Product size error

Product size error, Total:407 items.

The international standard classification for "Product size error" includes: Aircraft and space vehicles in general , Ceramic products , Limits and fits , Abrasives , Mechanical engineering drawings , Rubber and plastics products in general .

The Chinese standard classification for "Product size error" includes: Basic standards and general methods , Daily use ceramics products , Measuring tool and instrument , Microcircuit in general , Grinding material and apparatus , Basic standards and general methods , Casting , Rubber seal , Office supplies and office implements .

Professional Standard - Aerospace

QJ 3194-2004 The measurement method for roundness of large dimension

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 40742.4-2021 Geometrical product specifications (GPS)—Geometrical precision verification—Part 4：Evaluation of dimension and geometrical error，discriminant pattern of minimum zone
GB/T 3672.1-2002 Rubber--Tolerances of products--Part 1:Dimensional tolerances
GB/T 3301-1999 Standard method for measurement of volume，rim diameter allowance，hight allowance，weight allowance and size of defects of domestic ceramic ware
GB/T 38762.3-2020 Geometrical product specifications(GPS)—Dimensional tolerancing—Part 3:Angular sizes
GB/T 38762.1-2020 Geometrical product specifications(GPS)—Dimensional tolerancing—Part 1:Linear sizes
GB/T 42124.3-2025 Geometrical product specifications(GPS)—Dimensional and geometrical tolerances for moulded parts—Part 3: General dimensional and geometrical tolerances and machining allowances for castings
GB/T 38762.2-2020 Geometrical product specifications(GPS)—Dimensional tolerancing—Part 2:Dimensions other than linear or angular sizes
GB/T 19325-2003 Coated abrasive products―Dimensional tolerances on non-STANDARD conversions
GB/T 15754-2025 Geometrical product specifications (GPS)—Dimensioning and tolerancing—Cones
GB/T 3301-2023 Test method for determination of specification allowance and size of defects of domestic ceramic ware

Professional Standard - Railway

TB 347-1985 Limit deviation of communication signal products without tolerance dimensions

Professional Standard - Machinery

JB/T 10744-2007 Coated abrasive products-Dimensional tolerances on non-standard conversions
JB/T 10590-2006 Coated abrasive products -- Dimensional tolerances on non-standard conversions
JB 10590-2006 Coated abrasive products-Dimensional tolerances on non-standard conversions (ISO 8366:1987, MOD)

未注明发布机构

AA ANSI H35.2(M)-2024 Dimensional Tolerances for Aluminum Mill Products

Professional Standard - Aviation

HB 5522-1980 Dimensional tolerances for molded rubber products

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1825-2016 Regulations on tolerances for jewelry size measurement

Professional Standard - Education

JY 0027-1993 The limit errors without tolerance indication on drawings and technical documents for educational equipment

BE-NBN

NBN 268-1953 Dimensions and errors of copper products and copper alloy products used daily, and forged products
NBN-ISO 3302:1994 Rubber. Dimensional tolerances for use with products
NBN T 31-013-1979 Rubber - Dimensional tolerances of solid moulded and extruded products
NBN E 03-004-1986 Thread processing. Metric Triangular ISO Dimensions, Limits and Tolerances
NBN B 15-236-1983 Formed concrete testing. Dimensions and tolerances of cast test tubes

Bureau of Indian Standards

IS 16752-2018 Rubber- Tolerance for Products- Dimensional Tolerances
IS/ISO 16160-2012 Hot-Rolled Steel Sheet Products Dimensional And Shape Tolerances
IS 18229-3-2023 Geometrical Product Specifications (Gps) —— Dimensional Tolerancing: Part 3 Angular Sizes
IS 3739-1987 Dimensional tolerances for carbon and alloy constructional steel products
IS 18229-1-2023 Geometrical product specifications (GPS) —— Dimensional tolerancing: Part 1 Linear sizes
IS 18229-2-2023 Geometrical Product Specifications (Gps) —— Dimensional Tolerancing: Part 2 Dimensions Other Than Linear Or Angular Sizes
IS 18257-4-2024 Technical Product Documentation (TPD)-Indication of Dimensions and Tolerances - Part 4 Dimensioning of Shipbuilding Drawings
IS/ISO 16162-2012 Cold-Rolled Steel Sheet Products - Dimensional and Shape Tolerances ( First Revision )

Korean Agency for Technology and Standards (KATS)

KS M ISO 3302-1:2008 Rubber － Tolerances for products － Part 1: Dimensional tolerances
KS M ISO 3302-1-2023 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-1-2018(2023) Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-1:2018 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-1-2018 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS B ISO 14405-1-2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS B ISO 14405-1:2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS B ISO 14405-2-2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS B ISO 14405-2:2017 Geometrical product specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS B ISO 3040:2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Cones
KS B ISO 3040-2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Cones
KS D ISO 16162-2013 Continuously cold－rolled steel sheet products－Dimensional and shape tolerances
KS B ISO 14405-1-2022 Geometrical Product Specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
KS D ISO 16160-2013 Continuously hot－rolled steel sheet products－Dimensional and shape tolerances
KS D ISO 16160:2005 Continuously hot-rolled steel sheet products-Dimensional and shape tolerances
KS B ISO 14405-2-2022 Geometrical Product Specifications(GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes
KS D ISO 16160:2013 Continuously hot－rolled steel sheet products－Dimensional and shape tolerances
KS B 0417-2014(2019) Permissible deviations in dimensions without tolerance indication for metallic sintered products
KS B ISO 3040-2024 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Cones
KS D ISO 16163-2020 Continuously hot-dipped coated steel sheet products－Dimensional and shape tolerances
KS D ISO 16160-2005(2010) Continuously hot－rolled steel sheet products－Dimensional and shape tolerances
KS D ISO 16162-2005(2010) Continuously cold－rolled steel sheet products－Dimensional and shape tolerances
KS B ISO 3040:2016 Geometrical Product Specifications(GPS) — Dimensioning and tolerancing — Cones
KS B ISO 3040:2014 Geometrical Product Specifications(GPS) — Dimensioning and tolerancing — Cones
KS B ISO 10579:2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Non-rigid parts
KS D ISO 16163-2015(2020) Continuously hot-dipped coated steel sheet products－Dimensional and shape tolerances
KS B ISO 10579-2019 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Non-rigid parts
KS D ISO 16162:2005 Continuously cold-rolled steel sheet products-Dimensional and shape tolerances
KS D ISO 16162:2013 Continuously cold－rolled steel sheet products－Dimensional and shape tolerances
KS B 0236-1989 Permissible Deviation in Dimensions without Tolerance Indication of dimensions
KS B ISO 10579:2014 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Non-rigid parts
KS B ISO 2538-2-2016 Geometrical product specifications (GPS) — Wedges — Part 2: Dimensioning and tolerancing
KS B ISO 10579-2024 Geometrical product specifications(GPS) — Dimensioning and tolerancing — Non-rigid parts
KS B ISO 10579:2009 Technical drawings-Dimensioning and tolerancing-Non-rigid parts
KS D ISO 16163:2015 Continuously hot-dipped coated steel sheet products-Dimensional and shape tolerances
KS B ISO 2538-2:2021 Geometrical product specifications(GPS) — Wedges —Part 2: Dimensioning and tolerancing

American National Standards Institute （ANSI)

ANSI H35.2-2009 Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2M-2017 Dimensional Tolerances for Aluminum Mill Products (Metric)
ANSI H35.2M-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2M-2006 Dimensional Tolerances for Aluminum Mill Products (Metric)
ANSI H35.2-2017 American National Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2M-2009 American National Standard Dimensional Tolerances for Aluminum Mill Products, 2009
ANSI B4.3-1978 General Tolerances for Metric Dimensioned Products
ANSI H35.2-2006 Dimensional Tolerances for Aluminum Mill Products

The Aluminum Association

AA H35.2(M)-2009 Dimensional Tolerances for Aluminum Mill Products [Superseded: SAE MAM 2202C, SAE MAM 2202B, SAE MAM 2204C, SAE MAM 2204B]
AA H35.2-2009 Dimensional Tolerances for Aluminum Mill Products
AA ANSI H35.2-2017 American National Standard Dimensional Tolerances for Aluminum Mill Products 2017
AA H35.2(M)-2003 Dimensional Tolerances for Aluminum Mill Products
AA ANSI H35.2(M)-2013 Dimensional Tolerances for Aluminum Mill Products
AA H35.2-2003 Dimensional Tolerances for Aluminum Mill Products

Magyar Szabványügyi Testület

MSZ 7255-1960 Dimensional error of hot hard extruded plastic products

British Standards Institution (BSI)

BS EN ISO 14405-1:2016 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS ISO 3302-1:2014 Rubber. Tolerances for products. Dimensional tolerances
BS 3734-1:1997 Rubber. Tolerances for products. Dimensional tolerances
BS EN 10278:1999 Dimensions and tolerances of bright steel products
BS EN ISO 14405-1:2011 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS EN ISO 14405-3:2017 Geometrical product specifications (GPS). Dimensional tolerancing. Angular sizes
BS EN ISO 14405-1:2010 Geometrical product specifications (GPS). Dimensional tolerancing. Linear sizes
BS EN ISO 14405-2:2019 Geometrical product specifications (GPS). Dimensional tolerancing. Dimensions other than linear or angular sizes
24/30463912 DC Geometrical product specifications (GPS) — Dimensional tolerancing - Part 1: Linear sizes
BS EN ISO 14405-2:2011 Geometrical product specifications (GPS). Dimensional tolerancing. Dimensions other than linear sizes
13/30278121 DC BS ISO 3302-1. Rubber. Tolerances for products. Part 1. Dimensional tolerances
BS 7007-3:1988 Abrasive products. Specification for dimensional tolerances on non-standard coated abrasive products
BS ISO 129-5:2018 Technical product documentation. Indication of dimensions and tolerances - Dimensioning of structural metal work
BS ISO 16162:2005 Continuously cold-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16160:2012 Hot-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16162:2010 Continuously cold-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16160:2005 Continuously hot-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 16160:2011 Continuously hot-rolled steel sheet products. Dimensional and shape tolerances
BS 7007-5:1994 Abrasive products - Specification for dimensions, tolerances and designation of abrasive belts
BS ISO 129-4:2013 Technical product documentation (TPD). Indication of dimensions and tolerances. Dimensioning of shipbuilding drawings
BS ISO 3040:2010 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
11/30250122 DC BS ISO 16162. Cold-rolled steel sheet products. Dimensional and shape tolerances
12/30250143 DC BS ISO 16160. Hot-rolled steel sheet products. Dimensional and shape tolerances
BS EN ISO 3040:2012 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
BS EN ISO 2538-2:2014 Geometrical product specifications (GPS). Wedges. Dimensioning and tolerancing
17/30358444 DC BS EN ISO 14405-2 AMD1. Geometrical product specifications (GPS). Dimensional tolerancing - Part 2. Dimensions other than linear sizes
BS ISO 16163:2005 Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
BS ISO 16163:2010 Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
BS EN ISO 8062-3:2023 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
BS 7007-6:1994 Abrasive products. Specification for dimensions, tolerances and designation of abrasive sheets
BS ISO 16163:2012 Continuously hot-dipped coated steel sheet products. Dimensional and shape tolerances
BS EN ISO 3040:2016 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
10/30207386 DC BS ISO 16160. Continuously hot-rolled steel sheet products. Dimensional and shape tolerances
BS ISO 3040:2009 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
BS ISO 16162:2012 Cold-rolled steel sheet products. Dimensional and shape tolerances
10/30207389 DC BS ISO 16162. Continuously cold-rolled steel sheet products. Dimensional and shape tolerances
12/30246960 DC BS EN ISO 2538-2. Geometrical product specifications (GPS). Wedges. Dimensioning and tolerancing
BS EN ISO 129-1:2019 Technical product documentation (TPD). Presentation of dimensions and tolerances-General principles
BS ISO 129-1:2018 Technical product documentation (TPD). Presentation of dimensions and tolerances-General principles
BS EN ISO 129-1:2019+A1:2021 Technical product documentation (TPD). Presentation of dimensions and tolerances - General principles
BS EN ISO 10579:2013 Geometrical product specifications (GPS). Dimensioning and tolerancing. Non-rigid parts
BS ISO 10579:2010 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non - rigid parts

Indonesia Standards

SNI 05-2639-1992 Permissible deviation without tolerance indication for die casting

Danish Standards Foundation

DANSK DS/EN 10278:2002 Dimensions and tolerances of bright steel products
DS/ISO 3302-1:2011 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DS/ISO 3302-1/Amd. 1:2011 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DANSK DS/ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DS/EN 10278:2002 Dimensions and tolerances of bright steel products
DS/EN ISO 14405-1:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
DS/EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
DS/ISO 3302:1984 Rubber. Dimensional tolerances of solid moulded and extruded products
DANSK DS/EN ISO 14405-1:2016 Geometrical product specifications (GPS) – Dimensional tolerancing – Part 1: Linear sizes (ISO 14405-1:2016)
DANSK DS/EN ISO 14405-3:2017 Geometrical product specifications (GPS) – Dimensional tolerancing – Part 3: Angular sizes (ISO 14405-3:2016)
DS/EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
DANSK DS/EN ISO 3040:2016 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Cones
DANSK DS/EN ISO 14405-2:2019 Geometrical product specifications (GPS) – Dimensional tolerancing – Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
DANSK DS/ISO 8062-3:2023 Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
DS/EN ISO 10579:2013 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
DANSK DS/EN ISO 10579:2013 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
DANSK DS/EN ISO 8062-3:2023 Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2...
DANSK DS/ISO 129-4:2013 Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 4: Dimensioning of shipbuilding drawings
DS/ISO 129-4:2013 Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 4: Dimensioning of shipbuilding drawings
DS 3014:1981 Wrought copper and copper alloys. Cold-rolled flat products delivered in straight lengths (sheet). Dimensions and tolerances
DANSK DS/ISO 10579:2010 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts

American Society of Mechanical Engineers (ASME)

ASME B4.3-1978 General tolerances for metric dimensioned products
ASME B4.3-1978(R2004) General Tolerances for Metric Dimensioned Products

European Committee for Standardization (CEN)

EN 10278:1999 Dimensions and tolerances of bright steel products
EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
EN ISO 14405-1:2010 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
EN ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
prEN ISO 14405-1 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO/DIS 14405-1:2024)
EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes
EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
EN 10218-2:2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances

IT-UNI

UNI 8104-P2-1980 Construction industry. Size deviation. Error measurement method
UNI 5681-1973 Hot rolled steel finished products. T sections with sharp edges. Dimensions and tolerances.
UNI 7226-P3-1989 Technical drawings. Geometric error sign. Symbols and dimensioning of contour deviations
UNI 6012-1974 Hot rolled steel products 0. General purpose steel bars 19. Dimensions and deviations

German Institute for Standardization

DIN EN 10278:1999 Dimensions and tolerances of bright steel products; German version EN 10278:1999
DIN 7715-40:1998 Rubber products - Dimmensional tolerances; hoses
DIN ISO 3302-1:2018 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DIN ISO 3302-1 E:2016-10 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DIN 862 E:2013-02 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 862 E:2014-06 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 862 E:2011-10 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN EN 10278-1999 ENG Dimensions and tolerances of bright steel products
DIN 862:2015-03 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 862 E:2005-12 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN EN 485-4:2019 Aluminium and aluminium alloys - Sheet, strip and plate - Part 4: Tolerances on shape and dimensions for cold-rolled products
DIN-Fachbericht ISO/TR 16570:2008 Geometrical product specifications - Linear dimensioning and tolerancing: ? limit deviations - Step dimensions, dimensions, distances, angular sizes and radii (ISO/TR 16570:2004)
DIN EN ISO 14405-1:2017-07 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016); German version EN ISO 14405-1:2016
DIN 59382:1975 Dimensions, dimensional tolerances and geometric tolerances for cold-rolled stainless steel flat products, strips and sheets
DIN 862 E:2014 Draft Document - Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 862:2015 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN ISO 3302-1:1999-10 Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:1996)
DIN EN ISO 14405 E:2006 Draft Document - Geometrical Product Specification (GPS) - Dimensional Tolerancing - Linear Sizes (ISO/DIS 14405:2006); German version prEN ISO 14405:2006
DIN EN ISO 14405 E:2006-09 Draft Document - Geometrical Product Specification (GPS) - Dimensional Tolerancing - Linear Sizes (ISO/DIS 14405:2006); German version prEN ISO 14405:2006
DIN EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009); German version EN ISO 3040:2012
DIN ISO 3302-1:1999 Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:1996)
DIN ISO 3302-1:2018 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DIN EN ISO 3040:2016-12 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016); German version EN ISO 3040:2016
DIN EN ISO 14405-2:2019-06 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018); German version EN ISO 14405-2:2019
DIN 59200:2001-05 Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass / Note: To be replaced by DIN EN 10058 (2017-09).
DIN EN ISO 14405-1:2011-04 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)
DIN 59200:2001 Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass
DIN EN ISO 14405-3:2017-07 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016); German version EN ISO 14405-3:2017
DIN ISO 3302-1 E:2016 Draft Document - Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:2014); Text in German and English
DIN EN ISO 14405-1 E:2014-01 Geometric Product Specification (GPS) Dimensional Specifications Tolerances Part 1: Linear Dimensions (Draft)
DIN 59200:1975 Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass
DIN 59200:1959 Flat produts of steel - Hot rolled wide flats - Dimensions, mass, tolerances on dimensions, shape and mass
DIN 509:2022 Technical product documentation - Relief grooves - Types, dimensions and tolerances
DIN EN ISO 14405-2:2012-03 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
DIN 7715-5:1979-11 Rubber products; dimensional tolerances, rubber sheets and products made from sheets
DIN ISO 3302-1:2018-06 Rubber – Tolerances for products – Part 1: Dimensional tolerances
DIN ISO 13942:2001 Bonded abrasive products - Limit deviations and run-out tolerances (ISO 13942:2000)
DIN EN ISO 14405-2 E:2018-09 Technical Product Specification (GPS) Dimensional Tolerances Part 2: Dimensions other than Linear Dimensions (Draft)
DIN EN ISO 10579:2013-11 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011); German version EN ISO 10579:2013
DIN EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
DIN EN ISO 14405-1 E:2024-06 Draft Document - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO/DIS 14405-1:2024); German and English version prEN ISO 14405-1:2024
DIN EN ISO 14405-1 E:2014 Draft Document - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO/DIS 14405-1:2013); German version prEN ISO 14405-1:2013
DIN EN ISO 14405-3 E:2013 Draft Document - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO/DIS 14405-3:2013); German version prEN ISO 14405-3:2013
DIN EN ISO 14405-3 E:2013-08 Draft Document - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO/DIS 14405-3:2013); German version prEN ISO 14405-3:2013
DIN 7715-40:1998-04 Rubber products - Dimmensional tolerances; hoses
DIN 7715-1:1977-02 Rubber products; dimensional tolerances, ebonite products
DIN EN ISO 2538-2:2015-01 Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014); German version EN ISO 2538-2:2014
DIN 509 E:2022-02 Draft Document - Technical product documentation - Relief grooves - Types and dimensions - Tolerances
DIN 509:2022-02 Draft Document - Technical product documentation - Relief grooves - Types and dimensions - Tolerances
DIN EN ISO 14405-2 E:2018 Draft Document - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO/FDIS 14405-2:2018); German and English version prEN ISO 14405-2:2018
DIN 863-1:2017 Geometrical product specifications (GPS) - Micrometers - Part 1: Micrometers for external measurements; maximum permissible errors
DIN EN ISO 3040 E:2011 Draft Document - Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009); German version FprEN ISO 3040:2011
DIN EN ISO 3040:2012-06 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009)
DIN EN ISO 286-1:2019 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013) (includes Corrigendum :2013)
DIN EN ISO 8062-3:2023 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ？ tolerances for indicated dimensions (ISO 8062-3...
DIN EN ISO 14405-2:2018-09 Draft Document - Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO/FDIS 14405-2:2018); German and English version prEN ISO 14405-2:2018
DIN EN 10218-2:2012-03 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances; German version EN 10218-2:2012

Swedish Institute for Standards

SS-EN 10278:1999 Dimensions and tolerances of bright steel products
SS-EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
SS-EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
SS-EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
SS-EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
SS-ISO 3302-1:2016 Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:2014, IDT)
SS-EN 10278:2023 Dimensions and tolerances of bright steel products of stainless and other special steels

Standards Norway

NS-EN 10278:1999 Dimensions and tolerances of bright steel products
NS-EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes (ISO 14405-3:2016)
NS-EN ISO 14405-2:2011 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
NS-EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
NS-EN ISO 14405-1:2010 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes (ISO 14405-1:2010)
NS-EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
NS-EN ISO 3040:2016 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones (ISO 3040:2016)
NS-EN ISO 3040:2012 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones (ISO 3040:2009)
NS-EN ISO 8062-3:2023 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2...

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 3302-1:2016 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
BH GSO ISO 14405-1:2017 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
BH GSO ISO 14405-3:2022 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
BH GSO ISO 14405-2:2016 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes
BH GSO ISO 16160:2016 Hot-rolled steel sheet products -- Dimensional and shape tolerances
BH GSO ISO 16162:2016 Cold-rolled steel sheet products -- Dimensional and shape tolerances
BH GSO ISO 3040:2017 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones
BH GSO ISO 14405-2:2024 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes
BH GSO ISO 129-4:2017 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings
BH GSO ISO 10579:2023 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts

South African Bureau of Standard

SANS 3302-1:2003 Rubber - Tolerances for products Part 1: Dimensional tolerances

Association Francaise de Normalisation

NF T47-001-1*NF ISO 3302-1:2014 Rubber - Tolerances for products - Part 1 : dimensional tolerances
NF ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
NF A47-461*NF EN 10278:1999 Dimensions and tolerances of bright steel products
NF E04-563-3*NF EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3 : angular sizes
NF EN ISO 14405-3:2017 Geometrical Product Specifications (GPS) - Dimensional Tolerancing - Part 3: Angular Sizes
NF EN ISO 14405-1:2016 Geometrical Product Specifications (GPS) - Dimensional Tolerancing - Part 1: Linear Sizes
NF EN 10278:1999 Dimensions and tolerances of cold-formed steel products
NF E04-563-1:2011 Geometrical Product Specification (GPS) - Dimensional tolerancing - Part 1 : linear sizes.
NF E04-563-1*NF EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1 : linear sizes
NF A45-007:1983 IRON AND STEEL. SMALL HOT ROLLED U IRON BARS. DIMENSIONS AND TOLERANCES.
NF EN ISO 14405-2:2019 Geometrical Product Specifications (GPS) - Dimensional Tolerancing - Part 2: Dimensions other than linear or angular sizes
NF A47-401:1992 Cold formed steel products - Drawn bar - Dimensions and tolerances
NF E04-557:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones.
NF E04-557*NF EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
NF EN ISO 3040:2016 Geometric Product Specification (GPS) - Dimensioning and Tolerancing - Cones
NF A45-007:2021 Steel products - Small hot-rolled U-shaped bars - Dimensions and tolerances
NF EN ISO 10579:2013 Geometric Product Specification (GPS) - Dimensioning and Tolerancing - Non-Rigid Parts
NF E04-563-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2 : dimensions other than linear sizes.
NF A32-013:1985 Foundry products. Malleable and spheroidal graphite cast iron products. Dimensional tolerances for sand castings.
NF EN ISO 2538-2:2014 Geometrical Product Specification (GPS) - Corners - Part 2: Dimensioning and tolerancing
NF A47-461*NF EN 10278:2023 Dimensions and tolerances of bright steel products of stainless and other special steels
NF E02-353:2001 Geometrical products specification (GPS) - Chased parts - Dimensional and surface eveness tolerances for dimensions and parts without individual tolerances.
NF EN 10278:2023 Dimensions and tolerances of bright steel products of stainless and other special steels
NF E02-352:1999 Geometrical product specifications (GPS). Cutted and bended workpieces. Dimensional and geometrical tolerances for dimensions and features without individual tolerances.
NF ISO 3096:2018 Bearings - Needles - Overall dimensions, geometric product specification (GPS) and tolerance values
NF EN 10218-2:2012 Steel wire and drawn wire products - General - Part 2: Dimensions and tolerances of wires

International Organization for Standardization (ISO)

ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
ISO 3302-1:1996 Rubber - Tolerances for products - Part 1: Dimensional tolerances
ISO 14405-3:2016 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
ISO 14405-2:2018 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
ISO 14405-1:2010 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
ISO/CD 14405-1 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes
ISO 10579:2010/Cor 1:2011 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts; Technical Corrigendum 1
ISO 3302-1:1996/Amd 1:2001 Rubber - Tolerances for products - Part 1: Dimensional tolerances; Amendment 1: Classification system for flash
ISO 3302:1990 Rubber; dimensional tolerances for use with products
ISO 3302 DAM 1:1991 Rubber; dimensional tolerances for use with products; amendment 1
ISO 16160:2012 Hot-rolled steel sheet products - Dimensional and shape tolerances
ISO 16160:2011 Continuously hot-rolled steel sheet products. Dimensional and shape tolerances
ISO 14405-2:2011/DAmd 1 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear sizes — Amendment 1
ISO 8062-3:2007/cor 1:2009 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings; Technical Corrigendum 1
ISO 1206:2001 Rolling bearings - Needle roller bearings, dimension series 48, 49 and 69 - Boundary dimensions and tolerances
ISO 14405-2:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
ISO 14405-1:2010/DAmd 1 Geometrical product specifications (GPS) — Dimensional tolerance — Part 1: Linear sizes — Amendment 1
ISO 16162:2005 Continuously cold-rolled steel sheet products - Dimensional and shape tolerances
ISO 3040:2009 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
ISO 286-1:2010/cor 1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits; Technical Corrigendum 1
ISO 16160:2005 Continuously hot-rolled steel sheet products - Dimensional and shape tolerances
ISO 16162:2010 Continuously cold-rolled steel sheet products — Dimensional and shape tolerances
ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
ISO 16162:2000 Continuously cold-rolled steel sheet products - Dimensional and shape tolerances
ISO 3096:1996/cor 1:1999 Rolling bearings - Needle rollers - Dimensions and tolerances; Technical Corrigendum 1
ISO 16163:2010 Continuously hot-dipped coated steel sheet products —Dimensional and shape tolerances
ISO 16163:2005 Continuously hot-dipped coated steel sheet products - Dimensional and shape tolerances
ISO 3302:1976/Amd 1:1983 Rubber — Dimensional tolerances of solid moulded and extruded products — Amendment 1
ISO 16162:2012 Cold-rolled steel sheet products - Dimensional and shape tolerances
ISO 3040:2009/DAmd 1.2 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones — Amendment 1
ISO 8062-3:2023 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
ISO 129-5:2018 Technical product documentation - Indication of dimensions and tolerances- Part 5:Dimensioning of structural metal work
ISO 129-4:2013 Technical product documentation (TPD) - Indication of dimensions and tolerances - Part 4: Dimensioning of shipbuilding drawings
ISO DIS 129-2:2013 Technical product documentation — Indication of dimensions and tolerances — Part 2: Dimensioning of mechanical engineering drawings
ISO 16163:2000 Continuously hot-dipped coated steel sheet products - Dimensional and shape tolerances
ISO 10579:2010 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
ISO/TR 16570:2004 Geometrical Product Specifications (GPS) - Linear and angular dimensioning and tolerancing: ? limit specifications - Step dimensions, distances, angular sizes and radii

GCC Standardization Organization

GSO ISO 3302-1:2015 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
GSO ISO 14405-1:2015 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
GSO ISO 14405-3:2021 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes
GSO ISO 16162:2013 Cold-rolled steel sheet products -- Dimensional and shape tolerances
GSO ISO 3040:2015 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones
GSO ISO 14405-2:2013 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes
GSO ISO 129-4:2015 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings
GSO ISO 14405-2:2024 Geometrical product specifications (GPS) — Dimensional tolerancing — Part 2: Dimensions other than linear or angular sizes
GSO ISO 22034-2:2013 Steel wire and wire products -- Part 2: Tolerances on wire dimension
GSO ISO 10579:2023 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 3302-1:2015 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances
OS GSO ISO 14405-1:2015 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
OS GSO ISO 14405-2:2013 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 2: Dimensions other than linear sizes
OS GSO ISO 3040:2015 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones
OS GSO ISO 129-4:2015 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning of shipbuilding drawings

Spanish Association for Standardization (UNE)

UNE-EN 10278:2000 DIMENSIONS AND TOLERANCES OF BRIGHT STEEL PRODUCTS
UNE-EN 10278:2003 ERRATUM DIMENSIONS AND TOLERANCES OF BRIGHT STEEL PRODUCTS
AENOR UNE-EN 10278:2000 DIMENSIONS AND TOLERANCES OF BRIGHT STEEL PRODUCTS
UNE-ISO 3302-1:2023 Rubber. Tolerances for products. Part 1. Dimensional tolerances
UNE 53508-1:2001 Rubber. Tolerances for products. Part 1: Dimensional tolerances.
UNE-EN ISO 14405-1:2018 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
UNE 36549:1981 STEEL PRODUCTS. SECTIONS FOR SHIPBUILDING. DIMENSIONS AND TOLERANCES
UNE-EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes (ISO 14405-2:2018)
UNE-EN ISO 14405-2:2015 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
UNE-EN ISO 14405-3:2017 Geometrical Product Specifications (GPS) Dimensional Tolerances Part 3: Angular Dimensions (ISO 14405-3:2016)
UNE-EN ISO 286-1:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
AENOR UNE-EN ISO 14405-1:2018 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2016)
UNE-EN ISO 14405-1:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)
UNE-EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
UNE-EN ISO 286-2:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
AENOR UNE-EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)

Lithuanian Standards Office

LST EN 10278-2000 Dimensions and tolerances of bright steel products
LST EN ISO 14405-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes (ISO 14405-2:2011)
LST EN ISO 14405-1:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes (ISO 14405-1:2010)
LST EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2009)
LST EN 10218-2-2012 Steel wire and wire products - General - Part 2: Wire dimensions and tolerances

Ente Nazionale Italiano di Unificazione

UNI 8104-2:1980 Construction. Dimensional tolerances. Methods of measuring errors
UNI EN ISO 14405-1:2011 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
UNI 9049:1986 Vulcanized rubber. Dimensional tolerances of extruded products.
UNI 5679:1973 Hot rolled steel finished products. Ipn beams. Dimensions and tolerances.
UNI EN ISO 14405-1:2016 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 1: Linear sizes
UNI EN ISO 14405-3:2017 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 3: Angular sizes
UNI 7061:1972 Hot rolled finished steel products. Hexagonal bars. Dimensions and tolerances.
UNI CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 2: Rules
UNI EN ISO 14405-2:2012 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear sizes
UNI EN ISO 10579:2013 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts
UNI EN 10218-2:1997 Dimensioni e tolleranze dei fili. Wire dimensions and tolerances.
UNI EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
UNI EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
UNI EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes
UNI 3871:1984 Hot rolled finished steel products. Round bars and wire rod for springs. Dimensions and tolerances.
UNI 8104-5:1983 Construction. Dimensional tolerances. Preferential portion q within the tolerance for series products
UNI EN ISO 8062-3:2024 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
UNI 10233-2:1993 Steel products drawn, peeled rolled and ground bars. Dimensions and dimensional and shape tolerances.
UNI 7063:1978 Semifinished steel products. Dimensions and tolerances.
UNI 6630:1970 Hot rolled steel products. Regular and irregular half round bars. Dimensions and tolerances.
UNI 7812:1983 Finished steel products, cold formed, for structural purposes. Square hollow sections. Dimensions and tolerances.

CZ-CSN

CSN ISO 3302:1993 Rubber. Dimensional tolerances for use with products
CSN 72 6028-1993 Shape and dimension tolerances and tolerances of external defects of ceramic products
CSN 64 0006-1974 Plastics. Tolerances and limit deviations on dimensions of products made of plastics
CSN 63 0100-1978 Dimensional tolerances of technical rubber goods

AT-ON

ONORM C 9410 Teil.1-1980 Rubber products; dimensional tolerances; ebonite products
ONORM C 9410-3-1994 Rubber products - Dimensional tolerances - Extruded rubber (elastomeric) products
ONORM C 9410-2-1994 Rubber products - Dimensional tolerances - Moulded rubber (elastomeric) products
ONORM C 9410-4-1994 Rubber products - Dimensional tolerances - Hoses

Gosstandart of Russia

GOST 26214-1984 Products of wood and wooden materials. Permissible errors in measuring linear dimensions

Japanese Industrial Standards Committee (JISC)

JIS B 0420-1:2016 Geometrical product specifications (GPS) -- Dimensional tolerancing -- Part 1: Linear sizes
JIS B 0411:1978 Permissible deviations in dimensions without tolerance indication for metallic sintered products
JIS G 3192:2005 Dimensions, mass and permissible variations of hot rolled steel sections
JIS G 3192:2008 Dimensions, mass and permissible variations of hot rolled steel sections
JIS B 0028:2017 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones
JIS G 3194:1966 Shape dimensions, weight and tolerance of hot rolled flats steel
JIS G 3192:1994 Dimensions, mass and permissible variations of hot rolled steel sections
JIS G 3192:2014 Dimensions, mass and permissible variations of hot rolled steel sections
JIS G 3192 ERRATUM 1:2000 Dimensions, moss and permissible variations of hot rolled steel sections (Erratum 1)
JIS G 3193:2005 Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strips
JIS G 3192:2021 Dimensions, shape, mass and permissible variations of hot rolled steel sections
JIS G 3193:2008 Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strips
JIS G 3191:1966 Shape, dimensions, weight and tolerance for hot rolled steel bar and bar-in-coil

PL-PKN

PN H83154-1972 Steel castings Dimensional ?olerances. Machining allowan- ces and wieght deviations
PN E06306-1986 Products of ceramic insulating materials Deviations of dimensions, form and position

VN-TCVN

TCVN 2262-1977 Permitted errors when measuring dimensions up to 500 mm
TCVN 7574-2006 Continuously cold-rolled steel sheet products.Dimensional and shape tolerances
TCVN 7573-2006 Continuously hot-rolled steel sheet products.Dimensional and shape tolerances
TCVN 3710-1981 Aquatic products.Errors in chemical tests
TCVN 260-2008 Geometrical Product Specifications(GPS).Linear and angular dimensioning and tolerancing:+/- limit specifications.Step dimensions,distances,angular sizes and radii

IN-BIS

IS 3739-1972 Dimensional tolerances for carbon and alloy structural steel products

CEN - European Committee for Standardization

EN ISO 14405-2:2019 Geometrical product specifications (GPS) - Dimensional tolerancing - Part 2: Dimensions other than linear or angular sizes

SE-SIS

SIS SS-EN 10 131-1992 Cold rolled uncoated low carbon and high yield strength steel flat products for cold forming — Tolerances on dimensions and shape

CH-SNV

VSM 18080.1-1971 Aluminum and aluminum alloys. Forged products, extruded profiles. Dimensional tolerance
SN 234 311-1978 Stopvalves for water supply in buildings
SN 165 000-1988 Solar Energy: Terminology and Definitions
VSM 18687.1-1964 Aluminum and aluminum alloys. Forged Products, Cold Pressed Plate Dimensions and Tolerances
VSM 34403-1974 Nominal dimensions, tolerances, dimensions, extreme dimensions
VSM 15520-1973 Aluminum and aluminum alloys. Forged products, general drawn wire. Dimensions and tolerances

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4533:1998 Coated Abrasive Products - Dimensional Tolerances on Non-Standard Conversions (ISO 8366: 1987)