Special threaded connectors

Special threaded connectors, Total:314 items.

The international standard classification for "Special threaded connectors" includes: Equipment for petroleum and natural gas industries , Fasteners , Bolts, screws, studs , Steels profiles , Other valves , Construction materials , Photographic equipment. Projectors .

The Chinese standard classification for "Special threaded connectors" includes: Oil and gas gathering and transportation equipment , Mechanical gadgets and components , Pipe fittings, clamps and seals , Fasteners , Fastener , Hydraulic and pneumatic device , Profile steel and deformed steel , Valve , Concrete structure engineering , Camera and photograph instrument .

Professional Standard - Petroleum

SY/T 6949-2013 Casing and Tubing with Premium Connection
SY 6949-2013 Special threaded casing and tubing

Professional Standard - Aviation

HB 0-2-1974 Anti-loosening method of threaded connection
HB 7179-1995 Threaded Connection Component with Outer Diameter of Draw Rod From Φ14 to Φ22
HB 7178-1995 Threaded Connection Component with Outer Diameter of Draw Rod Greater Than or Equal to Φ 23
HB 1-504-1974 Threaded connection sealing structure
HB 1-504-1983 Threaded connection sealing washer?
HB 0-2-1983 Anti-loosening method of threaded connection
HB 4-59-1987 Sealing Structure of Threaded Connection Piece
HB 4-59-1976 Sealing Structure of Threaded Connections
HB 0-2-2002 Methods of loose-proof for the fastening of thread or pin
HB 7180-1995 Threaded Connection Component of Welded Steel Draw Rod

Professional Standard - Military and Civilian Products

WJ 1926-1990 Piping system screw connection seat hole
WJ 1925-1990 Piping system screw connection end

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6482-2007 Thread extension steel bars for rock drilling
GB 17464-1998 Connecting devices--Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors
GB/T 8464-1998 Valves with female screw ends for water-heating system
GB/T 2878-1993 Fluid power systems and components―Ports―Dimensions and design
GB/T 3103.4-1992 Tolerances for fasteners - Components for bolted connections made mainly from materials with a high temperture strength
GB/T 3098.8-1992 Mechanical properties of fasteners―Components for blted connections made mainly from materials with a high temperature strength

未注明发布机构

DIN 58726 E:2015-03 Production in optical engineering - Screwed connections without fitting part
DIN 16261 E:2019-07 PN 16 cocks with female/female and female/male connection for pressure gauges
DIN EN 148-1 E:2017-08 Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection
DIN EN 14420-5 E:2010-11 Hose fittings with clamp units - Part 5: Threaded connections
DIN 16261:1971 PN 16 cocks with female/female and female/male connection for pressure gauges
DIN 68345 E:2015-12 Screwed connection for handles and brooms - Screw cap and screw plug
DIN 58725 E:2010-04 Production in optical engineering - Screwed connection with fitting part

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5103/5-2006 Detail specification for plug of threaded coupling self-locking crimp contact
GJB 5103/7-2006 Detail specification for plug of threaded coupling crimp contact
GJB 5103/3-2006 Detail specification for receptacle of flange mount threaded coupling solder pin contact
GJB 5103/6-2006 Detail specification for plug of RFI coupling crimp contact
GJB 5103/8-2006 Detail specification for receptacle of single hole mount threaded coupling solder pin contact
GJB 5103/1-2006 Detail specification for receptacle of flange mount threaded coupling crimp contact
GJB 5103/2-2006 Detail specification for receptacle of flange mount threaded coupling solder pin contact
GJB 5103/16-2006 Detail specification for receptacle of single hole mount threaded coupling crimp contact
GJB 1612-1993 Insert contact arrangements for GJB 600 threaded circular electrical connectors

Group Standards of the People's Republic of China

T/ZZB 0128-2016 Copper valves with screwed connections
T/GDC 53-2021 Taper thread thin-walled stainless steel pipe and fittings
T/TGZX 002-2024 Threaded ductile iron pipe fitttings
T/CECS 10287-2023 Straight threaded couplers for steel rebar splicing

Professional Standard - Machinery

JB/T 8249.2-1999 Tripod connections for cameras
JB/T 9313-1999 Special kind of fine screw for optical instruments

Professional Standard-Ships

CB* 3019-1986 External thread connection type and size of pipeline accessories
CB 3019-1986 External thread connection type and size of pipeline accessories

Military Standard of the People's Republic of China-General Armament Department

GJB 600-1988 General specification for threaded circular electrical connectors
GJB 600A-2001 General specification for threaded circular electrical connectors
GJB 7526-2012 2PX Series Small Circular Threaded Electrical Connector Specification
GJB 1612A-2021 Hole arrangement of insulating mounting plate contacts for GJB 600 threaded circular electrical connector

Taiwan Provincial Standard of the People's Republic of China

CNS 4220-1978 Terms of Fasteners for Kinds of Screw-Threads

Professional Standard - Construction Industry

JG 163-2004 Rolled parallel thread splicing of rebars

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1980-2017 Taper thread connection type thin-walled stainless steel pipes and fittings

Professional Standard - Electron

SJ 50600/2-1994 Detail specification for free connectors, electrocal, Circular threaded, rear release, crimp contact, JY3456 type

PL-PKN

PN H74152-1962 Caat iron pipes and speolal castings for preaaure main lines with acrewed- gland joint. Glanda
PN M73134-1966 Hydraulic drive and control equipment
PN H74153-1962 Cast iron pipes and special castings for pressure main liries with serewed-gland joint. ?iners
PN G02055-1971 Rotary drilling Screw caupling Line-pipe threads

RU-GOST R

GOST 21973-1976 Threaded piping joints. Joining threads. Series
GOST 26350-1984 Tube connections and fittings. Connecting threads. Series
GOST 21975-1976 Threaded piping joints. Nomenclature of case parts
GOST 23355-1978 Threaded pipeline connections. Ball nipple. Construction
GOST 22525-1977 Threaded pipeline connections. Pipe nipple ends for union nuts. Construction
GOST 5890-1978 Pipe connection with screwed ends. Specifications
GOST 21858-1978 Threaded pipeline connections. End unions. Construction
GOST 21856-1978 Threaded pipeline connections. Passage unions. Construction
GOST 21857-1978 Threaded pipeline connections. Reduce unions. Construction
GOST 21872-1978 Threaded pipeline connections. Partition unions. Construction
GOST 8967-1975 Pipe steel connections with cylindrical thread for pipelines P = 1,6 MPa. Nippels. Basic dimensions
GOST 23353-1978 Threaded pipeline connections. Cartive nute. Construction
GOST 25682-1983 Threaded pipeline connections. Hollow bolts. Construction

Association Francaise de Normalisation

NF E29-552:1936 Steel connections with gas thread. Socket and joint nut.
NF L40-102:1966 Raccordements à étanchéité axiale - Parties mâles filetées, profil SIm.
NF E29-553:1936 Steel connections with gas thread. Tees.
NF S76-023-1:1999 Respiratory protective devices. Threads for facepieces. Part 1 : standard thread connection.
NF S76-023-2*NF EN 148-2:1999 Respiratory protective devices. Threads for facepieces. Part 2 : centre thread connection.
NF E29-539:1981 Pipework. Screwed connecting part with a spheroconical function for heating plants.
NF S76-023-3*NF EN 148-3:1999 Respiratory protective devices. Threads for facepieces. Part 3 : thread connection M 45 X 3.
NF S76-024-1:2000 Respiratory protective devices - Gas cylinder valves - Part 1: thread connections for insert connector
NF E03-004:1981 Pipe threads where pressure tight joints are made on the threads (tapered external thread and parallel internal thread).
NF L36-139:1971 Screwed ends for swaging on cable.
NF T47-290-5*NF EN 14420-5:2013 Hose fittings with clamp units - Part 5 : threaded connections
NF E25-030-2:2014 Fasteners - Threaded connections with ISO metric thread - Part 2 : design rules for tensile loaded bolted joints - Complete procedure
UTE C93-561U*UTE C93-561:1972 Components for electronic equipment. Miniature connexial connectors with screw coupling. Relevant article sheets.
NF E25-030-1:2014 Fasteners - Threaded connections with ISO metric thread - Part 1 : design rules for tensile loaded bolted joints - Simplified procedure
NF R94-301:1989 Road vehicles. Threading connection for components including an "0" ring. Dimensional characteristics.
NF EN 10226-3:2005 Pipe threads for connection with thread sealing - Part 3: verification by limit gauges

German Institute for Standardization

DIN 58726:2015 Production in optical engineering - Screwed connections without fitting part
DIN 58726:1977 Production in optical engineering; screwed connections without fitting part
DIN 11887:1998 Fittings for food, chemical and pharmaceutical industry - Round thread connections - Design of threaded and conical connection pieces
DIN 58725:2011 Production in optical engineering - Screwed connection with fitting part
DIN 16284:2004 Nipple connections for pressure gauges and their accessories
DIN 2510-8:1971 Bolted Connections with Reduced Shank; Threaded Holes for Studs
DIN EN 148-3:1999 Respiratory protective devices - Threads for facepieces - Part 3: Thread connection M 45 × 3; German version EN 148-3:1999
DIN EN 148-2:1999 Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection; German version EN 148-2:1999
DIN 16261:2024-03 PN 16 cocks with female/female and female/male connection for pressure gauges
DIN 16261:2004-07 PN 16 cocks with female/female and female/male connection for pressure gauges / Note: To be replaced by DIN 16261 (2019-07), DIN 16261 (2023-02).
DIN EN 148-1:1999 Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection; German version EN 148-1:1999
DIN 16261:2023-02 PN 16 cocks with female/female and female/male connection for pressure gauges / Note: Date of issue 2023-01-13*Intended as replacement for DIN 16261 (2004-07).
DIN 58725:2011-07 Production in optical engineering - Screwed connection with fitting part
DIN 7642:1997 Compression couplings - Ring type nipples for brazed connection
DIN 16261:2004 PN 16 cocks with female/female and female/male connection for pressure gauges
DIN 2510-8:1971-08 Bolted Connections with Reduced Shank; Threaded Holes for Studs
DIN 58726:2015-09 Production in optical engineering - Screwed connections without fitting part
DIN 68345:2016-08 Screwed connection for handles and brooms - Screw cap and screw plug
DIN 47299-2:1980 Radio frequency coaxial connectors; terms of connector styles
DIN 58725:1987 Production in optical engineering; screwed connection with fitting part
DIN 71428:1989 Compression couplings with olives; cylindrical thread nipples for use with union nuts

CZ-CSN

CSN 13 7668-1972 Mechanical engineering screwed pipe loints. Locking nuts for adjustablo con-nections with metric threacl
CSN 13 7724-1960 Pipe connections, form T, with connecting metric thread
CSN 13 7850-1960 Sockets of straight pipe connections with conneeting metric thread
CSN 13 7669-1972 Meclianioal engineering screwed pipe joinis. Locking nuts for adjustable con-nections with pipe thread
CSN 13 7729-1960 Adjustable pipe connections, form T, with connecting pipe thread
CSN 13 7728-1960 Adjustable pipe connections, form T, with connecting metric thread
CSN 13 7626-1972 Mechanical engineering screwed pipe joints. Sockets of adjustable pipe con-nections form T with connecting metric thread
CSN 13 7613-1972 Mechanical engineering screwed pipe joints. Sockets of radial straight pipe connections with connecting pipe threacl
CSN 13 7603-1972 Mechanical engineering scrowed pipe joints. Pipes, neck threads and atructural memberd.
CSN 13 7629-1972 Mechanical engineering screwed pipe joints. Sockets of adjustable radial pipe connections form T with connecting pipe thread
CSN 13 8260-1988 Straight screwing with gaskct with in-ternal threads
CSN 13 7455-1960 Thread connection for gas hoses
CSN 13 7854-1962 Sockets for screwing connection
CSN ON 11 1305-1966 Pipe thread connection steering
CSN 13 7722-1960 Angular pipe connections with connecting metric thread
CSN 13 7721-1960 Straight pipe connections with connecting pipe thread
CSN 13 7723-1960 Angular pipe connections with connecting pipe thread
CSN 13 8261-1988 Straight screwing with gasket with in-ternal and external threads
CSN 13 7720-1960 Straight pipe connections with connecting metric thread
CSN 13 7727-1960 Adjustable pipe connections with connecting pipe thread
CSN 13 7725-1960 Pipe connections, form T, with connecting pipe thread
CSN 13 7623-1972 Mechanical engineering screwed pipe joints. Sockets of adjustable angular pipe connectins with connecting pipe thread
CSN EN 148-1-1994 Respiratory protective devices-Threads for facepieces-Standard thread connection
CSN 13 7619-1972 Mechanical engineering screwed pipe joints. Sockets of solid pipe connections form T with connecting pipe thread
CSN 13 7612-1972 Mechanical engineering screwed pipe joints. Sockets of radial straight pipe connections with connecting metric
CSN 13 0030-1985 Pipe line and armatu?e. Thread connections
CSN 13 7618-1972 Mechanical engineering screwed pipe joints. Sockets of solid pipe connections form T with connecting metric thread
CSN 13 7527-1973 Nipples for pressure gauge connections. Np 640
CSN 13 7624-1972 Mechanical enginneering screwed pipe joints. Sockets of adjustable angular radial pipe connections with connecting metric thread
CSN 13 7861-1960 Sockets of angular pipe connections with connecting pipe thread
CSN 13 7622-1972 Mechanical engineering screwed pipe joints. Sockets of adjustable angular pipe connections with connecting metric thread
CSN 13 7860-1960 Sockets of angular pipe connections with connecting metric thread
CSN 13 7851-1960 Sockets of atraight pipe connections with connecting pipe thread
CSN 13 7617-1972 Mechanieal cngincering screwed pipe joints. Soekets of solid angular radial pipe connections with connecting pipe thread
CSN 13 7628-1972 Mechanical engineering screwed pipe joints. Sockets of adjustable radial pipe joints. Sockets of adjustable radial pipe connections form T with connecting metric thread
CSN 13 7627-1972 Mechanical engined pipe joints. Sockets of adjustable pipe con-nections form T with connecting pipe thread
CSN 11 9451-1981 Unified system of industrial hydraulic components. Filters for thread attachment in pipelines. Connection dimensions
CSN 30 3533-1961 Hydraulic brakes. Screwed connections
CSN 13 7870-1960 Socket of pipe connections form T, with connecting metric thread
CSN 01 4031-1981 Threads for side connections of gas cylinders closing valves
CSN 13 7871-1960 Socket of pipe connections form T, with connecting pipe thread
CSN 37 0913-1981 Switching devices. Connecting threaded bolts to 3 200 A. Rated currepts and dimensions
CSN 13 7521-1973 Reducíng pressure gauge connections with metric female threads and male pipe threads. Np 640

NL-NEN

NEN 2550-1968 Male screw piece, one side outside thread, for three-piece unions for gas- and water conduits
NEN 2551-1968 Male screw piece, one side outside thread, for three-piece unions for gas- and water conduits
NEN 2552-1968 Male screw piece, one side inside thread, for three-piece unions for water conduits
NEN 10999-1993 Connecting devices. Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors (IEC 999: 1990, modified)
NEN 2549-1968 Male screw piece, one side copper tube, for three-piece unions for gas- and water conduits

British Standards Institution (BSI)

BS EN 14420-5:2004 Hose fittings with clamp units - Threaded connections
BS EN 14420-5:2005 Hose fittings with clamp units. Threaded connections
BS EN 14420-5:2013 Hose fittings with clamp units. Threaded connections
BS ISO 13948-1:2015 Diesel engines. Fuel injection pumps and fuel injector low-pressure connections. Threaded connections
BS EN 148-1:2018 Respiratory protective devices. Threads for facepieces. Standard thread connection
BS EN 148-3:1999 Respiratory protective devices: threads for facepieces - Thread connection M 45 x 3
BS EN 148-2:1999 Respiratory protective devices: threads for facepieces - Centre thread connection
BS EN 148-1:1999 Respiratory protective devices: threads for facepieces - Standard thread connection
BS EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Verification by means of limit gauges
BS EN 60998-2-1:2004 Connecting devices for low-voltage circuits for household and similar purposes - Particular requirements for connecting devices as separate entities with screw-type clamping units

FI-SFS

SFS Z.3.27-1929 Kierreliittimet imuletkuille Kierrevarsi
SFS 2447-1969 Steel threaded pipe connection. Double joint pipe
SFS Z.3.26-1929 Kierreliittimet imuletkuille Yhdistelm?
SFS 2445-1969 Steel threaded pipe connection. Connection box for arc tubes 90 and 45

AT-ON

ONORM EN 148 Teil.1-1988 Respiratory protective devices; threads forfacepieces; Standard thread connection
ONORM EN 148 Teil.2-1988 Respiratory protective devices; threads for facepieces; centre thread connection
ONORM EN 148-3-1996 Respiratory protective devices-Threads for facepieces-Thread connection M 45 X 3

BE-NBN

NBN-EN 148-2-1989 Repiratory protective devices-Threadsforfacepieces - Centre thread connection
NBN-EN 148-1-1989 Respiratory protective devices - Threads for facepieces - Standard thread connection
NBN-EN 148-3-1992 Respiratory protective devices. Threads for facepieces. Thread connection M 45 x 3

Society of Automotive Engineers (SAE)

SAE AS4843/2-2015 Fittings, Beaded to Pipe Threaded, Fluid Connection
SAE AS1171-1970 BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP
SAE AS1171B-2022 BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP
SAE AS34121A-2003 CONNECTORS, RECEPTACLE, ELECTRIC, WALL MOUNTING, FRONT RELEASE, CRIMP CONTACT, AN TYPE - WITH ACCESSORY THREADS
SAE AS4842/1-1995 Fittings, 37 Degrees Flared to Pipe Threaded, Fluid Connection
SAE AS1171A-2012 BOSS-FLUID CONNECTION, INTERNAL STRAIGHT THREAD, SHALLOW TAP
SAE AS4842/1-1995(R2007) Fittings, 37° Flared to Pipe Threaded, Fluid Connection
SAE AS4842/1-2015 Fittings, 37° Flared to Pipe Threaded, Fluid Connection
SAE AGS1219-4-1958 AGS1219 Dimensions of Tapped Holes in Components for Connecting A.G.S. Pipe Couplings Direct
SAE AS33566-2000 FITTINGS, INSTALLATION OF FLARELESS TUBE, STRAIGHT-THREADED CONNECTORS FSC 4730; Should Be Used Instead of MS33566, Which Was Cancelled on 14 September 2000
SAE AS95234/8A-2023 CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, JAM NUT, WITH ACCESSORY THREADS
SAE AS95234/8-2019 CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, JAM NUT, WITH ACCESSORY THREADS
SAE AS4875-2015 Fittings, Straight Threaded Boss or Flanged, Fluid Connection
SAE AS930B-1975 FITTING END - STRAIGHT THREAD, BOSS CONNECTION
SAE AS930C-1987 FITTING END - STRAIGHT THREAD BOSS CONNECTION
SAE AS930-1969 FITTING END - STRAIGHT THREAD, BOSS CONNECTION
SAE AGS3094-4-1970 AGS3094 Static Connector (Screwed)
SAE MA2012B-2015 PORT, INTERNAL, STRAIGHT THREAD, FITTING CONNECTION, DESIGN STANDARD, METRIC
SAE AGS978-9-1978 AGS978 Male Flanges (Bolted) (Steel)
SAE AGS3092-4-1970 AGS3092 Pitot Connector (Screwed)
SAE AS4842B-2021 Fittings and Bosses, Pipe Threaded, Fluid Connection, Procurement Specification
SAE AS33566-2013 FITTINGS, INSTALLATION OF FLARELESS TUBE, STRAIGHT-THREADED CONNECTORS
SAE AS1078-2006 FITTING END - FLARED TUBE CONNECTION, EXTENDED THREAD
SAE AIR6151B-2019 Torque, Threaded Application, Electrical Connector, Accessory and Terminal Board Installation
SAE AGS980-6-1958 AGS980 Female Flanges (Bolted) (Aluminium Alloy)
SAE AS178-4-1940 AS178-185 Connector, Chain. Internal Thread
SAE AS4842-2015 Fittings and Bosses, Pipe Threaded, Fluid Connection
SAE AGS977-10-1958 AGS977 Male Flanges (Bolted) (Aluminium Alloy)
SAE AS7770-2-1959 AS7770-7777 Connector. Chain, Internal Thread
SAE AS4875/1A-2016 Fittings, Straight Thread Boss or Flanged 37° Flared, Fluid Connection
SAE AS95234/2-2019 CONNECTOR, RECEPTACLE, SQUARE FLANGE, REVERSE BAYONET COUPLING, BOX MOUNT, FRONT, NO ACCESSORY THREAD
SAE AS5039-2013 FITTING, BODY END - THREADED COUPLING, RIGID, SELF-BONDING, DESIGN STANDARD
SAE AS5948-2013 FITTING, BULKHEAD END - THREADED COUPLING, RIGID, SELF-BONDING, DESIGN STANDARD
SAE AS4875/1-1995 Fittings, Straight Thread Boss or Flanged to 37 Degree Flared, Fluid Connection
SAE AS95234/3-2019 CONNECTOR, RECEPTACLE, REVERSE BAYONET COUPLING, SQUARE FLANGE, BOX MOUNT, REAR, NO ACCESSORY THREAD
SAE AS1859-2002 FITTING END, NON-REVERSIBLE STRAIGHT THREAD, BOSS CONNECTION
SAE AGS987-6-1978 AGS987 Female Flanges (Bolted.) with Spigot (Steel)
SAE MA2521A-2023 NUT - HEX, PORT FITTING CONNECTOR, AMS5639, MJ THREAD, METRIC

U.S. Military Regulations and Norms

ARMY MIL-C-50903 VALID NOTICE 2-2013 Connector, Male, Assembly for M18A1 APERS Mine

SAE - SAE International

SAE AS4842/1A-2016 Fittings, 37 Degrees Flared to Pipe Threaded, Fluid Connection
SAE AS4843/2A-2016 Fittings, Beaded to Pipe Threaded, Fluid Connection
SAE AS95234/8-2014 CONNECTOR@ RECEPTACLE@ REVERSE BAYONET COUPLING@ JAM NUT@ WITH ACCESSORY THREADS
SAE AS930D-1987 FITTING END - STRAIGHT THREAD BOSS CONNECTION
SAE AS3077-1973 Lockring-Fluid Connection Boss Insert@ Internal Straight Thread
SAE AS4842A-2016 Fittings and Bosses, Pipe Threaded, Fluid Connection, Procurement Specification
SAE AS1078-1969 Fitting End - Flared Tube Connection@ Extended Thread
SAE AIR6151-2011 Torque@ Threaded Application@ Electrical Connector and Accessory Installation
SAE AS1078A-2015 Fitting End - Flared Tube Connection@ Extended Thread
SAE AS5039-2007 FITTING@ BODY END - THREADED COUPLING@ RIGID@ SELF-BONDING@ DESIGN STANDARD
SAE AS95234/3-2014 CONNECTOR@ RECEPTACLE@ REVERSE BAYONET COUPLING@ SQUARE FLANGE@ BOX MOUNT@ REAR@ NO ACCESSORY THREAD
SAE AS1859A-2002 Fitting End@ Non- Reversible@ Straight Thread@ Boss Connection
SAE AS1859-1987 Fitting End@ Non- Reversible@ Straight Thread@ Boss Connection
SAE AS95234/2-2014 CONNECTOR@ RECEPTACLE@ SQUARE FLANGE@ REVERSE BAYONET COUPLING@ BOX MOUNT@ FRONT@ NO ACCESSORY THREAD
SAE AS5948-2007 FITTING@ BULKHEAD END - THREADED COUPLING@ RIGID@ SELF-BONDING@ DESIGN STANDARD

RO-ASRO

STAS 7601-1966 Petroleum equipment. Conical threaded gauge for checking special threads of special connecting pipes
STAS 6852-1989 MICROSCOPES Threaded connection for objectives

SCC

AS 2475:1982 Threaded hose connection fittings for bituminous materials
VDI 2230 BLATT 1-2015 Systematic calculation of highly stressed bolted connections — Cylindrical single-screw connections
NS 1703:1966 Threaded connections for valves and accessories (according to ISO/R7)
ADS AS8505-8506 Connector Chain Internal Thread (8 U.N.C.)
ADS AS7770-7777 Connector. Chain, Internal Thread
DIN 16263 E:2024 Draft Document - PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
NS 1705:1966 Internal threaded connections for valves and accessories — Normal length
DANSK DS/ISO 4102:1992 Agricultural sprayers - Connection threading
NS 1704:1966 External threaded connections for valves and accessories — Normal length
UNE 60715-2:2002 Flexible hoses for connection of installations to burning appliances. Assemblies of flexible connection with security socket and thread. Part 2: Continuous helicoidal corrugated stainless steel flexible connection assemblies.
DIN 58725 E:2010 Draft Document - Production in optical engineering - Screwed connection with fitting part
MIL MIL-DTL-52525/12D-2011 Fittings, Hose, Screw on to Split-Flange 90 Degrees Bent
MIL MIL-DTL-52525/12E-2019 Fittings, Hose, Screw on to Split-Flange 90 Degrees Bent
BS EN 148-3:1992 Respiratory protective devices: threads for facepieces-Specification for thread connection M 45 x 3
NS-EN 148-3:1992 Respiratory protective devices — Threads for facepieces — Thread connection M 45 x 3
BS 6362:1984 Specification for stainless steel tubes suitable for screwing in accordance with BS 21 'Pipe threads for tubes and fittings where pressure-tight joints are made on the threads'
BS 7156-2:1990 Respiratory protective devices: threads for facepieces-Specification for centre thread connection
BS 7156-1:1990 Respiratory protective devices: threads for facepieces-Specification for standard thread connection

VDI - Verein Deutscher Ingenieure

VDI 2230 Blatt 1-1998 Systematic calculation of high duty bolted joints - Joints with one cylindrical bolt
VDI 2230 Blatt 1-2001 Systematic calculation of high duty bolted joints - Joints with one cylindrical bolt

European Committee for Standardization (CEN)

EN 148-2:1987/A1:1987 AMD 1 Respiratory Protective Devices; Threads for Facepieces; Centre Thread Connection
EN 148-3:1999 Respiratory protective devices - Threads for facepieces - Part 3: Thread connection M 45×3
EN 148-2:1992 CORRIGENDUM Respiratory Protective Devices; Threads for Facepieces; Centre Thread Connection
EN 148-2:1999 Respiratory protective devices - Threads for facepieces - Part 2: Centre thread connection
EN 148-3:1992 Respiratory protective devices; threads for facepieces; thread connection M 45 3

DE-VDA

VDA 235-102-1996 Types of surface protection for metric threaded connections

SE-SIS

SIS SMS 1209-1953 Accessories. Corner connector. External thread. Rated pressure: 16
SIS SMS 1204-1953 Fitting, angle connector, external thread, pressure rating: 16
SIS SMS 1205-1953 Accessories. T connector. External thread. Rated pressure: 16
SIS SMS 1203-1953 Accessories. Corner connector. External thread. Rated pressure: 16
SIS SMS 1524-1950 Connecting screw, LS type, M thread: SMS2
SIS SS 2178-1989 Jointing hexagon nuts — ISO metric screw threads
SIS SS-EN 148-3-1992 Respiratory protective devices — Threads for facepieces — Thread connection M 45x3
SIS SS-EN 148-2-1990 Respiratory protective devices — Threads for facepieces — Centre thread connection
SIS SS-EN 148-1-1990 Respiratory protective devices — Threads for facepieces — Standard thread connec- tion
SIS SMS 1158-1969 Fire lighting equipment. Coupling part 63 for pressure hose xternally threaded
SIS SMS 1179-1969 Fire fighting equipment. Coupling part 32 jor pressure hose nternally threaded
SIS SMS 1180-1969 Fire fighting equipment. Coupling part 32 for pressure hose xternally threaded
SIS SMS 1157-1969 Fire fighting equipment. Coupling part 63 for pressure hose Internally threaded

Association of German Mechanical Engineers

DVS 2240-1-2004 Threaded inserts for joining molded plastic parts

Defense Logistics Agency

DLA MIL-DTL-52525/5 D-2011 FITTINGS, HOSE, SCREW-ON TO 37?FLARE FEMALE SWIVEL, STRAIGHT
DLA MS18196 REV E REINST NOTICE 4-2009 JACKSCREW, ELECTRICAL CONNECTOR, MALE AND FEMALE, FIXED
DLA MS18196 REV F (1)-2013 JACKSCREW, ELECTRICAL CONNECTOR, MALE AND FEMALE, FIXED
DLA MIL-DTL-52525/3 D-2011 FITTINGS, HOSE, SCREW-ON TO 37?FLARE FEMALE SWIVEL, 90?BENT TUBE, SHORT DROP
DLA MS27567 REV A-2013 DUMMY, CONNECTOR, ELECTRICAL, MALE
DLA MIL-DTL-32372/12-2011 FITTING, ADAPTER, TEE, HYDRAULIC AND PNEUMATIC, NPTF MALE ON BRANCH TO ORFS MALE RUN TO RUN
DLA MS18195 REV C-2012 JACKSCREWS, ELECTRICAL CONNECTORS MALE AND FEMALE, SHORT TURNABLE
DLA MS18194 REV D REINST NOTICE 4-2009 JACKSCREW, ELECTRICAL CONNECTOR MALE AND FEMALE, LONG, TURNABLE
DLA MIL-C-12520/13 A VALID NOTICE 4-2013 Cover and Chain Assemblies (Internal Threads, for use on Waterproof Connectors)
DLA MIL-C-12520/12 A VALID NOTICE 4-2013 Cover and Chain Assemblies (External Threads, for use on Waterproof Connectors)

CEN - European Committee for Standardization

EN 148-2:1987 Respiratory Protective Devices; Threads for Facepieces; Centre Thread Connection

CU-NC

NC 90-11-1971 Manometer Accessories. Connecting Piece with Doubles Sided Metric Thread.

YU-JUS

JUS K.R1.082-1990 ?ore ?rilling eqaipment. Drill rorfs substitutes (Piu thread < Box thread)
JUS K.R1.083-1990 ?ore ?rilling eguipment. Drill rods substitvtes (Fin tbread > Box thread)
JUS K.R1.086-1990 ?ore drilling equlpatent. Pishing rod substitutes (Pin thread < Box thread)
JUS M.B5.113-1986 Pipes and rubber hoses connections. Qufck connect. Male member coupling internat threaded forpipes.

NO-SN

NS 1703-1966 Threaded connections for valves and accessories (according to ISO/R7)
NS 1705-1966 Internal threaded connections for valves and accessories - Normal length
NS 1704-1966 External threaded connections for valves and accessories - Normal length

American National Standards Institute （ANSI)

ANSI/ASME B1.20.7-1991 Hose Coupling Screw Threads – Inch

Japanese Industrial Standards Committee (JISC)

JIS B 2303:1995 Screwed drainage fittings

International Electrotechnical Commission (IEC)

IEC 60130-4:1966 Connectors for frequencies below 3 MHz. Part 4 : Circular multipole connectors with threaded coupling
IEC 60130-4A:1970 Connectors for frequencies below 3 MHz. Part 4 : Circular multipole connectors with threaded coupling.
IEC 60169-21:1985 Radio-frequency connectors. Part 21 : Two types of radio-frequency connectors with inner diameter of outer conductor 9.5 mm (O.374 in) with different versions of screw coupling - Characteristic impedance 50 ohms (Types SC-A and SC-B)
IEC 60999-2:2003 Connecting devices - Electrical copper conductors; Safety requirements for screw-type and screwless-type clamping units - Part 2: Particular requirements for clamping units for conductors from 35 mm<(hoch)2> up to 300 mm<(hoch)2> (included)

IT-UNI

UNI 5214-1970 Non-alloy steel threaded connecting pipes for gas pipes. List of common categories
UNI 7668-1977 Threaded pipes and threaded connection pipes for grease injectors
UNI 5193-1970 Forgeable iron threaded connecting pipes for gas pipelines. List of common categories
UNI 338-1966 Cylindrical gas pipe threads for non-sealing connections on threads
UNI 3466-1954 Threaded joints for ship piping systems. bolted box

ESDU - Engineering Sciences Data Unit

ESDU 14003-2013 Guide to bolted joints and screw threads data

Danish Standards Foundation

DS/EN 148-2/AC 1:1992 Respiratory protective devices. Threads for facepieces. Centre thread connection
DS/ISO 228/2:1985 Pipe threads where pressure-tight joints are not made on the threads. Part 2: Verification by means of limit gauges

CH-SNV

VSM 10315.3-1953 Thread name. Thread type, abbreviation
VSM 13155-1966 pipeline. Pipe bolt connection. Pipe outer diameter, connecting threads and sealing gaskets

IL-SII

S.I.449-1970 THREADED COUPLINGS FOR FIRE FIGHTING APPLIANCES

VN-TCVN

TCVN 1321-1972 Pipeline fittings.Malleable cast iron connectors with taper thread used for pipelines.Shouldered female fittings

Korean Agency for Technology and Standards (KATS)

KS C IEC 60998-2-1:2012 Connecting devices for low voltageCircuits for household and similar purposes-Part 2-1:Particular requirements forconnecting divices as separate entities with screw-typeClamping units
KS C IEC 60998-2-1:2014 Connecting devices for low-voltage circuits for household and similar purposes－Part 2-1：Particular requirements for connecting devices as separate entities with screw-type clamping units
KS C IEC 60998-2-2:2012 Connecting devices for low-voltage circuits for household and similar purposes－Part 2-2：Particular requirements for connecting devices as separate entities with screwless-type clamping units

TH-TISI

TIS 1271-1995 Threaded end connection piston type water meter
TIS 1632-1998 Radio.frequency connectors.part 21: two type of radio.frequency connectors with inner diameter of outer conductor 9.5 mm.(0.374 in) with different version of screw coupling.characteristic impedance 50 ohms (type sc.a and sc.b)

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS1454-2010 ROD, CONTINUOUS THREAD Rev 4

HU-MSZT

MSZ 11031-1980 Precision grade of welded pipe head connecting thread

Others: Special threaded connectors