When the rheometer is used

When the rheometer is used, Total:146 items.

The international standard classification for "When the rheometer is used" includes: Laboratory medicine .

The Chinese standard classification for "When the rheometer is used" includes: Medical laboratory equipment .

未注明发布机构

DIN 53019-4 E:2015-12 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
DIN 51810-2 E:2016-09 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system

Professional Standard - Medicine

YY/T 1460-2016 Blood rheometer

Professional Standard-Ships

CB 1085.7-1989 Man-hour rated transformer for instrumentation manufacturing

National Metrological Verification Regulations of the People's Republic of China

JJG 157-2020 Dynamic Shear Rheometer

工业和信息化部/国家能源局

JB/T 13150-2017 Nondestructive testing instrument. Variable array probe for eddy current testing instrument

Professional Standard - Traffic

JT/T 838-2012 Flow time tester for fine aggregate

National Metrological Technical Specifications of the People's Republic of China

JJF 2134-2024 Calibration Specification for Rotational Rheometers

Association Francaise de Normalisation

NF ISO 6502-3:2023 Rubber - Measuring vulcanization characteristics using rheometers - Part 3: rotorless rheometer
NF ISO 6502-2:2018 Rubber - Measuring vulcanization characteristics using rheometers - Part 2: oscillating disk rheometer
NF ISO 6502-1:2018 Rubber - Measuring vulcanization characteristics using rheometers - Part 1: introduction
NF C42-544-1/A1:2001 Instrument transformers - Part 1 : current transformers.
NF C42-544-1/A2:2003 Instrument transformers - Part 1 : current transformers.
NF T51-710:1986 Plastics. Polyvinyl chloride pastes. Determination of apparent viscosity using the severs rheometer.
NF C42-502:1974 Measuring instrumetns. Current transformers. Characteristics.
NF T30-070*NF EN ISO 2431:2019 Paints and varnishes - Determination of flow time by use of flow cups
NF C42-569-2*NF EN 61869-2:2013 Instrument transformers - Part 2 : additional requirements for current transformers

German Institute for Standardization

DIN 53019-4:2016-10 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
DIN 53019-4:2016 Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
DIN 51810-2:2017-04 Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
DIN EN ISO 2431:2020-02 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09); German version EN ISO 2431:2019
DIN EN ISO 5530-2:2020-06 Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO/DIS 5530-2:2020); German and English version prEN ISO 5530-2:2020 / Note: Date of issue 2020-05-08*Intended as replacement for...
DIN CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode; German version CEN/TS 15325:2008

SCC

DIN 53019-4 E:2015 Draft Document - Rheometry - Measurement of rheological properties using rotational rheometers - Part 4: Oscillatory rheology
AASHTO T 315-2012(2016) Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2019 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2020 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
BS ISO 11443:2005 Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
UNE 53461:1990 PLASTICS. POLYVINYL CHLORIDE PASTES. DETERMINATION OF APPARENT VISCOSITY USING THE SEVERS RHEOMETER
AASHTO T 313-2012(2016) Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO TP 125-2022(2023) Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
AASHTO TP 125-2016(2020) Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
AASHTO T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
DIN 54458 E:2012 Draft Document - Structural adhesives - Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillation rheometry
BS ISO 5530-4:2002 Wheat flour (Triticum aestivum L.). Physical characteristics of doughs-Determination of rheological properties using an alveograph
DANSK DS/ISO 2431:2019 Paints and varnishes – Determination of flow time by use of flow cups
DANSK DS/CEN/TS 15325:2008 Bitumen and bituminous binders – Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode
SN-CEN/TS 15325:2008 Bitumen and bituminous binders — Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode
DIN 51810-2 E:2016 Draft Document - Testing of lubricants - Testing rheological properties of lubricating greases - Part 2: Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system

YU-JUS

JUS G.S1.508-1997 Plastics - Determination of powder-mix time of PVC resins using a torque rheometer

American Society for Testing and Materials (ASTM)

ASTM C1749-17 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
ASTM C1749-17a Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
ASTM D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D6204-12 Standard Test Method for Rubbermdash;Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers
ASTM D7175-23 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-05e1 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-05 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D7175-07 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
ASTM D5099-93(2003) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D5099-93(1998) Standard Test Methods for Rubber-Measurement of Processing Properties Using Capillary Rheometry
ASTM D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D664-11ae1 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D664-09 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
ASTM D664-18e2 Test Method for Determination of Flexible Creep Hardness of Asphalt Binders Using a Bending Beam Rheometer
ASTM D7654/D7654M-10 Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
ASTM D5099-08 Standard Test Methods for Rubber x2014; Measurement of Processing Properties Using Capillary Rheometry
ASTM D2396-94(1999)e1 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D2396-94(2012) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM D2396-94(2004) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
ASTM F2550-06 Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall
ASTM D5099-08(2017) Standard Test Methods for Rubber&x2014Measurement of Processing Properties Using Capillary Rheometry
ASTM D7271-06(2020) Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer
ASTM C1749-12 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
ASTM D7552-09 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
ASTM D6648-01 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

Japanese Industrial Standards Committee (JISC)

JIS C 1731-1:1998 Instrument transformers for testing purpose and used with general instrument Part 1: Current transformers

Korean Agency for Technology and Standards (KATS)

KS F 2393-2019 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS F 2393-2014 Standard test method for rheological properties of asphalt binder using dynamic shear rheometer
KS M ISO 11443-2022 Plastics－Determination of the fluidity of plastics using capillary and slit-die rheometers
KS C IEC 60044-1:2003 Instrument transformers－Part 1：Current transformers
KS F 2390-2014 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer
KS F 2390-2019 Standard test method for flexural creep stiffness of asphalt binder using bending beam rheometer

International Organization for Standardization (ISO)

ISO/TR 12765:1998 Measurement of fluid flow in closed conduits - Methods using transit-time ultrasonic flowmeters
ISO 4575:1978 Plastics — Polyvinyl chloride pastes — Determination of apparent viscosity using the Severs rheometer
ISO/FDIS 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
ISO 13145:2023 Rubber — Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
ISO 4575:2007 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the Severs rheometer
ISO 2431:2019 Paints and varnishes — Determination of flow time by use of flow cups
ISO 2431:1980 Paint and varnishes — Determination of flow time by use of flow cups
ISO 5530-2:2020 Wheat flour — Physical characteristics of doughs — Part 2: Determination of rheological properties using an extensograph
ISO 14934-4:2014 Fire tests - Calibration and use of heat flux meters - Part 4: Guidance on the use of heat flux meters in fire tests

Lithuanian Standards Office

LST EN 17408-2020 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry

AASHTO - American Association of State Highway and Transportation Officials

T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1998 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2009 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2004 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2012 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1997 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2005 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2006 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
TP5-1993 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Edition 1B)
T 313-2003 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2004 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2005 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2009 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1997 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP 125-2016 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2006 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2008 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
T 313-2012 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
TP1-1998 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

PL-PKN

PN-EN 17408-2021-02 E Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry

CH-SNV

SN EN 17408-2021 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry

IT-UNI

UNI EN 17408-2021 Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry

The American Road & Transportation Builders Association

AASHTO T 315-2022 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 315-2010 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)
AASHTO T 313-2022 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 313-2010 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO T 313-2019 Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
AASHTO TP 125-2016(R2020) Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Mixtures Using the Bending Beam Rheometer (BBR)
AASHTO T 315-2008 Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR)

British Standards Institution (BSI)

BS ISO 11443:2021 Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
19/30387856 DC BS EN 17408. Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
BS EN 60044-8:2002 Instrument transformers - Electronic current transformers
20/30406602 DC BS ISO 11443. Plastics. Determination of the fluidity of plastics using capillary and slit-die rheometers
BS ISO 13145:2023 Rubber. Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
24/30457645 DC BS ISO 13227 Petroleum products and lubricants - Rheological properties of lubricating greases - Determination of flow point using an oscillatory rheometer with a parallel-plate measuring system
BS ISO 4575:2007 Plastics - Poly(vinyl chloride) pastes - Determination of apparent viscosity using the Severs rheometer
BS EN ISO 2431:2019 Paints and varnishes. Determination of flow time by use of flow cups
DD CEN/TS 15325:2008 Bitumen and bituminous binders. Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode
BS DD CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of zero-shear viscosity (ZSV) using a shear stress rheometer in creep mode

GOST

GOST 34751-2021 Rubber compounds. Determination of vulcanization characteristics using rotorless cure meters
GOST 31090.2-2002 Wheat flour. Physical characteristics of the test. Determination of rheological properties using an extensograph
GOST 31090.3-2002 Wheat flour. Physical characteristics of the test. Determination of water absorption and rheological properties using a valorigraph

AENOR

UNE-ISO 4575:2014 Plastics. Poly(vinyl chloride) pastes. Determination of apparent viscosity using the Severs rheometer

RU-GOST R

GOST 28795-1990 Wheat flour. Physical characteristics of doughs. Determination of rheological properties using an alveograph

American Society of Mechanical Engineers (ASME)

ASME MFC-18M-2001 Measurement of Fluid Flow Using Variable Area Meters
ASME MFC-18M-2001(R2016) Measurement of Fluid Flow using Variable Area Meters

GSO

GSO ISO 4575:2013 Plastics - Poly(vinyl chloride) pastes -Determination of apparent viscosity using the Severs rheometer
OS GSO ISO 13145:2013 Rubber - Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
GSO ISO 13145:2013 Rubber - Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer
GSO ISO 2431:2015 Paints and varnishes -- Determination of flow time by use of flow cups

ZA-SANS

SANS 60044-8:2004 Instrument transformers Part 8: Electronic current transformers
SANS 60044-6:2004 Instrument transformers Part 6: Requirements for protective current transformers for transient performance

IN-BIS

IS 3944-1982 How to measure flow time using a flow cup

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE PH-97-9-1-1997 Concentration Shift When Using Refrigerant Mixtures

Danish Standards Foundation

DS/EN ISO 2431:2012 Paints and varnishes - Determination of flow time by use of flow cups
DS/CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode

European Committee for Standardization (CEN)

PD CEN/TS 15325:2008 Bitumen and bituminous binders - Determination of Zero-Shear Viscosity (ZSV) using a Shear Stress Rheometer in creep mode

ES-UNE

UNE-EN ISO 2431:2020 Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09)

Others: When the rheometer is used,Shear during rheometer use