983 Polyamide 12, temperature- and UV-stabilized Polyamide 12, Temperature- and UV-Stabilized German
- GME QK 000164-1983 Polyamide 11, temperature- and UV-stabilized Polyamide 11, Temperature- and UV-Stabilized German
European Committee for Standardization (CEN)
- EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
Standard Association of Australia (SAA)
- ISO 3656:2011/Amd.1:2017 Animal and vegetable fats and oils — Determination of ultraviolet absorbance expressed as specific UV extinction AMENDMENT 1
Requirements for UV standard curve r2,Standard curve r2 and r,UV standard curve r and r2,Standard curve r and r2